HCF-4037-BK-BNHD-1 27.6 Inch 4 Light Black LED Vanity Light
Product Information
The product is a lamp that requires assembly and installation.
It comes with a canopy (E), canopy bolt (D), mounting bolt (B),
mounting bracket (A), wire nut (C), and instructions manual
(V20220379). The lamp does not come with a junction box, which
needs to be prepared separately.
Product Usage Instructions
- Prepare the wiring in your wall for the desired location of
your new lamp. Make sure that the junction box is also prepared
separately. - Remove the canopy bolts (D) and take the mounting bracket (A)
off the canopy (E). - Connect the mounting bracket to your junction box using the
mounting bolts (B). - Make electrical connections using the wire nuts (C).
- Place the canopy against the mounting bracket being careful
that no wiring is left exposed. - Replace the canopy bolts.
- Turn on your lamp and enjoy!
Please note that failure to follow these instructions may result
in damage to the lamp or injury to yourself. If you have any
questions or concerns about the assembly or installation process,
please contact us at [email protected].
To obtain a PDF copy of the latest version of these
instructions, use the appropriate app on your smartphone to scan
the QR code provided in the manual.
INSTRUCTIONS
V20220379
WARNING!
Read these instructions carefully prior to installation. · Check for electric, gas, and plumbing lines before drilling or consult a professional. · ALWAYS cut ALL relevant power before installing a lighting fixture and do not
restore power to the line until the lamp has been FULLY installed. · DO NOT use any SMD LED light plate exceeding 5W.
ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
2. Remove the canopy bolts (D) and take the mounting bracket (A) off the canopy (E). 3. Connect the mounting bracket to your junction box using the mounting bolts (B). 4. Make electrical connections using the wire nuts (C). 5. Being careful that no wiring is left exposed, place the canopy against the mounting bracket
and replace the canopy bolts. 6. Turn on your lamp and enjoy!
Canopy (E)
Canopy Bolt (D) Mounting Bolt (B)
Junction Box
Mounting Bracket (A) Wire Nut (C)
Contact Us
Thank you for choosing our products! If you have any questions or comments, contact us at [email protected] and we’ll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
H C F – 4 0 3 7 – B K H C F – 4 0 3 7 – C H R e v. 1 3 A p r. 2 0 2 2
Transparent outsourced web hosting tech support |SupportPRO
