1373523
Built-in Surface Mounted Light
Instructions
1373523 Komplex Built-in Surface Mounted Light
4/ 2-IN-1 FUNKTION
Aufbau- oder Einbaupanel
Function option
Product Size & Cutout
Installation
This product contains light sources of energy efficiency class “F”.
3000 K / 4000 K / 6500 KLED 2565 lm / 24 W
220-240V~ / 50 Hz 20.000 h IP20 / SKII
Safety instructions
Electrical connections may only be carried out by expert staff. The manufacturers do not accept responsibility for injuries or defects caused by improper use of a luminaire. The lamp is only for indoor use.
Attention!
Before beginning any work on the lamp, disconnect it from the mains power line by removing the fuse or unplugging the power plug. This also applies to cleaning and maintenance. Prior to starting installation work, de-energize the power line – remove the fuse and/or set the switch to “OFF.
Lamps with transformers may be operated only with the original transformer.
Lamps are not toys!
Children frequently do not recognize the dangers associated with electric appliances or their packaging. Therefore, you should keep them away from children. If you give this lamp to someone else, always include these instructions. If the lamp is damaged, the cord or lamp socket is, discontinue the use of the lamp immediately. In the event of a malfunction, always have the lamp repaired by a qualified electrician. Never attempt to repair the lamp yourself. Improper repairs can endanger the safety of the user.
Protection class 
. This luminaire is particularly isolated and must not be connected to a protective earth-terminal.
Risk of eye injury! Look never directly into the LED diodes of this light. The LED cannot be replaced in the luminaire. The given mains voltage may not be exceeded. Plug and connection elements must be free of train and trick strengths.
Environmental protection!
Dispose of the lamp at the collection points designated for electronic waste.
1373523_Manual_16651_V2.docx
Nave Leuchten GmbH
Australia 5
D – 74670 Forchtenberg
www.naeve-leuchten.de
