JYL3087A Ellie 66 Inch Modern Vintage Iron LED Floor Lamp
Product Information
The product is a floor lamp with model number JYL3087. The lamp
has a dimension of 20L X 11W X 66H. The lamp comes with a lamp base
(A), four lamp bodies (B, C, C1, D), three sockets (F), three glass
shades (G), and an LED 4-watt bulb.
Product Usage Instructions
- Inspect the item carefully before attempting to install. If
there is any damage or obvious defect, do not install. The item may
not be returned once it has been installed. - Unplug lamps before using any cleaning solutions. Dust shades
with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with
the methods appropriate to the material. Avoid the use of chemicals
and household cleaners as they may damage the finish. - Please make sure that you have all parts indicated before you
begin assembly of this item. This item should be assembled on a
soft surface to prevent scratching the finish during assembly. - The external flexible cable or cord of this lamp cannot be
replaced. If the cord is damaged, the lamp shall be destroyed. - This portable lamp has a polarized plug (one blade is wider
than the other) as a safety feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug, if it
still does not fit, contact a qualified electrician. Never use with
an extension cord unless the plug can be fully inserted. Do not
attempt to disregard this safety feature. - Before beginning assembly of the product, make sure all parts
are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to
assemble the product. Estimated Assembly Time: 6 minutes. - Use ON/OFF Type A bulb MAX 40-WATT or CFL bulb MAX 13-WATT or
LED bulb MAX 9-WATT. There is an LED 4-WATT bulb in the box. - Make sure all parts could be aligned before assembling. Do not
rotate lamp body too hard to avoid base screw broken. Screw the
Lamp body (B) onto the Lamp base(A). Screw the Lamp body (C) onto
the Lamp body (B). Screw the Lamp body (C1) onto the Lamp body (C).
Screw the Lamp body (D) onto the Lamp body (C1). Be careful not to
twist the power cord and tighten securely. - Insert the bulb(G1) into the socket(E1). Then screw the Glass
shade(F1)onto the socket(E1). Insert the bulb(G2) into the
socket(E2). Then screw the Glass shade(F2)onto the socket(E2).
Insert the bulb(G3) into the socket(E3). Then screw the Glass
shade(F3)onto the socket(E3). - Put the light on a level surface to check if everything is
stable.
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
Lamp base
1X
E
Lamp body
3X
B
Lamp body
1X
F
Socket
3X
C
Lamp body
2X
G
Shade
3X
D
Lamp body
1X
Model# JYL3087 Product Dimensions: 20″L X 11W X 66″H
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT THERE IS LED 4-WATT BULB IN THE BOX
Step 1 Make sure all parts could be aligned before assemble Do not rotate lamp body too hard avoid base screw broken Screw the Lamp body (B) onto the Lamp base(A) Screw the Lamp body (C) onto the Lamp body (B) Screw the Lamp body (C1) onto the Lamp body (C) Screw the Lamp body (D) onto the Lamp body (C1) Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
Step 2 Insert the bulb(G1) into the socket(E1). Then screw the Glass shade(F1)onto the socket(E1). Insert the bulb(G2) into the socket(E2). Then screw the Glass shade(F2)onto the socket(E2). Insert the bulb(G3) into the socket(E3). Then screw the Glass shade(F3)onto the
socket(E3).
Step 3 Put the light on a level surface to check if everything is stable.
