ES2805 Bluetooth Low Energy or ANT Module
Product Information:
Product Name: ES2805
Manufacturer: KAGA FEI Co., Ltd.
FCC ID: 2A6NFES2805
IC: 28568-ES2805
Date of Manual: 17-Apr.2023
Version: Ver.0.1
Product Usage Instructions:
- This module should be installed in the host device according to
the interface specification. - Canada Regulatory Information:
- The host device of this module must indicate the following:
- This device complies with Innovation, Science and Economic
Development Canada’s applicable licence-exempt RSSs. - Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including
interference that may cause undesired operation of the device.
- This device complies with Innovation, Science and Economic
- This product is certified as a type of portable device with
Science and Economic Development Canada Rules. To maintain
compliance with RF Exposure requirement, please use within the
specification of this product.
- The host device of this module must indicate the following:
- FCC Regulatory Information:
- This device complies with part 15 of the FCC Rules (Part 15
Subpart C). - The following conditions apply to the host device or user
manual:- This device may not cause harmful interference.
- This device must accept any interference received, including
interference that may cause undesired operation.
- Please notify certified ID by either one of the following
methods on your product:- Contains Transmitter Module FCC ID: 2A6NFES2805
- Contains FCC ID: 2A6NFES2805
- If the FCC ID is not visible when the module is installed
inside another device, then the module must also display a label
referring to the enclosed module. - CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the use’s authority to
operate the equipment. This statement should be indicated in the
user manual of the host device. - The modular transmitter is only FCC authorized for specific
rule parts (Part 15 Subpart C) listed on the grant. The host
product manufacturer is responsible for compliance with any other
FCC rules that apply to the host not covered by the modular
transmitter grant of certification. The final host product still
requires Part 15 Subpart B compliance testing with the modular
transmitter installed. - This product is certified as a type of portable device with FCC
Rules. To maintain compliance with RF Exposure requirement, please
use within the specification of this product. - The antenna used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This statement should be indicated in the user manual of the host
device. - This module can change the output power depending on the
circumstances by the application software developed by the module
installer. The end user cannot change the output power. - Antenna List:
- No.1: Antenna Category – Monopole
- This device complies with part 15 of the FCC Rules (Part 15
ES2805
17-Apr.2023 Ver.0.1 KAGA FEI Co., Ltd.
User manual
(for ES2805)
FCC ID: 2A6NFES2805 IC: 28568-ES2805
KAGA FEI Co., Ltd.
1/4
ES2805
17-Apr.2023 Ver.0.1 KAGA FEI Co., Ltd.
This module should be installed in the host device according to the interface specification.
1) Japan Regulatory Information a) This Product is a radio system and obtained certification of construction type combined with the specific antenna. b) Please ensure that your product has a label with the following certification mark at easily viewable location. If your product is too small to have the label, please place it in the instruction manual and package of your product. The mark diameter shall be easily legible. In case your product does not have the label with the following certification mark, you or your customer who uses your product may be against the Radio Law and subjected to criminal punishment. KAGA FEI shall not be liable for any loss or damage incurred by you or your customer arising from use of your product which does not have following certification mark. This product installs a radio system which has been approved as a radio station in a low power data communication system based on the Radio Law. ES2805 : 005-103150
2) Canada Regulatory Information The following information must be indicated on the host device of this module; a) This device complies with Innovation, Science and Economic Development Canada’s applicable licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’ Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
b) This product is certified as type of the portable device with Science and Economic Development Canada Rules. To maintain compliance with RF Exposure requirement, please use within specification of this product.
Ce produit est certifié comme type de l’appareil portable avec Règles de Innovation, Sciences et Développement économique Canada. Pour maintenir l’acquiescement avec exigence Exposition de RF, veuillez utiliser dans spécification de ce produit. – IC: 28568-ES2805
c) Please notify certified ID by either one of the following method on your product. -Contains IC : 28568-ES2805 Specifiez ID certifiée dans votre produit par une de méthode suivante. -Contains IC : 28568-ES2805
KAGA FEI Co., Ltd.
2/4
ES2805
17-Apr.2023 Ver.0.1 KAGA FEI Co., Ltd.
3) FCC Regulatory Information
a) This device complies with part 15 of the FCC Rules.
-Part 15 Subpart C
b) The following statement shall be indicated on the host device or the user manual of the
host device; Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
c) Please notify certified ID by either one of the following method on your product.
-Contains Transmitter Module FCC ID: 2A6NFES2805
-Contains FCC ID: 2A6NFES2805
d) Since there is no space which indicates FCC ID on this module, FCC ID is indicated in
a manual. If the FCC ID is not visible when the module is installed inside another
device, then the module is installed must also display a label referring to the enclosed
module.
e) The following statement shall be indicated in the user manual of the host device;
CAUTION: Changes or modifications not expressly approved by the party responsible
for compliance could void the use’s authority to operate the equipment.
f) The modular transmitter is only FCC authorized for the specific rule parts (Part 15
Subpart C) listed on the grant, and the host product manufacturer is responsible for
compliance to any other FCC rules that apply to the host not covered by the modular
transmitter grant of certification. The final host product still requires Part 15 Subpart B
compliance testing with the modular transmitter installed.
g) This product is certified as type of the portable device with FCC Rules. To maintain
compliance with RF Exposure requirement, please use within specification of this
product.
h) The following statement shall be indicated in the user manual of the host device; The
antenna used for this transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
i) This module can change the output power depending on the circumstances by the
application software which is developed by module installer. Any end user cannot
change the output power.
j) Antenna List
No.1
Antenna Category Monopole
Antenna Type
PCB antenna
Dimensions
3.45mm x 2.85mm
4) CE Regulatory Information a) When your end product installs this module, it is required to proceed additional certification processes before placing on the market in EU member states to make your products fully comply with relative EU standards. b) KAGA FEI can provide you the test reports of conducted measurement portion for the radio module. You can utilize the test reports for the certification processes of your end product as it requires radio testing.
KAGA FEI Co., Ltd.
3/4
ES2805
17-Apr.2023 Ver.0.1 KAGA FEI Co., Ltd.
Control No.
Control name (1/1) Pin Layout
Pin Descriptions
Pin Pin name Pin function
1
GND
Ground
2
NC
Not Connected
3
P0.12
Digital I/O
P0.00
Digital I/O
4
XL1
Analog input
P0.01
Digital I/O
5
XL2
Analog input
6
DCC
Power
7
DEC4
Power
8
VDD
9
NC
10
NC
Power Not Connected Not Connected
11
OUT_ANT Antenna In/Out
12
OUT_MOD RF In/Out
13 14 15 16 17 18
19
20
21
22
23
24 25 26 27-28
GND NC P0.18 SWDCLK SWDIO GND P0.21 RESET P0.20 P0.05 AIN3 NC P0.04 AIN2 P0.14 P0.16 GND NC
Ground Not Connected Digital I/O Digital input Digital I/O Ground
Digital I/O
Digital I/O Digital I/O Analog input Not Connected Digital I/O Analog input Digital I/O Digital I/O Ground Not Connected
Description Ground (0 V) Reserve General purpose I/O General purpose I/O Connection for 32.768kHz crystal (LFXO) General purpose I/O Connection for 32.768kHz crystal (LFXO) DC/DC converter output (3.3V PWM) 1.3V analog supply. Input from DC/DC converter. Output from 1.3 V LDO. Power (battery) supply Reserve Reserve Internal antenna. It should be connected to Pin 12 OUT_MOD for normal operation RF I/O pin. It should be connected to Pin 11 OUT_ANT for normal operation Ground (0 V) Reserve General purpose I/O Serial Wire Debug clock input for debug and programming Serial Wire Debug I/O for debug and programming Ground (0 V) General purpose I/O Configurable as pin reset General purpose I/O General purpose I/O SAADC input Reserve General purpose I/O pin. SAADC/COMP/LPCOMP input. General purpose I/O pin. General purpose I/O pin. Ground pin. (0 V) Isolated pad on PCB for mechanical stability.
KAGA FEI Co., Ltd.
4/4
