Merra Hcf-4041-ch-bnhd-1 3-light Chrome Led Vanity Light With Acrylic Shades Instructions (+ PDF)

Prepare the wiring in your wall for the desired location of
your new lamp. Prepare your junction box (not included).
Remove the canopy bolts (E) and take the mounting bracket (A)
off the canopy (D).
Connect the mounting bracket to your junction box using the
mounting bolts (B).
Make electrical connections using the wire nuts (C).
Being careful that no wiring is left exposed, place the canopy
against the mounting bracket and replace the canopy bolts.
Fit the decorative tubes (G) onto the SMD LED light plates
inside the lamp holders (H).
Mount the shades (F) onto the lamp holders.
Turn on your lamp and enjoy!

WARNING: Do not restore power to the line until
the lamp has been fully installed.

Contact Us

Thank you for choosing our products! If you have any questions
or comments, contact us at [email protected] and we’ll resolve
your issue ASAP! For a .pdf copy of the latest version of these
instructions, use the appropriate app on your smartphone to scan
the QR code to the right.

View Fullscreen

INSTRUCTIONS

V20220415

WARNING!
Read these instructions carefully prior to installation. · Check for electric, gas, and plumbing lines before drilling or consult a professional. · ALWAYS cut ALL relevant power before installing a lighting fixture and do not
restore power to the line until the lamp has been FULLY installed.

ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
2. Remove the canopy bolts (E) and take the mounting bracket (A) off the canopy (D). 3. Connect the mounting bracket to your junction box using the mounting bolts (B). 4. Make electrical connections using the wire nuts (C). 5. Being careful that no wiring is left exposed, place the canopy against the mounting bracket
and replace the canopy bolts. 6. Fit the decorative tubes (G) onto the SMD LED light plates inside the lamp holders (H). 7. Mount the shades (F) onto the lamp holders. 8. Turn on your lamp and enjoy!

Shade (F) Decorative Tube (G)

Canopy Bolt (E) Mounting Bolt (B) Mounting Bracket (A) Junction Box

Lamp Holder (H)
Wire Nut (C)
Canopy (D)
Contact Us
Thank you for choosing our products! If you have any questions or comments, contact us at [email protected] and we’ll resolve your issue ASAP! For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
H C F – 4 0 4 1 – C H R e v. 1 3 A p r. 2 0 2 2