Sistema Silent12 Moving Silent12 Beam Light User Manual

SILENT12 Moving SILENT12 Beam Light

SILENT12 User Manual

1.1 Unpacking

The following items are included in the box:

• One SILENT12 fixture
• User manual

1.2 Safety Instructions

Warning!!! To reduce the risk of fire, electric shock, or injury
to persons, follow these important safety instructions:

• This product is suitable for indoor use only.
• Always turn off, unplug power and allow fixture to cool before
  servicing.
• Ensure that fixture is properly grounded.
• Please keep this User Guide for future consultation.
• Always make sure that you are connecting to the proper voltage
  and that the line voltage you are connecting to is not higher than
  that stated on decal or rear panel of the fixture.
• Always disconnect from power before servicing or replacing
  fuse.
• Make sure power cord is never crimped or damaged.
• Do not look into the beam from a distance of less than 40 cm
  (16 inches).
• Do not stare into the beam for extended periods at a short
  distance.

Caution! Avoid looking directly into the LED light beam at a
close distance!

1.3 Features

• Flicker-free operation
• Smooth color mixing by RGBWA 5in1 LEDs
• 5 working modes: DMX, Auto, Sound, Manual, Master/Slave
• DMX channels: 9/6 ch.
• Linear dimmer 0-100%
• Strobe 1-25 flash per second
• 4-button LED display
• IP65 for indoor and outdoor use only

1.4 Product Overview

The SILENT12 fixture has the following ports:

• DMX IN
• DMX OUT
• POWER IN
• POWER OUT

2. SETUP

2.1 Mounting

This controller can be mounted in any SAFE position provided
there is enough room for ventilation.

IMPORTANT!!! Safety cables must always be used. The safety cable
must be capable of holding 10 times the weight of the fixture.

2.2 Fixture Linking

To run your light shows of one or more fixtures using a DMX-512
controller or to run synchronized shows on two or more fixtures in
master/slave operating mode, you need DMX cables to link the units
from DMX IN to DMX OUT.

3. OPERATION INSTRUCTIONS

3.1 Control Panel

The control panel has the following buttons:

• MENU: To scroll over the main menu
• UP: To increase the value.
• DOWN: To decrease the value.
• ENTER: To confirm setting

The control panel has the following functions:

3.3 DMX Mode

The SILENT12 fixture has 9 DMX channels with the following
functions:

Product Usage Instructions

Follow the below instructions to use the SILENT12 product:

1. Unpack the product and ensure all items are present.
2. Mount the controller in a safe position with enough room for
   ventilation. Use safety cables capable of holding 10 times the
   weight of the fixture.
3. Link one or more fixtures using a DMX-512 controller or run
   synchronized shows on two or more fixtures in master/slave
   operating mode using DMX cables to link the units from DMX IN to
   DMX OUT.
4. Connect the fixture to a switched circuit with a suitable Earth
   Ground and AC power of 100V – 240V 50-60Hz.
5. Turn on the fixture and use the control panel buttons to select
   one of the following modes: DMX, Auto, Sound, Manual, or
   Master/Slave.
6. In DMX mode, use the control panel buttons to set the DMX
   channel mode and address (001-512) and adjust the Master dimmer,
   Red, Green, Blue, White, Amber intensity, and Strobe settings as
   desired.
7. In Manual mode, use the control panel buttons to manually
   control the Red, Green, Blue, White, and Amber intensity.
8. In Auto mode, the fixture will automatically change colors,
   cross fade, pulse, or change to sound.
9. In Sound mode, the fixture will change colors to sound.
10. In Master/Slave mode, the fixture will run synchronized shows
    with other fixtures.

SILENT12
User manual
1.1 Unpacking The following items are included in the box:
µ 1 x Silent12 µ 1 x Power cable µ 1 x Mounting bracket µ 1 x User Manual
µ
1.2 Safety Instructions
Warning!!! To reduce the risk of fire, electric shock, or injury to persons,
! follow these important safety instructions:
This product is suitable for indoor use only. Always turn off, unplug power and allow fixture to cool before servicing. Ensure that fixture is properly grounded. Please keep this User Guide for future consultation. Always make sure that you are connecting to the proper voltage and that the
line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture. Always disconnect from power before servicing or replacing fuse. Make sure power cord is never crimped or damaged. Do not look into the beam from a distance of less than 40 cm (16 inches). Do not stare into the beam for extended periods at a short distance.
Caution! Avaid looking directly into the LED light beam at a close distance!
1

1.3 Features
Flicker free operation Smooth color mixing by RGBWA 5in1 LEDs 5 working modes: DMX, Auto, Sound, Manual, Master/Slave DMX channels: 9/6 ch. Linear dimmer 0-100% Strobe 1-25 flash per second 4-button LED display IP65 for indoor and outdoor use only
1.4 Product overview

DMX IN DMX OUT

POWER IN POWER OUT

2. SETUP

DISPLAY

2.1 Mounting This controller can be mounted in any SAFE position provided there is enough room for ventilation.
IMPORTANT!!! Safety cables must always be used. The safety cable must be capable of holding 10 times the weight of the fixture.

2.2 Fixture Linking
To run your light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures in master/slave operating mode, you need DMX cables to link the units from DMX IN to DMX OUT.

DMX CONTROLLER

DMX In DMX Out

DMX In DMX Out

2

2.3 AC Power The fixture is designed to work on AC 100V – 240V 50-60Hz. All units must be powered directly from a switched circuit.
Warning!!! All fixtures must be connected to circuits with a suitable Earth Ground.
3. OPERATION INSTRUCTIONS

3.1 Control Panel

MENU UP DOWN ENTER

MENU: To scroll over main menu UP: To increase the value. DOWN: To decrease the value. ENTER: To confirm setting

Menu A001-512 d001-512 CC00-99 CP00-99 dE00-99 dEdF -on- / -oFF r000-255 G000-255 b000-255 o000-255 Y000-255

Function 9 DMX channel mode, set address 001-512 6 DMX channel mode, set address 001-512 Color step changing from slow to fast Color cross fade from slow to fast Color pulse changing from slow to fast Color changing to sound Set display backlight on/off Manual control of Red Manual control of Green Manual control of Blue Manual control of White Manual control of Amber

3

3.3 DMX Mode

9 DMX Channels

Channel DMX valude

1

0 – 255

2

0 – 255

3

0 – 255

4

0 – 255

5

0 – 255

6

0 – 255

0 – 10

7

11 – 250

251 – 255

0 – 10

11 – 60

8

61 – 110

111 – 160

161 – 210

211 – 255

9

0 – 255

Functions Master dimmer 0 – 100% Red Intensity 0 – 100% Green Intensity 0 – 100% Blue Intensity 0 – 100% White Intensity 0 – 100% Amber Intensity 0 – 100% No function Strobe from slow to fast Strobe to sound No function Stactic color selection by ch9 Color cross fade, speed from slow to fast by ch9 Color pulse changing, speed from slow to fast by ch9 Color step changing, speed from slow to fast by ch9 Sound activation Static color selection or Macro speed from slow to fast

6 DMX Channels

Channel DMX valude

1

0 – 255

2

0 – 255

3

0 – 255

4

0 – 255

5

0 – 255

0 – 10

6

11 – 250

251 – 255

Functions Red Intensity 0 – 100% Green Intensity 0 – 100% Blue Intensity 0 – 100% White Intensity 0 – 100% Amber Intensity 0 – 100% No function Strobe from slow to fast Strobe to sound

4. Specifications
Light source: 12 x 10W RGBWA 5-in-1 LEDs Optical lens: 40° Power input: AC 100-240V 50-60Hz Size: 235*120*275 mm Weight: 5 kg

4