525318 MTS Table Mount for Winwing MIP
MTS WINWING MIP – Product Information
The MTS WINWING MIP is a product that provides a comprehensive
solution for flight simulation enthusiasts. It is designed to
enhance the overall flight experience by providing a realistic
cockpit setup. The product comes with various parts and components
that are pre-assembled for ease of use.
The MTS WINWING MIP includes the following parts:
- Pre-assembled universal connectors
- Slot nuts in different sizes (M5 and M8)
- Flat head black connectors in different sizes (M8x16, M5x22,
M5x40) - Star knobs (M6x25)
- Washers
- Bearings
- Curved spring washers
- Rollers
- Flat head cap screws (M4x20)
- Extremely flat head black screws (M8x30)
MTS WINWING MIP – Product Usage Instructions
Assembly:
- Ensure you have a flat surface for assembly.
- Start by assembling the front frame using the pre-assembled
universal connectors, slot nuts, and flat head black
connectors. - Adjust the height by loosening the red marked bolts on each
side. - Loosen the star knobs on both sides to angle the MIP.
- Move the MIP evenly by grabbing it on both sides.
Operation:
- To adjust the inclination of the profile, loosen the screw
marked in red. - To adjust the height, loosen the red marked bolts on each
side. - To angle the MIP, loosen the red marked screws on both
sides.
Please note that these instructions are a general guide. For
more detailed instructions and safety precautions, please refer to
the Winwing operating instructions included with the product.
MTS WINWING MIP
Instruction Manual Bedienungsanleitung
Mode d`emploi
PARTS
1x
80 80 80 80 80
80 80
555
40
2x
530
1x
525318
1x
170 40
3x
120 40
threads
40
threads on both sides
40
1x
100 40
1x
50 40
MTSIM MTS WINWING MIP INSTRUCTION MANUAL
2
1x
1x
2x
4 0
40
80
2x
80
14x
Ø 8
8
30
4x
30
black
8
8
4x
20
24x
16
black black
5 4 0
9x
80
14x
20x
22
30x
M8
18x
M5
4x black
8,4 16
20x
5,3 10
MTSIM MTS WINWING MIP INSTRUCTION MANUAL
3
PRE-ASSEMBLED
with this parts: 2x
2 5
12,8
4
4x
Ø32
Ø6
4x
15 4,1
8x
6,4 12
4x
M6
4x
10,8
6,5
4x
20
MTSIM MTS WINWING MIP INSTRUCTION MANUAL
4
ASSEMBLY
4x pre-assembled
universal connector
51283mmmm
4x pre-assembled
universal connector
~105 mm
middle
~105 mm
120 mm
170 mm
MTSIM MTS WINWING MIP INSTRUCTION MANUAL
5
50
2x pre-assembled
universal connector
12x slot nut
M5
2x slot nut
M8
MTSIM MTS WINWING MIP INSTRUCTION MANUAL
6
100 mm
4x slot nut
M5
2x slot nut
M8
6x cap
MTSIM MTS WINWING MIP INSTRUCTION MANUAL
7
2x M8x16 flat head black
connector
2x M8x16 flat head black
connector
MTSIM MTS WINWING MIP INSTRUCTION MANUAL
8
3x
Also observe the Winwing operating instructions!
4x washer Ø10
4x M5x22
1x
6x washer Ø10
6x M5x22
MTSIM MTS WINWING MIP INSTRUCTION MANUAL
9
4x M5x40 Winwing original part
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 10
8x M5x40 Winwing original
part
The inclination of the profile can be adjusted by loosening the screw marked in red. MTSIM MTS WINWING MIP INSTRUCTION MANUAL 11
4x M5x40 Winwing original
part
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 12
USUALLY PRE-ASSEMBLED
2x
2x star knob
M6x25
4x washer
Ø12
2x slot nut
M6
2x bearing
2x curved spring washer 2x roller 2x M4x20 flat head
cap screwable
M8x30 extrem flat head black
washers Ø16 black
Has to be done on both sides of the assembly.
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 13
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 14
ASSEMBLY OF THE FRONT FRAME
Use a plan surface for assembly.
threads
555 mm
4x pre-assembled universal connector
530 mm
threads
caps
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 15
for both sides
4x slot nut
M8
4x slot nut
M8
4x M8x16 flat head black
min. 80 mm
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 16
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 17
on the other
side too
on the other side too
4x slot nut M8
4x M8x16 flat head
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 18
roll into the upper slots Detail view
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 19
OPERATION
Loosen the red marked bolts on each side to adjust the height.
4x M8x16 flat head black
2x screwable cap
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 20
Loosen the star knobs
on both sides.
Grab on both sides
and move evenly!
Loosen the red marked screws on both sides to angle the MIP.
MTSIM MTS WINWING MIP INSTRUCTION MANUAL 21
16-03-2023
