Utilitech 423953 Spade Terminals Instruction Manual

423953 Spade Terminals

Product Information

  • Product Name: Spade Terminals
  • Model Number: #423953
  • Package Quantity: 20 units
  • Gauge: 22-16
  • Wire Connector Model Number: #TSP-R6 26198
  • Wire Connector Certification: E245479

This product is a set of spade terminals used for connecting
wires. It is designed to securely fasten and provide electrical
conductivity between the wire and the terminal. The terminals are
made to accommodate wires with a gauge of 22-16.

It is important to note that this product should be handled with
caution due to potential electrical hazards and exposure to
chemicals. Please read and follow the instructions carefully to
ensure safe usage.

Product Usage Instructions

  1. Strip the insulation of the wire by approximately 1/4 inch
    (6mm).
  2. Insert the stripped end of the wire into the spade
    terminal.
  3. Use a crimping tool, specifically the IZUMI #3D, to firmly
    crimp the terminal onto the wire.
  4. Ensure that the connection is secure and provides proper
    electrical conductivity.

Warning: Before using this product, make sure
to shut off the power to the circuit. Failure to do so can result
in electrical fires, personal injury, or even death. It is also
recommended to consult local building codes to determine specific
installation requirements for using this product.

Warning: This product contains chemicals,
including DEHP, which are known to the State of California to cause
cancer and birth defects or other reproductive harm. For more
information, please visit www.P65Warnings.ca.gov.

Distributed by: Lowe’s Home Centers LLC, 1000
Lowe’s Blvd., Mooresville, NC 28117. For any inquiries or
assistance, please call 866-994-4148.

Manufactured in: China

Spade Terminals
Terminales de pala

#423953
20 CT
20 UNIDADES
22-16
GAUGE CALIBRE
#6
Stud Size Tamaño del pasador

INSTALLATION INSTRUCTIONS: INSTRUCCIONES DE INSTALACIÓN:

1. Strip wire’s insulation 1/4 inch. 1. Pele 6 mm del aislamiento del

2. Insert stripped wire into

cable.

terminal.

2. Inserte el cable pelado en el

3. Crimp tightly using crimping

terminal.

tool IZUMI #3D.

3. Sujete firmemente con la

· Stranded copper wire only, 600V max., building wire; 1000V max., signs and fixtures, 167°F max.

herramienta de engarzado IZUMI #3D.
· Solo cable de cobre trenzado, 600 V máx., cable de construcción; 1000 V máx.,

WARNING: Contact with electricity can cause electrical fires, personal injury or death. Shut off power to the circuit before using this product. Consult local building codes to determine installation requirements.

letreros y accesorios, 75 °C máx. ADVERTENCIA: el contacto con electricidad puede causar incendios eléctricos, lesiones personales o la muerte. Corte la alimentación al circuito antes de usar este producto. Consulte los códigos de construcción locales para determinar los

requerimientos de instalación.

WARNING: This product can expose you to

chemicals including DEHP, which are known to

the State of California to cause cancer and birth

defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

ADVERTENCIA: este producto puede exponerlo a sustancias químicas, que incluyen DEHP, reconocidas por el estado de California como causantes de cáncer y defectos congénitos u otros daños en el aparato reproductivo. Para obtener más información, visite www.P65Warnings.ca.gov.

Item / Artículo #423953

Distributed by / Distribuido por: Lowe’s Home Centers LLC, 1000 Lowe’s Blvd., Mooresville, NC 28117 866-994-4148 MADE IN CHINA HECHO EN CHINA

Model / Modelo #TSP-R6 26198

WIRE CONNECTOR CONECTOR DE CABLE
5TH6 E245479

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals