KAMN32F7SA 32 Inch Full Hd Ips 75hz Freesync Monitor
Product Information:
The 32 Full HD IPS 75Hz FreeSync Monitor (model number:
KAMN32F7SA) is a high-quality monitor that provides a resolution of
1920 x 1080. It comes with a stand and a VESA mount (not included)
for flexible installation options. The monitor has HDMI and VGA
ports for connectivity and an audio output port for audio devices.
It also features an on-screen display (OSD) menu for adjusting
settings.
Product Usage Instructions:
- Read all instructions and warnings in the user guide before
assembling and using the monitor. - Assemble the stand by securing the stand connector (B) to the
stand base (C) using two 10mm M4 stand base screws (D). Fix the
monitor (A) to the stand connector (B) with three 10mm M4 stand
base screws (D) in the marked grey holes. Place the cover (F) over
the stand connector (B). - If using a VESA mount, remove the stand connector (B), stand
base (C), and foam covering the back of the monitor (A). Press the
release button to remove the stand plate. Mount the monitor (A) as
desired with the steps provided with your VESA mount. - Connect the monitor to a power socket using the power cable.
Connect audio devices to the audio output port on the monitor.
Connect your input device’s display output to the monitor’s HDMI or
VGA port. - Turn on the power socket. Press the power button on the monitor
to turn it on. The monitor will configure to optimal settings
automatically when used for the first time. - Adjust monitor settings using the OSD menu if needed.
- Press the power button on the monitor again to turn it off when
finished using it.
32″ FULL HD IPS 75HZ FREESYNC MONITOR
1920 x 1080
KAMN32F7SA
SAFETY & WARNINGS
Ensure to read all instructions and warnings in this user guide prior to assembly and use. Retain this user guide for future reference.
· Ensure the monitor is unplugged before cleaning. · This monitor is designed with ventilation holes on the back of the casing. Do not cover
or block them. · Do not insert any object or spray anything into the vents. · Do not place the monitor near heaters, stoves, fireplaces, or other heat sources. · Do not place the monitor in rooms lacking adequate ventilation. · Do not position the monitor on unstable surfaces or unsafe locations. If the monitor
falls, it may be damaged and injure people around its vicinity. · Unplug the monitor if it will not be used for an extended period. · Do not place heavy objects on the monitor, its power cord, or any connected cable. · Do not open the back panel of the monitor as it contains a high-voltage current even
when not plugged in.
The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
COMPONENTS
A Monitor (x1)
B Stand connector (x1)
C Stand base (x1)
D 10mm M4 stand base screw (x5)
E 10mm M4 VESA screw (x4)
F Cover (x1)
G HDMI cable (x1)
H Power cable (x1)
I User guide (x1)
OVERVIEW
Front view
1 Menu button 2 Down button 3 Up button 4 Exit button 5 Power button
Press to display the OSD menu or enter sub-menus. Press to move down in the menu. Press to move up in the menu. Press to exit. Press to turn the monitor ON/OFF.
Back view
6 Audio output port 7 VGA port 8 HDMI port 9 Power port
STAND ASSEMBLY
Attention: The monitor is fragile. Keep the foam underneath the monitor while assembling the stand.
1. Open the packaging and remove the stand connector (B) and stand base (C). Using a Phillips head screwdriver (not supplied), secure the stand connector (B) to the stand base (C) with two 10mm M4 stand base screws (D).
B
D
C
2. Remove the upper foam and reveal the lower part of the monitor (A). Fix the monitor (A) to the stand connector (B) with three 10mm M4 stand base screws (D) in the marked grey holes as illustrated.
3. Place the cover (F) over the stand connector (B).
F A
B
D
VESA MOUNT
1. Open the packaging and take out the monitor (A) with the foam attached. Gently place it on a desktop or table.
2. Remove the stand connector (B), stand base (C), and foam covering the back of the monitor (A). Press the release button to remove the stand plate.
If the monitor was already attached to the stand, remove the stand.
Stand plate
B
Mount (not included)
C
Release
A button
3. Mount the monitor (A) as desired with the steps provided with your VESA mount.
Notes: · The mounting hole distance for this monitor is 75 x 75mm. · VESA mount and mounting accessories are not included.
CONNECTIVITY
Power cable
Connect one end of the power cable into the power port on the monitor. Connect the other end into a power socket.
Power cable
Earphones (Not included)
Earphones (audio out)
Earphones and other audio devices (not included) can be connected to the audio output port on the monitor. The monitor may need to be set as the PC’s default sound output device.
HDMI
Connect the HDMI cable into your input device’s display output and the monitor’s HDMI port.
HDMI cable
VGA cable (not included)
VGA OUTPUT (PC)
VGA
Connect a VGA cable (not included) into your input device’s display output and the monitor’s VGA port.
OPERATION
1. Connect the monitor to the input device via HDMI or VGA. 2. Connect one end of the power cable to the monitor, then connect the other end
directly to a power socket. Turn on the power socket. 3. Press the power button to turn the monitor on. 4. When finished use, press the power button again to turn it off.
FreeSync · To use this feature, ensure your hardware has FreeSync capabilities and the graphics drivers are fully up to date. · After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu. · See your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.
On-screen display (OSD) menu The OSD menu may be used to adjust the monitor’s settings.
Note: When using the monitor for the first time, the monitor will configure to optimal settings automatically.
1. Press the menu button to enter the OSD menu.
2. Press up and down buttons to browse the settings categories. With the desired category highlighted, press the menu button to enter the sub-menu.
3. Press the up and down buttons to browse the sub-menu. With the desired sub-menu setting highlighted, press the menu button to select the sub-menu setting.
4. Press the up and down buttons to adjust the setting. Once adjusted, press the menu button to confirm.
5. Press the exit button to return to the display.
OSD menu options Below is a list of settings that can be adjusted in the OSD menu.
Category Sub-menu
Setting
Description
Brightness 0100
Adjusts the display brightness
Contrast
0100
Adjusts the display contrast
Backlight 0100
Adjusts the display backlight
Low blue Brightness
ECO
ON/OFF
STANDARD/ TEXT/GAME/ MOVIE/FPS/RTS
Enables/disables the blue light reduction function
Sets the display’s colour balance to pre-set levels calibrated for different uses.
DCR
ON/OFF
Enables/disables the dynamic contrast ratio function
Image
Horizontal position
Vertical position
Clock
Phase
Aspect
FreeSync
0100
0100 0100 0100 Wide (16:9), 4:3 ON/OFF
Adjusts the horizontal position of the video display area (VGA only)
Adjusts the vertical position of the video display area (VGA only)
Adjusts the display clock setting
Adjusts the display phase setting
Adjusts the aspect ratio
Turns the FreeSync function on/off
Warm mode Red/green/blue
Colour
Cool mode User mode
Red/green/blue Red/green/blue
HDR mode On/Off
Language
English, , , , Español, Deutsch,
Italiano, Français,
Portugues, Turkce,
Polski, Nederlands
OSD Setting
OSD H-position
OSD V-position
0100 0100
OSD transparency
0100
OSD time out 560
Image
N/A
Colour
N/A
Reset
Reset
N/A
Misc
Timecount 1090 mins Signal source VGA/HDMI
Adjusts the red/green/blue levels Adjusts the red/green/blue levels Adjusts the red/green/blue levels Turns the HDR mode on/off.
Sets the OSD language
Adjusts the horizontal position of the OSD menu Adjusts the vertical position of the OSD menu Adjusts the transparency of the OSD menu Sets how long the OSD menu will remain on-screen after no input (seconds) Restores the display to VGA image defaults Automatically configures the VGA colour settings Restores the monitor to factory default settings Adjusts how long the time count function should be set for Adjusts the input source
ECO modes There are various pre-set colour modes suited for various use cases available on this monitor. These can be accessed using the ECO modes menu. The modes include the following:
· Standard (suitable for most activities) · Text (best suited when reading text) · Game (best suited for general gaming) · Movie (best suited when watching movies) · FPS (best suited when playing first-person shooter games) · RTS (best suited when playing real-time strategy games) GamePlus menu To access the GamePlus menu, press the exit button, followed by the menu button.
The GamePlus menu allows users to access two settings: · Crosshair Allows users to change the appearance of the crosshair used when gaming)
· Timecount Allows users to turn on a timer to record how long the monitor has been used (1090mins).
CLEANING & CARE
· To clean the screen, turn it off, unplug it, and wait for it to cool completely. Wipe it with a dry micro-fibre cloth.
· To clean the body, wipe with a clean, slightly dampened cloth.
Note: Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners.
SPECIFICATIONS
Screen size Aspect ratio Brightness Panel Resolution Refresh rate Response time Viewing angle Contrast ratio VESA mounting Colours Signal input Power supported
32″ 16:9 300cd/m² (typical) IPS 1920 x 1080 75Hz 8ms 178°(H)/178°(V) 1000:1 75 x 75mm 16.7M HDMI 1.4 x1, VGA x1 100240V, 50/60Hz, 1.1A
Audio
Speakers
No
Accessories
Power cable
Yes
HDMI cable
Yes
Additional functions
Low blue light
Yes
Flicker-free
Yes
Physical dimensions Dimensions (w. stand)
720.5 x 84.6 x 507.0mm
Dimensions (without stand) 720.5 x 42.9 x 423.1mm
Net weight
6.3kg
Gross weight
8.2kg
Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require,
head online to help.kogan.com
