HCF-4029-NI-BNHD-1 14 Inch 2 Light Modern Brushed Nickel Vanity Light
Product Information:
The product is a lamp fixture that can hold two E26 bulbs with a
maximum wattage of 60W each. The fixture comes with a mounting
bracket (A), canopy (E), canopy nuts (F), mounting bolts (C), wire
nuts (D), shades (H), socket rings (I) and a lamp holder (G). The
product requires wiring in the wall and a junction box (not
included) for installation.
Product Usage Instructions:
- Prepare the wiring in your wall for the desired location of
your new lamp and prepare your junction box (not included). - Unscrew the canopy nuts (F) and take the mounting bracket (A)
off the canopy (E). Connect your mounting bracket to your junction
box using the mounting bolts (C). - Make electrical connections using the wire nuts (D).
- Being careful that no wiring is left exposed, place the canopy
against the mounting bracket and secure it by replacing the canopy
nuts onto the canopy bolts (B) and retightening them. - Install the shades (H) onto the lamp holders (G). Secure them
with the socket rings (I). - Install your bulbs into the sockets. This fixture has been
rated for two E26 bulbs (not included) up to 60W each.
Note: Always follow the instructions carefully while installing
the product. In case of any questions or concerns, contact the
manufacturer at [email protected] for assistance.
INSTRUCTIONS
V20210386
WARNING!
Read these instructions carefully prior to installation. · Check for electric, gas, and plumbing lines before drilling or consult a professional. · ALWAYS cut ALL relevant power before installing a lighting fixture, and do not restore
power to the line until the lamp has been FULLY installed. · DO NOT use with bulbs exceeding the recommended wattage.
ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
2. Unscrew the canopy nuts (F) and take the mounting bracket (A) off the canopy (E). Connect your mounting bracket to your junction box using the mounting bolts (C).
3. Make electrical connections using the wire nuts (D). 4. Being careful that no wiring is left exposed, place the canopy against the mounting bracket and
secure it by replacing the canopy nuts onto the canopy bolts (B) and retightening them. 5. Install the shades (H) onto the lamp holders (G). Secure them with the socket rings (I). 6. Install your bulbs into the sockets. This fixture has been rated for two E26 bulbs (not included)
up to 60W each.
Lamp Holder (G) Shade (H)
Socket Ring (I)
Bulb
Junction Box
Mounting Bracket (A) Canopy Bolt (B) Mounting Bolt (C) Wire Nut (D) Canopy (E)
Canopy Nut (F)
CONTACT US
Thank you for choosing our products! If you have any questions or comments, contact us at [email protected] and we’ll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
HCF-4029-NI HCF-4029-BK Rev. 26 Oct. 2021
Transparent outsourced web hosting tech support |SupportPRO
