Williams-sonoma Tg90p4368l04 Classic Fraser Fir-9-led Clear Christmas Tree Instruction Manual

TG90P4368L04 Classic Fraser Fir-9-LED Clear Christmas Tree

Product Information

The Christmas tree is a pre-lit artificial tree that comes with
a tree stand, numbered tree sections, and an adapter. The tree has
an electrical rating for indoor use only, with input AC 120V, 60Hz,
0.38A and output DC 28V, 0.643A. The tree is made in China and has
an item number of TG90P4368L04.

Product Usage Instructions

  1. Find a level surface near an electrical outlet and assemble the
    tree stand by pulling apart the legs of the stand so that they are
    x-shaped. Insert the bottom section of the tree into the assembled
    stand, thread the eye bolt into the stand, and tighten until the
    pole is firmly secured.
  2. Identify all numbered tree sections before assembling. Assemble
    the tree from the bottom to the top by inserting the pole of
    Section 1 into the assembled stand. Make sure the pole is firmly
    inserted and secured into the stand, ensuring that all poles are
    firmly secure. Continue this step until the entire tree is set up.
    Be sure that all wires are free of branch hinges.
  3. Plug the adapter into the wall outlet to light up the tree. If
    some bulbs do not light or flicker, search for any loose plugs
    and/or broken, loose or missing bulbs. Connect the plugs or replace
    the bad bulbs promptly in order to maintain the performance and
    life expectancy of your pre-lit tree.
  4. Begin to shape the branches and tips in the bottom section
    inserted into the tree stand. Start with the tips closest to the
    middle of the tree; pull the individual tips alternately upward and
    outward working your way to the tip of the branches. Work row by
    row to the upper part of the tree section leaving no tip untouched.
    Continue to shape each branch as described above as you set up each
    tree section.
  5. When not in use, unplug cord from the wall outlet first and
    then remove all ornaments and decorations. Disassemble the tree
    from the top to the bottom by gently lifting straight up each
    section(s) from the section below and fold all branches toward the
    pole until the bottom section is removed from the tree stand.
    Carefully place all tree sections into shipping box and tape it
    shut. Store your tree in a cool, dry place away from sunlight.

Troubleshooting Tips

If the pre-lit tree does not illuminate, check to make sure that
all plugs and adapters are properly connected as indicated in Fig.
B. If the tree comes with a foot pedal, try stepping on the on/off
button.

ASSEMBLY INSTRUCTIONS

LIGHT ASSEMBLY DIAGRAM 18 Watts
Thank you for purchasing your Christmas tree. The instructions below will help you quickly and easily set up your new tree.
1. Find a level surface near an electrical outlet and assemble the tree stand as shown in Fig. A.

Fig. A – Tree Stand Assembly

Eye Bolt

1. Pull apart the legs of the stand so that they are x-shaped.
2. When inserting the bottom section of the tree into the assembled stand, thread the eyebolt into the stand and tighten until the pole is firmly secured.

Fig. B – Tree and Lights Assembly

*Electrical Rating For The Tree (For Indoor Use Only) Input: AC 120V, 60Hz, 0.38A Output: DC 28V, 0.643A

5

4 3

Do Not Tamper Internal Parts
Align both arrows in a straight line before sliding down to insert

2

1
Adapter To Be Plugged
Into Wall Outlet

MADE IN CHINA

ITEM #: TG90P4368L04

1

ASSEMBLY INSTRUCTIONS

2. Each tree section is numbered with a tag. Identify all sections before assembling.
3. Assemble the tree from the bottom to the top. Insert the pole of Section 1 into the assembled stand. Make sure the pole is firmly inserted and secured into the stand. Note: Do not step on the tree legs during the setup. This may deform the tree stand and may result in an unbalanced tree.
4. Follow the direction of the arrow marked on the adapter to insert. Ensure that all poles are firmly secure. Continue this step until the entire tree is set up. Be sure that all wires are free of branch hinges.
5. Plug the adapter into the wall outlet (See Fig. B). Your tree should now be lit. If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connect the plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
6. Begin to shape the branches and tips in the bottom section inserted into the tree stand. Start with the tips closest to the middle of the tree; pull the individual tips alternately upward and outward working your way to the tip of the branches (See Fig. C). Work row by row to the upper part of the tree section leaving no tip untouched. Continue to shape each branch as described above as you set up each tree section.

Fig. C
Top view

Side view

STORAGE INSTRUCTIONS
1. Unplug cord from the wall outlet first and then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below and fold all branches toward the pole.
3. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the bottom section is removed from the tree stand.
4. Carefully place all tree sections into shipping box and tape it shut.
5. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity may damage your tree.

TROUBLESHOOTING TIPS
For pre-lit trees, if the tree does not illuminate:
1. Check to make sure that all plugs and adapter are properly connected as indicated in Fig. B. (If the tree comes with a foot pedal, try stepping on the on/off button).
2. Turn the poles gently to make sure pole-to-pole connection is secured.
3. Check for loose, broken or missing bulbs, and replace as needed.

Loose Branches 1. Extra hinge pins are included for repairing the hinges of
the branches. Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure using the retainer washer. (See Fig. D)

Fig. D

SPARE PARTS
This tree includes spare hinge pins, washers and bulbs.

CAUTION
To reduce the risk of fire and electric shock: a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights
and may cause fire, or electrical shock hazards. b) Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal. c) Do not mount or support strings in a manner that can cut or damage wire insulation.

MADE IN CHINA

2

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals