02320002 Table Mount Instrument Carrier
Product Information:
The Table Mount Instrument Carrier is a versatile and adjustable
mounting solution designed for use with a computer controller such
as a joystick or throttle. It is hand-assembled and quality checked
to ensure optimal performance.
Assembly Example:
The product comes with a variety of parts including profile
nuts, hex key set with ball head, universal connectors, slot nuts,
bolts, profile caps, and screws. The assembly process involves
attaching the different parts together to create a secure
instrument carrier.
Parts List:
- 1x Profile Nut
- Hex Key Set with Ball Head + Extension or Similar
(required) - Universal Connector
- Slot Nut M8
- Bolt Dimensions (M8x35, M8x25)
- Profile Cap
- Various Bolts and Screws (M5x12, M5x12 flat head black)
Product Usage Instructions:
- Start by assembling the profile nut using the provided hex key
set or a similar tool. - Attach the universal connector to the profile nut.
- Secure the slot nut M8 in place using the appropriate bolts and
screws. - Assemble the profile cap onto the instrument carrier.
- Attach the desired instruments to the instrument carrier using
the provided screws and bolts. - Adjust the position of the instrument carrier as desired.
- Tighten all hexagon head screws using an open-end wrench.
Important Safety Precautions:
- Do not clamp your fingers while attaching the instrument
carrier. - Before usage, check that all screws are tightened
securely. - After making adjustments, ensure that the instrument carrier is
screwed on tight. - Keep small parts away from children under 3 years old. Suitable
for children over 12 years and adults.
Liability and Warranty:
MTSIM shall be liable for damage arising from wilful misconduct,
gross negligence, or the culpable violation of a fundamental
contractual obligation. Further liability for damages is excluded.
For safety concerns or questions regarding assembly, contact MTSIM
at [email protected] or visit www.mtsim.com/en/.
Assembly example
TABLE MOUNT INSTRUMENT CARRIER
Instruction Manual Bedienungsanleitung
Mode d`emploi
GENERAL ASSEMBLY INFO AND HOW TO
PROFILE NUT
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
MTSIM TABLE MOUNT INSTRUMENT CARRIER MANUAL
2
UNIVERSAL CONNECTOR
M8x30 Ø8mm
Slot nut M8
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
35
M8x35
25
M8x25
8 8
MTSIM TABLE MOUNT INSTRUMENT CARRIER MANUAL
3
PROFILE CAP ASSEMBLY
MTSIM TABLE MOUNT INSTRUMENT CARRIER MANUAL
4
PARTS
1x
1x
4 0
80
120
1x
40
80
1x
80
4 0
5
Ø8
2x 2x M5
4x
12
black
2x
25
2x
8,4 16
MTSIM TABLE MOUNT INSTRUMENT CARRIER MANUAL
5
ASSEMBLY
cap
threads
turn over
M8x25 hexagon head
screw
2x washer Ø16
loose fit
MTSIM TABLE MOUNT INSTRUMENT CARRIER MANUAL
6
double slot nut 2xM5
MTSIM TABLE MOUNT INSTRUMENT CARRIER MANUAL
7
M5x12 flat head black
M5x12 flat head black
MTSIM TABLE MOUNT INSTRUMENT CARRIER MANUAL
8
turn to desired position
Tighten the hexagon head screws with an open-end
wrench.
MTSIM TABLE MOUNT INSTRUMENT CARRIER MANUAL
9
For instructions on how to attach various instruments, see these guides: MFD / Tablet Mount Center Instruction Manual MFD / Tablet Mount Side L/R Instruction Manual WINWING Panel Mount Instruction Manual
12-12-2022
WARNING NOTICES
CAUTION! Do not clamp your fingers while attaching the instrument carrier. CAUTION! Check before usage if all screws are tightened. CAUTION! Check before usage that the instrument carrier is screwed on tight after making adjustments.
DANGER: Contains small parts not suitable for children under 3 years. Only suitable for children over 12 years and adults.
All MTSIM products are hand assembled and quality checked. The mount is designed for usage only with a computer controller (e.g. joystick or throttle). We exclude liability if the product is used for purposes other than intended.
MTSIM shall be liable for damage arising from causes other than the detriment to life, body and health only to the extent that such damage arises from wilful misconduct, gross negligence or the culpable violation of a fundamental contractual obligation on the part of MTSIM or a vicarious agent (e.g. the delivery service) of MTSIM. Any further liability for damages shall be excluded.
If you have safety concerns or questions regarding assembly, contact us under [email protected] or visit www.mtsim.com/en/
WARNHINWEISE
VORSICHT! Klemmgefahr bei der Montage des Instrument Carriers. VORSICHT! Achten Sie darauf, dass vor Benutzung alle Schrauben immer fest angezogen sind. VORSICHT! Achten Sie darauf, dass der Instrument Carrier nach dem Positionieren fest angezogen ist.
GEFAHR: Nicht für Kinder unter 3 Jahren, Kleinteile – Verschluckungsgefahr! Nur für Kinder ab 12 Jahren und Erwachsene
Alle Produkte der Firma MTSIM sind handgefertigt und qualitätsgeprüft. Die Halterung ist nur zur Verwendung in Kombination mit einem PC Controller (z.B. Joystick oder Schubreglers) ausgelegt. Wir übernehmen keine Haftung für zweckentfremdete Benutzung.
Für andere als durch Verletzung von Leben, Körper und Gesundheit entstehende Schäden haftet die MTSIM lediglich, soweit diese auf vorsätzlichem oder grob fahrlässigem Handeln oder auf schuldhafter Verletzung einer wesentlichen Vertragspflicht durch MTSIM oder eines Erfüllungsgehilfen (z. B. dem Zustelldienst) der MTSIM beruhen. Eine darüber hinausgehende Haftung auf Schadensersatz ist ausgeschlossen.
Bei Fragen zur Sicherheit oder Aufbau unserer Produkte, wenden Sie sich an [email protected] oder besuchen unsere Website unter www.mtsim.com
NOTICES D`AVERTISSEMENT
ATTENTION! Risque de coincement lors du montage de la fixation du porte-instruments. ATTENTION! Vérifiez que toutes les vises sont correctement serrées avant utilisation. ATTENTION! Vérifier avant utilisation que le support collectif est bien vissé après avoir effectué les réglages.
DANGER: Contient des petites pièces susceptibles d`être avalées. Ne convient pas aux enfants de moins de 3 ans. Utilisation appropriée pour enfants à partir de 12 ans et adultes.
Tous les produits MTSIM sont fait main et on passés les contrôles de qualité. La fixation est conçue uniquement pour une utilisation avec un joystick ou une manette des gaz. Nous dégageons toute responsabilité pour toute utilisation autre que celle prévue.
Pour les dommages engendrés autres que l’atteinte corporelle, à la vie et à la santé, MTSIM n’est responsable que dans la mesure où ces dommages reposent sur un acte intentionnel, une faute lourde ou la violation fautive d’une obligation contractuelle essentielle par MTSIM ou par des agents délégués par MTSIM. Une responsabilité allant au-delà en dommages et intérêts est exclue.
Si vous avez des questions concernant la sécurité ou l`assemblage, contactez-nous a [email protected] ou visitez www.mtsim.com/fr/
MTSIM – MONSTERTECH – Simulation Design – Offizielle Webseite
