Aiwen Nw-wh92061 15.4 Inch 2-light Modern Black Bathroom Vanity Light Over Mirror With Glass Shade Instructions

Product Information:

• Straight tube (9) – Used to fix the lamp body (10).
• Lamp body (9), (10) – The main body of the lamp.
• Wall lamp socket (5) – The socket on the wall where the lamp
  will be fixed.
• Washer (8) – Used to secure the lamp body (9), (10) on the wall
  lamp socket (5).
• Ground wire (7) – Used for electrical grounding of the
  lamp.
• Nut (6) – Used to tighten and secure the lamp body (9), (10) on
  the wall lamp socket (5).
• Hanging plate (2) – A plate used to attach the lamp to the
  junction box.
• Screws (4) – Used to fix the hanging plate (2) on the junction
  box.
• Lamp body power cord – The power cord connected to the lamp
  body.
• External power cord – The power cord that supplies electricity
  from an external source.
• Terminal cap (1) – Used to connect the lamp body power cord to
  the external power cord.
• Lamp head (11) – The top part of the lamp where the bulb will
  be installed.
• Lampshade (12)(13) – The decorative cover of the lamp.
• Lamp head ring (14) – Used to fix the lampshade (12)(13) on the
  lamp head (11).
• Bulb (15) – The light source for the lamp (bulb not
  included).

Product Usage Instructions:

1. Use a straight tube (9) to fix the lamp body (10).
2. Fix the lamp body (9), (10) on the wall lamp socket (5) and
   lock it with the washer (8), ground wire (7), and the nut (6).
3. Fix the hanging plate (2) on the junction box with the screws
   (4).
4. Connect the lamp body power cord to the external power cord
   using the terminal cap (1).
5. Fix the lamp body (5) on the hanging plate (2) using the screws
   (3).
6. Fix the lampshade (12)(13) on the lamp head (11) with the lamp
   head ring (14).
7. Install the bulb (not included) (15) to the base (11) at the
   recommended wattage.
8. Check if the installation is complete, then turn on the
   power.