Ubiquiti Amo-2g10 Omni Antenna User Guide

AMO-2G10 Omni Antenna

Product Information

The AMO-2G10 is a wireless access point antenna designed for
outdoor use. It has a frequency range of 2.35-2.55GHz and provides
a maximum gain of 10dBi. The antenna comes with all necessary
mounting hardware and RF cables. It is compatible with universal
pole mount, RocketM mount, and waterproof RF jumpers. The device
complies with ETSI specification EN 302 326 DN2.

Specifications

• Dimensions: 1012 x 122 x 105mm (39.84 x 4.8 x 4.13)
• Weight with mounting: 2.1kg (4.24lbs)
• Frequency: 2.35 – 2.55GHz
• Gain: 10dBi
• Amplitude electric tilt down: 12th
• VSWR max.: 1.7:1
• Wind resistance: 200km/h (125mph)
• Wind load: 97.9 N at 200 km/h (22 lbf at 125 mph)
• Polarization: double linear
• Cross Polarity Isolation: 25dBmin
• Radio frequency connectors: 2 RP-SMA (waterproof)

Safety Instructions

• Read, follow, and save the instructions.
• Pay attention to all warnings.
• Only use the devices or accessories indicated by the
  manufacturer.
• Do not use this product in a place where it may be submerged in
  water.
• Avoid using this product during a lightning storm.
• Comply with the current, frequency, and voltage requirements
  indicated on the manufacturer’s label.
• Only a qualified service technician should provide
  services.

Compliance

• The antenna and transmitter must be installed to maintain a
  separation distance from people and must not be co-located or used
  in conjunction with any other antenna or transmitter. For the
  specific separation distance, see the quick start guide for your
  Rocket device (transmitter).
• The device complies with WEEE and ETSI specification EN 302 326
  DN2.

Product Usage Instructions

1. Open the package and check that all components are present:
   antenna, foot clamps (qty: 2), round head screws (qty: 4), serrated
   flange nuts (qty: 4), and RF cables (qty: 2).
2. Select a suitable mounting location for the antenna that meets
   safety requirements and provides optimal signal strength.
3. Attach the foot clamps to the antenna using the round head
   screws and serrated flange nuts.
4. Mount the antenna onto a pole using the universal pole mount,
   RocketM mount, or waterproof RF jumpers as appropriate.
5. Connect the RF cables to the antenna’s RP-SMA connectors and to
   the transmitter device.

Translated from Spanish to English – www.onlinedoctranslator.com
AMO-2G10 Quick Start Guide
Package content

Antenna

Foot Clamps (Qty: 2)

round head screws (qty: 4)

serrated flange nuts (qty: 4)

RF cables (qty: 2)

installation requirements
Rocket®M2 (sold separately) 13mm wrench Category 5 (or higher) shielded cabling must be used for all Ethernet connections and must be connected to the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and electrostatic discharge phenomena with Ubiquiti’s Industrial Grade Shielded Ethernet Cable. For more information, visit ui.com/toughcable
Device installation

1. 2.

3. 4.

5.

Specifications
Dimensions
Weight with mounting
Frequency Revenue lift amplitude electric tilt down VSWR max. Wind resistance wind load
Polarization Cross Polarity Isolation Radio frequency connectors
Mounting
ETSI specification

AMO-2G10

1012 x 122 x 105mm (39.84 x 4.8 x 4.13″)

2.1kg (4.24lbs)

2.35 – 2.55GHz

10 dBi 12th 4th
1.7:1

200km/h (125mph)

97.9 N at 200 km/h (22 lbf at 125 mph)

double linear

25dBmin

Connectors 2 RP-SMA (waterproof)

Universal pole mount, RocketM mount and waterproof RF jumpers included

EN 302 326 DN2

safety instructions
1. Read, follow and save these instructions. 2. Pay attention to all warnings. 3. Only use the devices or accessories indicated by the manufacturer.
WARNING:Do not use this product in a place where it may be submerged in water.
WARNING:Avoid using this product during a lightning storm. There is a remote possibility of an electrical discharge caused by lightning.
electrical safety information
1. It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer’s label. Connection to a power source other than those specified may result in malfunction, equipment damage, or fire hazard if limitations are not followed.
2. This equipment contains no operator-serviceable parts. Only a qualified service technician should provide services.
limited warranty
ui.com/support/warranty
The limited warranty requires arbitration to resolve disputes on a case-by-case basis and, where appropriate, specifying arbitration instead of jury trials or class actions.
Compliance

Radio Frequency Exposure Warning
The antenna and transmitter must be installed to maintain a separation distance from people and must not be co-located or used in conjunction with any other antenna or transmitter. For the specific separation distance, see the quick start guide for your Rocket device (transmitter).
WEEE Compliance Statement
Declaration of conformity online resources
© 2022 Ubiquiti Inc. All rights reserved.

References

• Ubiquiti - Warranty
• Ubiquiti - Rethinking IT
• Free Online Translator - Preserves your document's layout (PDF, Word, Excel, PowerPoint, OpenOffice, text)
• community.ubnt.com/
• WEEE Compliance Statement
• Free Online Translator - Preserves your document's layout (PDF, Word, Excel, PowerPoint, OpenOffice, text)
• Ubiquiti - Rethinking IT
• Ubiquiti - Compliance
• Ubiquiti - Downloads
• Ubiquiti - Warranty