MONA Series KNX Switch
Product Information: MONA Series EAE KNX MONA Switch
The MONA Switch R0 is a premium push-button series that adds
natural harmony and elegance to your interior design with
sophisticated technology. It is designed to control switches, dim
lights, activate scenes, control blinds, and more. The switch is
installed with a metal flange and fixed to the junction box using
screws. The device has magnets and should be positioned with the
program button facing downwards. Multiple devices can be combined
up to three, with a distance of 71mm between the center of
flanges.
The MONA Switch R0 has the following features:
- Switching
- Dimming
- Shutter/Blind control
- Value Scene control
- Status notification
The device has four operating elements:
- KNX Port Terminal
- Programming LED
- Programming Button
- Control Buttons
The technical data of the device is as follows:
- Protection Type: IP20
- Safety Class: EN 60 529 II
- Connections: KNX Bus Connection
- Power Supply Voltage: 21V to 30V DC, KNX
- Current Drawn from Bus: N/A
- Operating Temperature: EN 61 140
- Humidity: N/A
- Dimensions: N/A
- Weight: N/A
- Box Material: N/A
- Color: N/A
- CE: Yes
Product Usage Instructions: MONA Series EAE KNX MONA
Switch
Before installing the MONA Switch R0, ensure that the power
supply is turned off. Follow the below instructions to install and
use the device:
- Fix the switch to the junction box using screws and a metal
flange. - Position the device with the program button facing
downwards. - The device will stick on the flange via magnetization.
- Multiple devices can be combined up to three, with a distance
of 71mm between the center of flanges. - Use the KNX port terminal to connect the device to the KNX bus
connection. - The programming LED and button can be used to customize the
device settings. - Use the control buttons to switch, dim, control blinds,
activate scenes, and receive status notifications. - The device operates at an operating temperature of EN 61
140.
Installation Manual MONA Series EAE KNX MONA Switch
MONA Switch R0
Installaon Installaon of the product is done with metal flange. It is fixed to the juncon box by using screws. The switch has magnets and should be posioned the prog. buon downwards. The device will sck on flange via magnezaon. Mulple devices can be combined up to 3. NOTE: Distance between center of flanges is 71 mm.
Device Descripon
MONA premium push-buon series create a natural harmony and adds value to your interior designs with elegant look and sophiscated technology. It is used to control the switches, dim the lights, acvang scenes, control blinds and vice versa.
· Monoblock glass design
· 60×60 mm easy mounng to standard juncon boxes. · Different glass color opons · Configurable RGB illuminated buons · Up to 12 independent programmable buons
Switching Dimming Shuer/Blind
Value Scene control Status noficaon
Operaon and Display
1. KNX Port Terminal 2. Programming LED 3. Programming Buon 4. Control Buons
4 1
Technical Data
Protecon Type Safety Class Connecons Power Supply Operang Elements Operang Temperature Humidity
Dimensions
Weight Box Material
Color
CE
IP20
EN 60 529
II
EN 61 140
KNX
Bus Connecon
Voltage
21V… 30V DC, KNX
Current drawn from bus
<19mA
LED (red)
Addr Prog.LED
LED (white)
Buon Status LEDs
Ambient
-5° C + 45° C
Storage
-25° C + 55° C
Max. Air humidity
95% no moisture
Front side
90 x 100 mm
Side Surface mounted part 12 mm
Side Flush mounted part 18.8 mm
65 g
Glass Surface
Polycarbonate Flush mounted part
Front Side Glass Black or White
Flush mounted part Polycarbonate – Black
In accordance with the EMC guideline and low voltage
direcves
Commissioning Device default physical address is 15.15.255. Determinaon of the physical address and seng of parameters are actualized with Engineering Tool Soware (ETS4 or higher). “.knxprod” file must be imported to the ETS. (hp://www.eaetechnology.com/)
A detailed informaon about parameter configuraon can be found in Product Manual of device.
Installaon and commissioning of device may only be implemented by trained electricians. The relevant standards, direcves, regulaons and instrucons must be observed when planning and implemenng the electrical installaon. -Protect the device against moisture, dirt and damage during transport, storage and operaon!
-Do not operate the device out of the specified technical data which is stated.
-The device may only be operated in closed enclosures (Distribuon boards)
Cleaning If device becomes dirty, only a dry cloth can be used for cleaning. t is not suitable to use wet cloths, causcs and solvents.
© EAE Technology
www.eaetechnology.com
EAE Technology – KNX Akıllı Ev Sistemi, Aydınlatma Otomasyonu
