JYL4046 26 Inch Nickel Classic French Country Iron LED Table Lamp
Product Information:
This product is a portable lamp with a model number JYL4046. It
has a dimension of 13 x 13 x 26H. The lamp comes with a lamp base,
neck, saddle, harp, shade, finial, socket, and bulb. The lamp uses
an on/off type A bulb with a maximum wattage of 60 watts.
Alternatively, it can also be used with a CFL bulb with a maximum
wattage of 13 watts or an LED bulb with a maximum wattage of 9
watts. The package includes an LED 9-watt bulb.
Product Usage Instructions:
- Inspect the item carefully before attempting to install. If
there is any damage or obvious defect, do not install as the item
cannot be returned once installed. - Before using any cleaning solutions, unplug the lamp.
- Dust the shades with a feather duster or an appropriate
vacuum-brush attachment. - Wipe the lamp bases with a soft, dry cloth and clean them using
methods appropriate to the material. Avoid the use of chemicals and
household cleaners as they may damage the finish. - Ensure that you have all the parts indicated in the part list
before beginning assembly. - Assemble the lamp on a soft surface to prevent scratching the
finish during assembly. - Follow the guideline below for safe use and installation to
reduce the risk of fire, electrical shock, or injury to persons or
property:- The external flexible cable or cord of this lamp cannot be
replaced. If the cord is damaged, the lamp should be
destroyed. - The lamp has a polarized plug (one blade is wider than the
other) as a safety feature. It will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless the plug can be fully
inserted. Do not attempt to discard this safety feature.
- The external flexible cable or cord of this lamp cannot be
- Start the assembly process by being careful not to twist the
power cord and tightening it securely. - Insert the harp into the saddle and put the shade on the harp.
Then, tighten the finial into the harp. - Insert the bulb into the socket.
- Put the lamp on a level surface to check if everything is
stable.
WARNING INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disgard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
Lamp base
1X
E
Harp
1X
B
Neck
1X
F
Shade
1X
C
Saddle
1X
G
Finial
1X
D
Socket
1X
H
Bulb
1X
Model# JYL4046 Product Dimensions: 13 x 13 x 26″H
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT THERE IS LED 9-WATT BULB IN THE BOX
1
2
3
F
E H
Step 1 Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
Step2 Insert the Harp (E) into the Saddle (C). Put the shade(F) on the Harp(E), then tighten the Finial (G)into the Harp (E)
Insert the bulb(H) into the socket(D).
Step 3 Put the light on a level surface to check if everything is stable.
