90950 50lb Ice Melt Broadcast Spreader
Product Information
The EarthWay Model #90950 is a 50 lb Ice Melt Spreader designed
for spreading ice melt on driveways, walkways, and other surfaces.
The spreader has a large opening that allows ice melt to flow
through without the need for an agitator. The spreader is not
designed for spreading fertilizers.
Assembly Instructions
- Remove the spreader from the carton and pull the handle into
position shown at right. Tighten wingnuts to secure. - Install CONTROL ROD into handle using pliers to squeeze into
LEVER. - Insert CONTROL ROD into pivot at the bottom of the hopper and
secure with a hairpin clip.
Helpful Hints
- Attaching the CONTROL ROD and unfolding the handle will require
a pair of pliers to insert pins to secure the CONTROL ROD. - Your spreader is designed to be pushed at three miles per hour,
which is a brisk walking speed. Slower or faster speeds will change
the spread patterns. - Prior to your first use, coat all metal parts (outside and
inside of open-ended tubing) with WD-40 or other spray lube to help
prevent corrosion. - Clean your spreader thoroughly after each use. Wash with clean
water and dry thoroughly and spray a light coating of oil on all
metal parts (inside open end of tubing) to help prevent
corrosion). - Gears are permanently lubricated at the factory. Do not open
the GEARBOX or dirt may enter.
Customer Service
If you have any questions or issues with your EarthWay Model
#90950, please contact EarthWay customer support team at [email protected] or visit
their website at www.earthway.com. The product comes
with a one-year warranty.
MODEL # 90950
50 LB Ice Melt Spreader
ASSEMBLY INSTRUCTIONS
ASSEMBLY
STEP 1: Remove spreader from carton and pull handle into position shown at right. Tighten wingnuts to secure.
Thank you for selecting EarthWay for your spreader needs. Our production team in Northern Indiana takes pride in building this spreader. spreader. Our customer support team is standing ready to ensure your success. Please contact us at www.EarthWay.com to see our full line of commercial, lawn & garden tools. NOTE: The large opening is designed to allow ice melt to flow through spreader without the need for an agitator. This unit is not designed for fertilizer.
For spreading fertilizer, please select the right spreader.
ICE MELT – LARGE OPENING
90950 50lb Ice Melt Spreader
STEP 2: Install CONTROL ROD into handle as shown above. TIP: Install the CONTROL ROD using pliers to squeeze into LEVER. STEP 3: ROTATE FORWARD Insert CONTROL ROD into pivot at bottom of hopper and secure with hair pin clip (Shown to the right.)
PAGE 1
MODEL # 90950
50 LB Ice Melt Spreader
ASSEMBLY INSTRUCTIONS
HELPFUL HINTS
Your ice melt spreader is almost ready to use. Attaching the CONTROL ROD and unfolding the handle will require a pair of pliers to insert pins to secure the CONTROL ROD. NOTE: The large opening is designed to allow ice melt to flow through spreader without the need for an agitator. This unit is not designed for fertilizer Your spreader is designed to be pushed at three miles per hour, which is a brisk walking speed. Slower or faster
speeds will change the spread patterns. Prior to your first use, coat all metal parts (outside and inside of open-ended tubing) with WD-40 or other spray
lube to help prevent corrosion. Clean your spreader thoroughly after each use. Wash with clean water and dry thoroughly and spray a light
coating of oil on all metal parts (inside open end of tubing) to help prevent corrosion). Gears are permanently lubricated at the factory. Do not open the GEARBOX or dirt may enter.
PARTS LIST HOW TO ORDER SPARE PARTS CALL or EMAIL:
TURF DEPOT 800-305-9255 or [email protected]
90950 50lb Ice Melt Spreader
PAGE 2
MODEL # 90950
50 LB Ice Melt Spreader
ASSEMBLY INSTRUCTIONS
CUSTOMER SERVICE
[email protected] | www.EARTHWAY.com | 1009 Maple Street, Bristol, IN 46507
ONE YEAR WARRANTY
EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for a period of one year to the end user with the original purchase receipt. If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion will repair or replace the part(s)/product at no charge provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal wear and tear as determined by EarthWay. EarthWay at its discretion may require that the part(s) or product be returned along with the original purchase receipt for examination and compliance with the terms of this warranty. Do not return any product without first receiving authorization from EarthWay Products, Inc.
To seek remedy under this warranty, contact EarthWay Products, Inc. at [email protected] or write to EarthWay Products, Inc. 1009 Maple Street, Bristol, IN 46507 and describe the nature of the manufacturing defect. SPECIFIC LIMITATIONS: This warranty covers only the part(s) or product; any labor charges associated with repair or replace ment of non-conformances are specifically excluded. Due to the corrosive nature of most fertilizers and ice melt products, EarthWay Products, Inc. makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosio n or its effects.
90950 50lb Ice Melt Spreader
PAGE 3
MODEL # 90950
50 LB Ice Melt Spreader
ASSEMBLY INSTRUCTIONS
90950 50lb Ice Melt Spreader
PAGE 4
Spreaders, Fertilizer, and Garden Tools for Your Lawn - EarthWay
