JYL8504 Floor Lamp
Product Information:
The JYL8504 is a portable lamp that comes with a polarized plug
for safety. It has a lamp base (A), sheet iron (B), and lamp body
(C) with three different pieces. It also has a lamp body 1 (D),
lamp body 2 (E), and lamp body (bend) (F). The lamp comes with a
gasket (G), two screws (H and I), big spanner (J), socket (K),
shade (L), out ring (M), bulb (N), two nuts (O and P), and a small
spanner (Q). The product dimensions are 41*15*60-70. The lamp can
be used with an on/off type A bulb max 100-watt, CFL bulb max
23-watt, or LED bulb max 12-watt. There is also an LED 9.5-watt
smart bulb included in the box.
Product Usage Instructions:
- Before assembling the product, make sure all parts are present
and undamaged. - Unpack all the parts carefully and align them before
assembling. - Insert Lamp Body(D) into Lamp Body(C) and then insert Lamp
Body(C) into Lamp Base(A) through Sheet Iron(B), Gasket(G), and
Screw(H). Then fix the Screw(I) on the bottom of Base(A) using Big
Spanner(J). - Insert Lamp Body(bend)(F) into Lamp Body(E) and fix the Nut(O)
on it using Small Spanner(P). - Put the Shade(L) on the Socket(K) and tighten the Out Ring(M)
on it. Insert the Bulb(N) into the Socket(K). - Before adjusting the lamp height, unscrew the Knob(Q). Adjust
the lamp height and then screw the Knob(Q) tight. - Put the light on a level surface to check if everything is
stable. - For care and maintenance, unplug the lamp before cleaning. Dust
the shades with a feather duster or an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean the lamp bases
with methods appropriate for the material. Avoid using chemicals
and household cleaners as they may damage the finish.
CARE AND MAINTENANCE Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
Lamp base
1X
J
Big spanner
1X
B
Sheet iron
1X
K
Socket
1X
C
Lamp body
3X
L
Shade
1X
D Lamp body 1
1X
M
Out Ring
1X
E
Lamp body 2
2X
N
Bulb
1X
F
Lamp Body(bend)
G
Gasket
1X
O
Nut
2X
1X
P Small spammer
1X
H
Screw
1X
Q
Knob
1X
I
Screw
1X
Model# JYL8504 Product Dimensions: 41*15*60-70″
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 15 minutes. PLEASE USE ON/OFF TYPE”A” BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT THERE IS LED 9.5-WATT SMART BULB IN THE BOX
Step 1 Make sure all parts could be aligned before assemble Unpack all parts from cartons carefully. Insert the Lamp Body(D) into the Lamp Body (C ), Insert the Lamp Body(C) into the Lamp Base (A) through the sheet iron(B),Gasket(G) and Screw(H), Fix the screw(I)on bottom of base(A)by using Big spanner(J). Insert the Lamp Body(bend)(F) into the Lamp Body (E ), then fix the nut(O) on it by using Small Spanner(P).
Step 2 Put the shade(L) on the socket(K),then tighten the out ring(M) on it. Insert the bulb(N) into the socket(K). Please unscrew the knob (Q) first before adjust the lamp height, and screw the knob(Q) to tight after lamp height adjust finished
Put the light on a level surface to check if everything is stable.
ENJOY YOUR LAMP
