Monstertech Collective Mount Universal Instruction Manual (+ PDF)

Contents hide

1 MONSTERTECH Collective Mount Universal Instruction Manual

2 COLLECTIVE MOUNT UNIVERSAL

2.1 Instruction Manual

3 GENERAL ASSEMBLY INFOS

3.1 PROFILE NUT

3.2 HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED

4 UNIVERSAL CONNECTOR

5 BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]

6 PARTS

7 ASSEMBLY WITHOUT ARMREST

8 ASSEMBLY WITH ARMREST

9 ASSEMBLY ON EXISTING CHAIR MOUNT

10 WARNING NOTICES

11 MTSIM.

13 Documents / Resources

13.1 References

14 Related Posts

MONSTERTECH Collective Mount Universal Instruction Manual

COLLECTIVE MOUNT UNIVERSAL

Instruction Manual

GENERAL ASSEMBLY INFOS

PROFILE NUT

HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED

UNIVERSAL CONNECTOR

BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]

PARTS

ASSEMBLY WITHOUT ARMREST

ASSEMBLY WITH ARMREST

ASSEMBLY ON EXISTING CHAIR MOUNT

WARNING NOTICES

CAUTION! Do not clamp your fingers while attaching the universal collective mount.
CAUTION! Check before usage if all screws are tightened.
DANGER: Contains small parts not suitable for children under 3 years.
Only suitable for children over 12 years and adults.
All MTSIM products are hand assembled and quality checked.
The mount is designed for usage only with a computer controller (e.g. joystick or throttle).
We exclude liability if the product is used for purposes other than intended.
MTSIM shall be liable for damage arising from causes other than the detriment to life, body and health only to the extent that such damage arises from wilful misconduct, gross negligence or the culpable violation of a fundamental contractual obligation on the part of MTSIM or a vicarious agent (e.g. the delivery service) of

MTSIM.

Any further liability for damages shall be excluded. If you have safety concerns or questions regarding assembly, contact us under [email protected] or visit www.mtsim.com/en/