Merra Hcf-0602-bz-bnhd-1 32 Inch 4 Light Brushed Brown Vanity Light With Clear Seeded Glass Shades Instructions

HCF-0602-BZ-BNHD-1 32 Inch 4 Light Brushed Brown Vanity Light with Clear Seeded Glass Shades

Product Information: Lamp Fixture HCF-0602

The HCF-0602 is a lamp fixture that can hold up to four E26
bulbs with a maximum wattage of 40W each. The fixture comes with a
mounting bracket, canopy, shades, lamp holders, and wire nuts for
electrical connections. It is available in two finishes, bronze
(HCF-0602-BZ) and nickel (HCF-0602-NI).

Product Usage Instructions:

1. Prepare the wiring in your wall for the desired location of
   your new lamp. Also, prepare your junction box (not included).
2. Unscrew the canopy nuts (A) from the canopy bolts (E) and take
   the mounting bracket (C) off the canopy (G). Connect the mounting
   bracket to your junction box using the mounting bolts (D).
3. Make electrical connections using the wire nuts (F).
4. Be careful that no wiring is left exposed, place the canopy
   against the mounting bracket and secure it by replacing the canopy
   nuts onto the canopy bolts.
5. Fit the shades (B) onto the lamp holders (H), screwing them
   into place.
6. Install your bulbs into the sockets on the lamp holders.
7. Restore the power, turn on your lamp, and enjoy!

Please note that the bulbs are not included with the fixture.
Also, ensure that you follow all safety precautions while
installing and using the lamp fixture. If you have any questions or
concerns, please contact us at [email protected].

INSTRUCTIONS

V20220829

DANGER!
Read these instructions carefully prior to installation. · Check for electric, gas, and plumbing lines before drilling or consult a professional. · ALWAYS cut ALL relevant power before installing a lighting fixture and do not restore
power to the line until the lamp has been FULLY installed. · DO NOT use with bulbs exceeding the recommended wattage.

ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
2. Unscrew the canopy nuts (A) from the canopy bolts (E) and take the mounting bracket (C) off the canopy (G). Connect the mounting bracket to your junction box using the mounting bolts (D).
3. Make electrical connections using the wire nuts (F). 4. Being careful that no wiring is left exposed, place the canopy against the mounting bracket and
secure it by replacing the canopy nuts onto the canopy bolts. 5. Fit the shades (B) onto the lamp holders (H), screwing them into place. 6. Install your bulbs into the sockets on the lamp holders. This fixture has been rated for four E26
bulbs (not included) up to 40W each. 7. Restore the power, turn on your lamp, and enjoy!
Mounting Bracket (C) Junction Box

Canopy Nut (A)

Mounting Bolt (D) Canopy Bolt (E) Wire Nut (F) Canopy (G)

Shade (B) Bulb

Lamp Holder (H)

CONTACT US
Thank you for choosing our products! If you have any questions or comments, contact us at [email protected] and we’ll resolve your issue ASAP! For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
HCF-0602-BZ HCF-0602-NI Rev. 29 Aug. 2022

References

• Transparent outsourced web hosting tech support |SupportPRO