TG76P4368D02 18 Watts Light
Product Information: Christmas Tree
The Christmas tree is a pre-lit artificial tree that comes with
a stand, tree sections, and dual color light controller. The
electrical rating for the tree is AC 120V, 60Hz, 0.38A input and DC
29V, 0.621A output. The controller has four settings for the
lights: CLEAR-MULTI FADING, CLEAR FADING, CLEAR-MULTI ALTERNATING,
and CLEAR STEADY. The tree is made in China and has item number
TG76P4368D02.
Product Usage Instructions: Christmas Tree Assembly
- Find a level surface near an electrical outlet and assemble the
tree stand by pulling apart the legs of the stand so that they are
x-shaped. When inserting the bottom section of the tree into the
assembled stand, thread the eyebolt into the stand and tighten
until the pole is firmly secured. Make sure that all poles are
firmly secure. - Identify all sections before assembling. Assemble the tree from
the bottom to the top by inserting the pole of Section 1 into the
assembled stand. Make sure the pole is firmly inserted and secured
into the stand. Note: Do not step on the tree legs during
setup. - Follow the direction of the arrow marked on the adapter to
insert each section of the tree. Be sure that all wires are free of
branch hinges. - Plug the adapter into the wall outlet. Your tree should now be
lit. If some bulbs do not light or flicker, search for any loose
plugs and/or broken, loose or missing bulbs. Connect the plugs or
replace the bad bulbs promptly in order to maintain the performance
and life expectancy of your pre-lit tree. - Begin to shape the branches and tips in the bottom section
inserted into the tree stand. Start with the tips closest to the
middle of the tree; pull the individual tips alternately upward and
outward working your way to the tip of the branches. Work row by
row to the upper part of the tree section leaving no tip untouched.
Continue to shape each branch as described above as you set up each
tree section.
Product Usage Instructions: Christmas Tree Storage
- Unplug cord from the wall outlet first and then remove all
ornaments and decorations. - Disassemble the tree from the top to the bottom. Start with the
tree top and gently lift straight up to remove from section below
and fold all branches toward the pole. - Continue by gently lifting straight up each section(s) from the
section below and fold all branches toward the pole until the
bottom section is removed from the tree stand. - Carefully place all tree sections into shipping box and tape it
shut. - When not in use, please store your tree in a cool, dry place
away from sunlight. Exposing your tree to excessive heat or
humidity may damage your tree.
Product Usage Instructions: Dual Color Light Controller
To use the dual color light controller, press the selector
button to select among four settings: CLEAR-MULTI FADING, CLEAR
FADING, CLEAR-MULTI ALTERNATING, and CLEAR STEADY.
ASSEMBLY INSTRUCTIONS
LIGHT ASSEMBLY DIAGRAM 18 Watts
Thank you for purchasing your Christmas tree. The instructions below will help you quickly and easily set up your new tree.
1. Find a level surface near an electrical outlet and assemble the tree stand as shown in Fig. A.
Fig. A – Tree Stand Assembly
Eye Bolt
1. Pull apart the legs of the stand so that they are x-shaped.
2. When inserting the bottom section of the tree into the assembled stand, thread the eyebolt into the stand and tighten until the pole is firmly secured.
Fig. B – Tree and Lights Assembly
*Electrical Rating For The Tree (For Indoor Use Only) Input: AC 120V, 60Hz, 0.38A Output: DC 29V, 0.621A Controller : 0.621A
3 2
Do Not Tamper Internal Parts
Align both arrows in a straight line before sliding down to insert
1
Control box
Adapter To Be Plugged
Into Wall Outlet
2. Each tree section is numbered with a tag. Identify all sections before assembling.
3. Assemble the tree from the bottom to the top. Insert the pole of Section 1 into the assembled stand. Make sure the pole is firmly inserted and secured into the stand. Note: Do not step on the tree legs during the setup. This may deform the tree stand and may result in an unbalanced tree.
ITEM #: TG76P4368D02
1
MADE IN CHINA
ASSEMBLY INSTRUCTIONS
4. Follow the direction of the arrow marked on the adapter to insert. Ensure that all poles are firmly secure. Continue this step until the entire tree is set up. Be sure that all wires are free of branch hinges.
5. Plug the adapter into the wall outlet (See Fig. B). Your tree should now be lit. If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connect the plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
6. Begin to shape the branches and tips in the bottom section inserted into the tree stand. Start with the tips closest to the middle of the tree; pull the individual tips alternately upward and outward working your way to the tip of the branches (See Fig. C). Work row by row to the upper part of the tree section leaving no tip untouched. Continue to shape each branch as described above as you set up each tree section.
Fig. C
Top view
Side view
STORAGE INSTRUCTIONS
1. Unplug cord from the wall outlet first and then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below and fold all branches toward the pole.
3. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the bottom section is removed from the tree stand.
4. Carefully place all tree sections into shipping box and tape it shut.
5. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity may damage your tree.
HOW TO USE THE DUAL COLOR LIGHT CONTROLLER:
Press the selector button on the “Dual Color Light Controller” to select among: (1) CLEAR-MULTI: FADING (2) CLEAR: FADING (3) CLEAR-MULTI: ALTERNATING (4) CLEAR: STEADY
Selector Button
(5) CLEAR-MULTI: SLOW FADING (6) MULTI: STEADY
(7) MULTI: FADING (8) COMBINATION
TROUBLESHOOTING TIPS
For pre-lit trees, if the tree does not illuminate:
Light Controller
1. Check to make sure that all plugs and adapter are properly connected as indicated in Fig. B. (If the tree comes with a foot pedal, try stepping on the on/off button).
2. Turn the poles gently to make sure pole-to-pole connection is secured.
3. Check for loose, broken or missing bulbs, and replace as needed.
Loose Branches 1. Extra hinge pins are included for repairing the hinges of
the branches. Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure using the retainer washer. (See Fig. D)
Fig. D
SPARE PARTS
This tree includes spare hinge pins, washers and bulbs.
CAUTION
1. To reduce the risk of fire and electric shock: a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights and may cause fire, or electrical shock hazards. b) Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal. c) Do not mount or support strings in a manner that can cut or damage wire insulation.
2. The controller and remote controller (if included) can only be used with this product.
2
MADE IN CHINA
