Pioneer TS-D10LS410˝ Single Voice Coil Subwoofer


Specifications
- Product Dimensions: 3.88 x 10.5 x 10.5 inches
- Item Weight: 8.5 pounds
- Item model number: TS-D10LS4
- Model Name: PIONEER
- Speaker Type: Subwoofer
- Recommended Uses for Product: For Cars Subwoofer
- Diameter: 10 Inches
What’s in the box?
- PIONEER TSD10LS4 PIONEER 10″ 4 OHM Shallow Mount 1300W WO
FEATURES AND TECHNOLOGY

- 10˝ Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP) cone construction
- Butyl rubber surround for strength and linearity during high excursion
- Shallow basket, small enclosure design for sound optimization and installation flexibility
- Smooth and seamless integration with Pioneer D-series full-range automotive loudspeakers
TOO MUCH ISN’T ENOUGH, EMBRACE THE BASS
The optimized depth and cutout size for outstanding performance combined with ultimate installation flexibility
Linear, balanced motion in both the forward and reverse directions of cone movement is critical to accurate reproduction of recorded sound waves. Careful engineering of the entire motor structure and suspension system (voice coil, magnet, surround and spider) is required maintain a high level of linearity, even during high output / high excursion transients.

Dimensions

Frequency-matched Pioneer D-series full-range speakers available in the following sizes and applications: TS-D69C, TS-D65C (Component Packages)
- TS-D69F (6˝x 9˝)
- TS-D68F (6˝x 8˝)
- TS-D65F (6.5˝)

WARNING: Over time, your hearing “comfort level” adapts to higher volumes of sound, so that what sounds “normal” can actually be doing harm. To protect against hearing loss, set your equipment’s volume at a low setting, slowly increase it until you can hear it comfortably and clearly, and leave it there. Do not turn up the volume so high that you can’t hear
What’s around you?
Protect your investment. Purchase from an Authorized Pioneer Dealer. Only products purchased from an Authorized Pioneer Dealer (or Authorized Pioneer Internet Dealer) qualify for the manufacturer’s warranty and manufacturer’s rebates. Pioneer Electronics (USA) Inc., Post Office Box 1760, Long Beach, California 90801 Pioneer Customer Service Department: 1-800-PIONEER
Note: Specifications, designs, and user interfaces are subject to modification without notice. Product colors and illumination may differ in photographs from actual appearance due to effects of printing and photography
PIONEER and the Pioneer logo are trademarks or registered trademarks of Pioneer Corporation. All other brand, product names, or logos are trademarks or registered trademarks of their respective holders.
Pioneer Electronics (USA) Inc. proudly supports and encourages you to support the Consumer Technology Association (CTA), Mobile Electronics Certification Program (MECP) for installers and the Specialty Equipment Market Association (SEMA)
CHECK OUT MORE AT ON
- YOUWILLHEARMORE.COM
- FACEBOOK.COM/PIONEERNORTHAMERICA
- TWITTER.COM/PIONEERUSA
- INSTAGRAM.COM/PIONEERCARAUDIO
- YOUTUBE.COM/PIONEERELECTRONICS
FAQs
They have audio quality on par with standard subwoofers. The only distinction is that you must install them in the proper location. Since their size doesn’t imply that they aren’t powerful, they can sound even better than other subwoofers of a similar size.
A shallow mount subwoofer frequently doesn’t produce sound of the same calibre as a larger one. A shallow mount subwoofer will have a difficult time reproducing the same bass and low end frequencies as loudly and clearly as another type.
One of the top manufacturers of automobile audio systems is Pioneer. Along with making fantastic subwoofers, they also produce some incredible head units. Since they were established in 1938, they have been in operation for almost a century.
While the shallow TW3 driver only needs 3.25 inches of mounting depth, the large sub requires at least 5.93 inches.
There should be no obstructions in the path of the signal and power leaving your amplifier for your speakers and subwoofer. We advise using speaker cables that are either 18-, 16-, or 14-gauge when replacing or installing new speaker wiring. Subwoofer wires come in gauge sizes of 16, 14, or 12.
There are probably only speaker wire connections in those 4 connectors. In and out are both at two. A built-in filter on the subwoofer can either be adjusted with a knob or is fixed. So you simply cut one of your existing speaker wires in half to connect.
The subwoofer can be connected using an additional set of speaker cables, as shown above, if you’re using it with a stereo receiver that doesn’t have a subwoofer output (which many stereo receivers do). This only works if the subwoofer has speaker-level (speaker wire) connections, like the choices in our Best Budget Subwoofer guide.
Only one 3D hologram sticker is used by Pioneer (green one). This 3D hologram sticker may be found on all Pioneer speakers. The silver one, which Pioneer no longer uses, is typically used by fake speakers. On the box of each Pioneer Speaker is an MRP tag.
With speaker plants in Mexico, Japan, Thailand, China, China, and China, Pioneer has the greatest market share in both the OEM speaker market and the automobile aftermarket.
The best subwoofers for the majority of people are 10-inch and 12-inch models because they are reasonably priced and capable of producing passable sound. 15″ subwoofers are the greatest option if you enjoy listening to music louder because they will provide you with the best overall performance.
You’ll need to locate an amplifier that will power your sub unless your vehicle or boat already has a system that does so.
This subwoofer has a maximum power output of 1300 watts, an RMS power output of 300 watts, a 4 Ohm impedance, and a sensitivity of 96 dB.
Most bass fans position their subwoofers facing the back, pointing them at the tailgate of an SUV or the back of the truck’s cab for a powerful bass sound and feel. Other arrangements are also conceivable, but they will impact how the bass feels and sounds.
12″ Component Subwoofer, Black, Red, 1,300 Watt Peak Handling Capacity, Pioneer.
Your choices are as follows: It costs a little more to use 2 ohms than 4 ohms. The 2 ohm subwoofer is excellent if you desire a louder, punchier sub because it is 2.5 decibels louder. The 4 ohm speaker is preferable if you desire a deeper, cleaner sound.



















