LV 0-1-10V LED Dimming Driver
Product Information
Product Name: 0/1-10V LED Dimming Driver
Model No.: LV
Features:
- 1 channel 0/1-10V input, 1 channel PWM constant voltage
output. - 0~100% dimming range via logarithmic characteristic can be very
comfortable for human eyes. - Compatible with active or passive 0-10V, 1-10V dimmer, can
solve the fluorescent lamp dimming system compatible with LED
lighting. - PWM frequency 500Hz, 2KHz, 8KHz or 16KHz selectable.
Technical Parameters:
| Input voltage | Input current | Output voltage | Output current |
|---|---|---|---|
| 12-48VDC | 8.5A | 12-48VDC | 1CH,8A |
Output power:
- 96W/192W/288W/384W (12V/24V/36V/48V)
Output type: Constant voltage
Weight:
- Net weight: 0.043kg
- Gross weight: 0.053kg
Dimming data:
| Input signal | Dimming range | Dimming curve | PWM Frequency |
|---|---|---|---|
| 0/1-10V | 0-100% | Logarithmic | 500Hz, 2KHz, 8KHz, 16KHz |
Warranty and Protection:
- Warranty: 5 years
- Protection: Reverse polarity, Short circuit, Over-heat,
Over-load
Safety and EMC:
- EMC standard(EMC): ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17
V3.2.4 - Safety standard(LVD) Certification: EN 62368-1:2020+A11:2020
CE, EMC, LVD
Environment:
- Operation temperature: -20°C to +55°C
- Case temperature (Max.): +85°C
- IP rating: IP20
Mechanical Structures and Installations:
- LED indicator
- GND
- 0/1-10V signal input
- Installation rack
- Setting key
- LED output
- Power input
- 33mm
- 97mm
- 18mm
Wiring Diagram:
- INPUT 0/1-10V + 0/1-10V dimmer
- AC100-240V Power Supply 12-48VDC Constant Voltage
- INPUT 5-36VDC + OUTPUT + Single color LED strip
Notes:
- The 0/1-10V input is operable via commercially available simple
rotary wall switches designed for 0/1-10V dimming equipment or from
dedicated system central dimming controllers. - Compliant with 0-10V, 1-10V, 10V PWM, RX(4 in 1).
- We recommend the number of LED drivers connected to 0/1-10V
dimmer does not exceed 50 pieces. - The maximum length of the wires from dimmer to LED driver
should be no more than 50 meters.
PWM duty(%):
Dimming Curve:
100
Gamma=1.6
90 80 70 60 50 40 30 20 10
1.0 2.0 3.0 4.0 5.0 6.0. 7.0 8.0 9.0 10.0
0/1-10V(V)
Product Usage Instructions
PWM frequency setting:
Long press SET key for 2s, set PWM frequency to 500Hz, LED
indicator flashes once.
Long press SET key for 5s, set PWM frequency to 2KHz, LED
indicator flashes twice.
Long press SET key for 10s, set PWM frequency to 8KHz, LED
indicator flashes 3 times.
Long press SET key for 15s, set PWM frequency to 16KHz, LED
indicator flashes 4 times.
Higher PWM frequency will cause lower output current, higher
power noise, but more suitable for camera (No flickers for
video).
0/1-10V LED Dimming Driver
Model No.: LV
0-10V or 1-10V signal input / Four PWM frequencies / Logarithmic dimming
Features
1 channel 0/1-10V input, 1 channel PWM constant voltage output.
0~100% dimming range via logarithmic characteristic can be very comfortable for human eyes.
Compatible with active or passive 0-10V, 1-10V dimmer, can solve the uorescent lamp dimming system compatible with LED lighting.
PWM frequency 500Hz, 2KHz, 8KHz or 16KHz selectable.
Technical Parameters
Input and Output
Input voltage Input current Output voltage Output current
12-48VDC 8.5A 12-48VDC 1CH,8A
Output power
96W/192W/288W/384W (12V/24V/36V/48V)
Output type
Weight Net weight Gross weight
Constant voltage
0.043kg 0.053kg
Dimming data
Input signal Dimming range Dimming curve PWM Frequency
0/1-10V
0-100% Logarithmic 500Hz2KHz8KHz16KHz
Warranty and Protection
Warranty
5 years
Protection
Reverse polarity Short circuit Over-heat Over-load
Safety and EMC
EMC standard(EMC)
ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Safety standard(LVD) Certification
EN 62368-1:2020+A11:2020 CE,EMC,LVD
Environment Operation temperature Case temperature(Max.) IP rating
Ta: -20OC~ +55OC Tc: +85 OC
IP20
Mechanical Structures and Installations
LEDindicator GND
0/1-10V signal input Installation rack setting key
LED output LED output + Power input Power input + Installation rack
33mm
97mm
18mm
Wiring Diagram
INPUT 0/1-10V
+
0/1-10V dimmer
AC100-240V
Power Supply 12-48VDC Constant Voltage
INPUT 5-36VDC
+
OUTPUT
+
Single color LED strip
+
Notes: The 0/1-10V input is operable via commercially available
simple rotary wall switchs designed for 0/1-10V dimming equipment or from decicated system central dimming controllers. Compliant with 0-10V, 1-10V, 10V PWM, RX(4 in 1). We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 50 pieces, The maximum length of the wires from dimmer to LED driver should be no more than 50 meters.
PWM duty(%)
Dimming Curve
100
Gamma=1.6
90 80 70 60 50 40 30 20 10
1.0 2.0 3.0 4.0 5.0 6.0. 7.0 8.0 9.0 10.0
0/1-10V(V)
User Manual Ver 1.0.8
PWM frequency setting
Long press SET key for 2s, set PWM frequency to 500Hz, LED indicator flashes once. Long press SET key for 5s, set PWM frequency to 2KHz, LED indicator flashes twice. Long press SET key for 10s, set PWM frequency to 8KHz, LED indicator flashes 3 times. Long press SET key for 15s, set PWM frequency to 16KHz, LED indicator flashes 4 times. Higher PWM frequency, will cause lower output current, higher power noise, but more suitable for camera(No flickers for video).
