Earthway 2750 Broadcast Spreader Instruction Manual (+ PDF)

Contents hide

2750 Broadcast Spreader

Product Information:

This user manual provides information about the parts included
in the product and their respective descriptions. The product is a
hand-crank assembly that includes an impeller, screws, torsion
washer, torsion spring, shut-off assembly, cam, gear case assembly,
wing nut, indicator, bolt and hand crank assembly.

The impeller included in the product is 9 inches in size. The
screws included are of different types such as HWHS screw, PHPS
screw, UNSHW screw, and PMT screw. The product also includes a
Torsion washer and spring, which helps in providing additional
force while cranking. The shut-off assembly and cam help in
controlling the flow of the product. The gear case assembly helps
in transmitting the power from the hand crank to the impeller. The
wing nut helps in tightening and loosening the assembly, and the
indicator helps in monitoring the flow of the product.

If replacement nuts and bolts are required, they can be found at
a local hardware store.

Product Usage Instructions:

Identify all the parts listed in the user manual.
Assemble the gear case assembly by attaching the impeller to it
using the screws provided.
Attach the shut-off assembly to the gear case assembly using
the PMT screw.
Attach the torsion washer and spring to the cam using the UNSHW
screw.
Attach the cam to the gear case assembly using the PHPS
screw.
Attach the wing nut to the bolt using the HWHS screw.
Attach the indicator to the shut-off assembly using the PMT
screw.
Attach the hand crank assembly to the gear case assembly using
the bolt and tighten it using the wing nut.
Ensure that all the parts are tightly assembled and
secured.
To use the product, hold the hand crank assembly and rotate it
in a clockwise direction to activate the impeller.
Monitor the flow of the product using the indicator and adjust
the shut-off assembly as required.
After use, clean all the parts thoroughly and store in a dry
place.