Jonathan Y Jyl4019e Pineapple 23 Inch Classic Vintage Ceramic Led Table Lamp Instruction Manual (+ PDF)

This product is a portable lamp with a model number JYL4019. It
has a lamp base, neck, saddle, harp, shade, finial, socket, and a
bulb. The product dimensions are 13 x 13 x 23H.

Product Usage Instructions

Preparation

Before starting the assembly, ensure that all parts are present.
Compare the parts with the package contents list and the hardware
contents list. If any part is missing or damaged, do not attempt to
assemble the product.

Estimated Assembly Time: 6 minutes.

Important Safety Instructions

Please make sure that you have all parts indicated before you
begin assembly of this item.
This item should be assembled on a soft surface to prevent
scratching the finish during assembly.
To reduce the risk of fire, electrical shock, or injury to
persons or property, please follow the guidelines below for safe
use and installation:

The external flexible cable or cord of this lamp cannot be
replaced. If the cord is damaged, the lamp shall be destroyed.

This portable lamp has a polarized plug (one blade is wider than
the other) as a safety feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Never use with
an extension cord unless the plug can be fully inserted. Do not
attempt to discard this safety feature.

Care and Maintenance

Unplug lamps before using any cleaning solutions. Dust shades
with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with
the methods appropriate to the material. Avoid the use of chemicals
and household cleaners as they may damage the finish.

Part List and Hardware List

Piece Description	Picture	Quantity	Piece Description	Picture	Quantity
Lamp base	Picture of Lamp base	1X	Harp	Picture of Harp	1X
Neck	Picture of Neck	1X	Shade	Picture of Shade	1X
Saddle	Picture of Saddle	1X	Finial	Picture of Finial	1X
Socket	Picture of Socket	1X	Bulb	Picture of Bulb	1X

Usage Instructions

Step 1:

Pull the power cord to connect the Neck (B) to the Lamp base
(A).
Screw the Neck (B) onto the Lamp base (A). Be careful not to
twist the power cord and tighten it securely.

Step 2:

Insert the Harp (E) into the Saddle (C).
Put the shade (F) on the Harp (E), then tighten the Finial (G)
into the Harp (E).
Insert the bulb (H) into the socket (D).

Step 3:

Put the light on a level surface to check if everything is
stable.

Note:

This lamp is designed to use an on/off type A bulb with a
maximum wattage of 60 watts, or a CFL bulb with a maximum wattage
of 13 watts, or an LED bulb with a maximum wattage of 9 watts.
There is an LED 9-watt bulb included in the box.

Enjoy Your Lamp!

View Fullscreen

WARNING INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disgard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

Lamp base

Harp

Neck

Shade

Saddle

Finial

Socket

Bulb

Model# JYL4019 Product Dimensions: 13 x 13 x 23″H

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT THERE IS LED 9-WATT BULB IN THE BOX

E
H
D C

Step 1 Pull power cord to connect the Neck (B) to the Base (A). Screw the Neck (B) onto the Lamp base (A) Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP

Step2 Insert the Harp (E) into the Saddle (C). Put the shade(F) on the Harp(E), then tighten the Finial (G)into the Harp (E)
Insert the bulb(H) into the socket(D).

Step 3 Put the light on a level surface to check if everything is stable.