Williams Sonoma Tg46p4368l01 Classic Fraser Fir 7.84 Watts Instruction Manual

TG46P4368L01 Classic Fraser Fir 7.84 Watts

Product Information: Christmas Tree with Lights

This Christmas tree comes with pre-installed lights and a tree
stand for easy setup. The tree is suitable for indoor use only and
has an electrical rating of AC 120V, 60Hz, 0.16A input and DC 28V,
0.28A output. The product is made in China and has an item number
of TG46P4368L01.

Assembly Instructions

1. Find a level surface near an electrical outlet and assemble the
   tree stand as shown in Fig. A.
2. Identify all tree sections before assembling.
3. Assemble the tree from bottom to top by inserting the pole of
   each section into the assembled stand. Make sure the pole is firmly
   inserted and secured into the stand.
4. Follow the direction of the arrow marked on the adapter to
   insert. Ensure that all poles are firmly secure. Continue this step
   until the entire tree is set up. Be sure that all wires are free of
   branch hinges.
5. Plug the adapter into the wall outlet. If some bulbs do not
   light or flicker, search for any loose plugs and/or broken, loose
   or missing bulbs. Connect the plugs or replace the bad bulbs
   promptly to maintain the performance and life expectancy of your
   pre-lit tree.
6. Shape the branches and tips in each section as described in
   Fig. C.

Storage Instructions

1. Unplug cord from the wall outlet first and then remove all
   ornaments and decorations.
2. Disassemble the tree from top to bottom; fold all branches
   toward the pole.
3. Carefully place all tree sections into shipping box and tape it
   shut.
4. Store your tree in a cool, dry place away from sunlight to
   prevent damage.

Troubleshooting Tips

If the tree does not illuminate:

1. Check to make sure that all plugs and adapter are properly
   connected as indicated in Fig. B. (If the tree comes with a foot
   pedal, try stepping on the on/off button).

ASSEMBLY INSTRUCTIONS

LIGHT ASSEMBLY DIAGRAM 7.84 Watts
Thank you for purchasing your Christmas tree. The instructions below will help you quickly and easily set up your new tree.
1. Find a level surface near an electrical outlet and assemble the tree stand as shown in Fig. A.

Fig. A – Tree Stand Assembly

Eye Bolt

1. Pull apart the legs of the stand so that they are x-shaped.
2. When inserting the bottom section of the tree into the assembled stand, thread the eyebolt into the stand and tighten until the pole is firmly secured.

Fig. B – Tree and Lights Assembly

*Electrical Rating For The Tree (For Indoor Use Only) Input: AC 120V, 60Hz, 0.16A Output: DC 28V, 0.28A

Do Not Tamper Internal Parts

2

Align both arrows

in a straight line

before sliding

down to insert

MADE IN CHINA

1 ITEM #: TG46P4368L01

Adapter To Be Plugged
Into Wall Outlet
1

ASSEMBLY INSTRUCTIONS

2. Each tree section is numbered with a tag. Identify all sections before assembling.
3. Assemble the tree from the bottom to the top. Insert the pole of Section 1 into the assembled stand. Make sure the pole is firmly inserted and secured into the stand. Note: Do not step on the tree legs during the setup. This may deform the tree stand and may result in an unbalanced tree.
4. Follow the direction of the arrow marked on the adapter to insert. Ensure that all poles are firmly secure. Continue this step until the entire tree is set up. Be sure that all wires are free of branch hinges.
5. Plug the adapter into the wall outlet (See Fig. B). Your tree should now be lit. If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connect the plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
6. Begin to shape the branches and tips in the bottom section inserted into the tree stand. Start with the tips closest to the middle of the tree; pull the individual tips alternately upward and outward working your way to the tip of the branches (See Fig. C). Work row by row to the upper part of the tree section leaving no tip untouched. Continue to shape each branch as described above as you set up each tree section.

Fig. C
Top view

Side view

STORAGE INSTRUCTIONS
1. Unplug cord from the wall outlet first and then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below and fold all branches toward the pole.
3. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the bottom section is removed from the tree stand.
4. Carefully place all tree sections into shipping box and tape it shut.
5. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity may damage your tree.

TROUBLESHOOTING TIPS
For pre-lit trees, if the tree does not illuminate:
1. Check to make sure that all plugs and adapter are properly connected as indicated in Fig. B. (If the tree comes with a foot pedal, try stepping on the on/off button).
2. Turn the poles gently to make sure pole-to-pole connection is secured.
3. Check for loose, broken or missing bulbs, and replace as needed.

Loose Branches 1. Extra hinge pins are included for repairing the hinges of
the branches. Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure using the retainer washer. (See Fig. D)

Fig. D

SPARE PARTS
This tree includes spare hinge pins, washers and bulbs.

CAUTION
To reduce the risk of fire and electric shock: a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights
and may cause fire, or electrical shock hazards. b) Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal. c) Do not mount or support strings in a manner that can cut or damage wire insulation.

MADE IN CHINA

2