SILENT18 Beam Light
SILENT18 User Manual
1.2 Safety Instructions
Warning!!! To reduce the risk of fire, electric shock, or injury
to persons, follow these important safety instructions:
- This product is suitable for indoor and outdoor use.
- Always turn off, unplug power and allow fixture to cool before
servicing. - Ensure that fixture is properly grounded.
- Please keep this User Guide for future consultation.
- Always make sure that you are connecting to the proper voltage
and that the line voltage you are connecting to is not higher than
that stated on decal or rear panel of the fixture. - Always disconnect from power before servicing or replacing
fuse. - Make sure power cord is never crimped or damaged.
- Do not look into the beam from a distance of less than 40 cm
(16 inches). - Do not stare into the beam for extended periods at a short
distance.
Caution! Avoid looking directly into the LED light beam at a
close distance!
1.3 Features
- Flicker free operation
- Smooth color mixing by RGBWA 5in1 LEDs
- 5 working modes: DMX, Auto, Sound, Manual, Master/Slave
- DMX channels: 9/6 ch.
- Linear dimmer 0-100%
- Strobe 1-25 flash per second
- 4-button LED display
- Seetronic power & signal connector
1.4 Product overview
DMX IN POWER IN
DMX OUT POWER OUT
2. Setup
2.1 Mounting
This controller can be mounted in any safe position provided
there is enough room for ventilation.
IMPORTANT!!! Safety cables must always be used. The safety cable
must be capable of holding 10 times the weight of the fixture.
2.2 Fixture Linking
To run your light shows of one or more fixtures using a DMX-512
controller or to run synchronized shows on two or more fixtures in
master/slave operating mode, you need DMX cables to link the units
from DMX IN to DMX OUT.
DMX CONTROLLER
DMX In DMX Out
DMX In DMX Out
2.3 AC Power
The fixture is designed to work on AC 100V – 240V 50-60Hz. All
units must be powered directly from a switched circuit.
Warning!!! All fixtures must be connected to circuits with a
suitable Earth Ground.
3. Operation Instructions
3.1 Control Panel
- MENU: To scroll over main menu
- UP: To increase the value.
- DOWN: To decrease the value.
- ENTER: To confirm setting
| Menu | Function |
|---|---|
| A001-512 | 9 DMX channel mode, set address 001-512 |
| d001-512 | 6 DMX channel mode, set address 001-512 |
| CC00-99 | Color step changing from slow to fast |
| CP00-99 | Color cross fade from slow to fast |
| dE00-99 | Color pulse changing from slow to fast |
| dEdF -on- / -oFF | Color changing to sound |
| r000-255 | Set display backlight on/off |
| G000-255 | Manual control of Red |
| b000-255 | Manual control of Green |
| o000-255 | Manual control of Blue |
| Y000-255 | Manual control of White |
| Manual control of Amber |
3.3 DMX Mode
9 DMX Channels
| Channel | DMX value | Functions |
|---|---|---|
| 1 | 0 – 255 | Master dimmer 0 – 100% |
| 2 | 0 – 255 | Red Intensity 0 – 100% |
| 3 | 0 – 255 | Green Intensity 0 – 100% |
| 4 | 0 – 255 | Blue Intensity 0 – 100% |
| 5 | 0 – 255 | White Intensity 0 – 100% |
| 6 | 0 – 255 | Amber Intensity 0 – 100% |
| 7 | 0 – 10 | No function |
| 11 – 250 | Strobe from slow to fast | |
| 251 – 255 | Strobe to sound | |
| 8 | 0 – 10 | No function |
| 11 – 60 | Static color selection by ch9 | |
| 8 | 61 – 110 | Color cross fade, speed from slow to fast by ch9 |
| 111 – 160 | Color pulse changing, speed from slow to fast by ch9 | |
| 161 – 210 | Color step changing, speed from slow to fast by ch9 | |
| 211 – 255 | Sound activation Static color selection or Macro speed from slow to fast |
Product Usage Instructions
- Make sure the fixture is properly grounded and connected to a
circuit with a suitable Earth Ground. - Always turn off, unplug power, and allow the fixture to cool
before servicing or replacing the fuse. - Do not look directly into the LED light beam at a close
distance or stare into the beam for extended periods at a short
distance. - Mount the controller in a safe position, ensuring there is
enough room for ventilation. Use safety cables capable of holding
10 times the weight of the fixture. - Link fixtures using DMX cables from DMX IN to DMX OUT.
- Ensure you are connecting to the proper voltage and that the
line voltage is not higher than that stated on the decal or rear
panel of the fixture. - Use the control panel to scroll over the main menu and increase
or decrease values using the UP and DOWN buttons. Confirm settings
using the ENTER button. - In DMX mode, use the channel values to control Master dimmer,
Red Intensity, Green Intensity, Blue Intensity, White Intensity,
and Amber Intensity. Choose from strobe, static color selection,
color cross fade, color pulse changing, color step changing, sound
activation, or no function for the remaining channels.
SILENT18
User manual
1.1 Unpacking The following items are included in the box: µ 1 x Outdoor PAR µ 1 x Power cable µ 1 x User Manual
µ
1.2 Safety Instructions
Warning!!! To reduce the risk of fire, electric shock, or injury to persons,
! follow these important safety instructions:
This product is suitable for indoor and outdoor use. Always turn off, unplug power and allow fixture to cool before servicing. Ensure that fixture is properly grounded. Please keep this User Guide for future consultation. Always make sure that you are connecting to the proper voltage and that the
line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture. Always disconnect from power before servicing or replacing fuse. Make sure power cord is never crimped or damaged. Do not look into the beam from a distance of less than 40 cm (16 inches). Do not stare into the beam for extended periods at a short distance.
Caution! Avaid looking directly into the LED light beam at a close distance!
1
1.3 Features
Flicker free operation Smooth color mixing by RGBWA 5in1 LEDs 5 working modes: DMX, Auto, Sound, Manual, Master/Slave DMX channels: 9/6 ch. Linear dimmer 0-100% Strobe 1-25 flash per second 4-button LED display Seetronic power & signal connector
1.4 Product overview
DMX IN POWER IN
DMX OUT POWER OUT
2. SETUP
DISPLAY
2.1 Mounting This controller can be mounted in any SAFE position provided there is enough room for ventilation.
IMPORTANT!!! Safety cables must always be used. The safety cable must be capable of holding 10 times the weight of the fixture.
2.2 Fixture Linking
To run your light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures in master/slave operating mode, you need DMX cables to link the units from DMX IN to DMX OUT.
DMX CONTROLLER
DMX In DMX Out
DMX In DMX Out
2
2.3 AC Power The fixture is designed to work on AC 100V – 240V 50-60Hz. All units must be powered directly from a switched circuit.
Warning!!! All fixtures must be connected to circuits with a suitable Earth Ground.
3. OPERATION INSTRUCTIONS
3.1 Control Panel
MENU UP DOWN ENTER
MENU: To scroll over main menu UP: To increase the value. DOWN: To decrease the value. ENTER: To confirm setting
Menu A001-512 d001-512 CC00-99 CP00-99 dE00-99 dEdF -on- / -oFF r000-255 G000-255 b000-255 o000-255 Y000-255
Function 9 DMX channel mode, set address 001-512 6 DMX channel mode, set address 001-512 Color step changing from slow to fast Color cross fade from slow to fast Color pulse changing from slow to fast Color changing to sound Set display backlight on/off Manual control of Red Manual control of Green Manual control of Blue Manual control of White Manual control of Amber
3
3.3 DMX Mode
9 DMX Channels
Channel DMX valude
1
0 – 255
2
0 – 255
3
0 – 255
4
0 – 255
5
0 – 255
6
0 – 255
0 – 10
7
11 – 250
251 – 255
0 – 10
11 – 60
8
61 – 110
111 – 160
161 – 210
211 – 255
9
0 – 255
Functions Master dimmer 0 – 100% Red Intensity 0 – 100% Green Intensity 0 – 100% Blue Intensity 0 – 100% White Intensity 0 – 100% Amber Intensity 0 – 100% No function Strobe from slow to fast Strobe to sound No function Stactic color selection by ch9 Color cross fade, speed from slow to fast by ch9 Color pulse changing, speed from slow to fast by ch9 Color step changing, speed from slow to fast by ch9 Sound activation Static color selection or Macro speed from slow to fast
6 DMX Channels
Channel DMX valude
1
0 – 255
2
0 – 255
3
0 – 255
4
0 – 255
5
0 – 255
0 – 10
6
11 – 250
251 – 255
Functions Red Intensity 0 – 100% Green Intensity 0 – 100% Blue Intensity 0 – 100% White Intensity 0 – 100% Amber Intensity 0 – 100% No function Strobe from slow to fast Strobe to sound
4. Specifications
Light source: 18 x 10W RGBWA 5-in-1 LEDs Optical lens: 25° Power consumption: 200W Max. Power input: AC 100-240V 50-60Hz Size: 235*120*275 mm Weight: 5 kg
4
