Vesa 75/100 Integrated Monitor Mount
Product Information:
Product Name: Integrated Monitor Mount VESA 75/100
Version: 2.2
Last Updated: 23-02-2022
Before You Start:
Thank you for purchasing this Sim-Lab product! On the following
pages, you will find detailed instructions on assembly. This
requires only a set of simple tools and some of your time. Please
check the bill of materials before starting (page 10) and make sure
all the parts are delivered.
Tools Needed:
5/6MM
–
+
22 | 10
A16 A15
P1
680MM
Slot-Nut M8 Slot-Nut M6
(A15)
(A16)
1X
2X
2X
33 | 10
P2 A15
200MM Slot-Nut M8
2X
6X
44 | 10
A11 A5
A9
Corner Bracket M8 X 16 Washer M8
2X
4X
4X
55 | 10
Attach the VESA bracket (A3) to your monitor before installing
it on the monitor mount profile.
A10
A6 A7
VESA Corner Bracket Cap Profile End-Cap
M6 X 16
1X
2X
4X
2X
A3
66 | 10
Monitor Bracket M8 X 25 Washer M8
2X
4X
4X
A11 A8 A4
77 | 10
PROFILE KIT
# Part QTY Note
P1 40X40 Length=680mm 1
P2 40X40 Length=200mm 2
HARDWARE KIT
A3 VESA bracket L-shape 1
A4 Integrated monitor bracket 2
A5 Corner bracket 40×40 2
A6 Corner bracket 40×40 cap 2
A7 Profile 40×40 end-cap 4
A8 Bolt M8 X 25 DIN 912 10
A9 Bolt M8 X 16 DIN 912 4
A10 Bolt M6 X 16 DIN 912 2
A11 Washer M8 DIN 125-A 16
A12 Screw Philips M4 X 16 DIN 7985 4 Extra
A13 Screw Philips M4 X 10 DIN 7985 4 Extra
A14 Spacer male/female M4 X 10 4 Extra
A15 Slot-Nut M8 16
A16 Slot-Nut M6 2
Disclaimer: for some entries on this list, we supply more than
required as spare materials. Don’t worry if you have some
leftovers, this is intentional.
88 | 10
Mounting suggestion: We advise to divide three bolts over two
profile slots.
A8 A11
99 | 10
If you still have some questions regarding assembly of this
product or about the manual itself, please refer to our support
department. They can be reached at [email protected]
Alternatively, we now have a Discord server where there are
quite some experienced Sim-Lab customers hanging out. They might
just help you along if you ask them nicely 😉 www.sim-lab.eu/discord
If you feel like printing this manual, please consider the
environment before doing so. For the best results, make sure you
print at 100% scale without borders. Product page on the Sim-Lab
website:
1100 | 10
Product Usage Instructions:
- Before starting assembly, ensure that all the parts listed in
the bill of materials are delivered. - Refer to the provided diagram on how to insert a Slot-Nut into
the slot from the side. Use a smaller Hex wrench to help wiggle the
Slot-Nut in place if needed. - If instructed, break off tabs from corner brackets by placing a
flathead screwdriver behind the tab and tilting upwards. Always
ensure to point away from yourself while doing so. - Attach the VESA bracket (A3) to your monitor before installing
it on the monitor mount profile. - Follow the provided instructions to assemble the monitor
bracket, corner brackets, profile end-caps, bolts, washers, screws,
and spacers as per the diagram. - Mount the assembled monitor bracket onto the monitor mount
profile using the appropriate bolts and washers. - If you have any questions or need further assistance, you can
contact the support department at [email protected] or visit the
Sim-Lab Discord server at www.sim-lab.eu/discord. - If you decide to print the manual, please consider the
environment and print at 100% scale without borders for the best
results.
INSTRUCTION MANUAL
INTEGRATED MONITOR MOUNT VESA 75/100
VERSION 2.2
Last updated: 23-02-2022
BEFORE YOU START:
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on assembly. This requires only a set of simple tools and some of your time. Please check the bill of materials before starting (page 10) and make sure all the parts are delivered.
Inserting Slot-Nuts:
You got excited, finished the build, put the caps on, but forgot to install one element. Do not worry. It happens to everyone. In this diagram, you can see how to insert a Slot-Nut directly into the slot from the side. You can also use one of your smaller Hex wrenches to help wiggle the Slot-Nut in place.
Breaking tabs:
Sometimes tabs from corner brackets need to be broken off in order to fit as instructed. Place a flathead screwdriver behind the tab and tilt upwards.
Always make sure to point away from you while doing so.
To know when to do this, we will show the following
symbol
next to the brackets.
Tools needed:
5/6MM
–
+
22 | 10
A16 A15
P1
680MM
Slot-Nut M8 Slot-Nut M6
(A15)
(A16)
1X
2X
2X
33 | 10
P2 A15
200MM Slot-Nut M8
2X
6X
44 | 10
A11 A5
A9
Corner Bracket
M8 X 16 Washer M8
2X
4X
4X
55 | 10
Attach the VESA bracket (A3) to your monitor before installing it on the monitor mount profile.
A10
A6 A7
VESA
Corner Bracket Cap
Profile End-Cap
M6 X 16
1X
2X
4X
2X
A3
66 | 10
Monitor Bracket
M8 X 25 Washer M8
2X
4X
4X
A11 A8 A4
77 | 10
PROFILE KIT
# Part
QTY Note
P1 40X40 Length=680mm
1
P2 40X40 Length=200mm
2
HARDWARE KIT
A3 VESA bracket L-shape
1
A4 Integrated monitor bracket
2
A5 Corner bracket 40×40
2
A6 Corner bracket 40×40 cap
2
A7 Profile 40×40 end-cap
4
A8 Bolt M8 X 25 DIN 912
10
A9 Bolt M8 X 16 DIN 912
4
A10 Bolt M6 X 16 DIN 912
2
A11 Washer M8 DIN 125-A
16
A12 Screw Philips M4 X 16 DIN 7985
4 Extra
A13 Screw Philips M4 X 10 DIN 7985
4 Extra
A14 Spacer male/female M4 X 10
4 Extra
A15 Slot-Nut M8
16
A16 Slot-Nut M6
2
Disclaimer: for some entries on this list, we supply more than required as spare materials. Don’t worry if you have some leftovers, this is intentional.
88 | 10
Mounting suggestion: We advise to divide three bolts over two profile slots.
A8 A11
99 | 10
If you still have some questions regarding assembly of this product or about the manual itself, please refer to our support department. They can be reached at [email protected]
Alternatively, we now have a Discord server where there are quite some experienced Sim-Lab customers hanging out. They might just help you along if you ask them nicely 😉 www.sim-lab.eu/discord
If you feel like printing this manual, please consider the environment before doing so. For the best results, make sure you print at 100% scale without borders. Product page on the Sim-Lab website:
1100 | 10
Sim-Lab
