Karlik Computer Sockets Instruction Manual

Computer Sockets

Product Information

The product is a set of computer sockets that come in three
different series: DECO, ICON, and MINI. The product is identified
by the symbol DGK-7, DGKBO-7, DGK-8, DGKBO-8, DGK-9, DGKBO-9,
DGK-10, DGKBO-10, DGK-11, DGKBO-11, DGK-12, DGKBO-12 IGK-7,
IGKBO-7, IGK-8, IGKBO-8, IGK-9, IGKBO-9, IGK-10, IGKBO-10, IGK-11,
IGKBO-11, IGK-12, IGKBO-12 MGK-7, MGKBO-7, MGK-8, MGKBO-8, MGK-9,
MGKBO-9, MGK-10, MGKBO-10, MGK-11, MGKBO-11, MGK-12, MGKBO-12. The
manual provides installation instructions for shielded and
unshielded RJ45 sockets as an example.

Product Usage Instructions

1. Wire Preparation:
   • Remove insulation of the outer jacket of the wire at a distance
     of 40 mm and separate the conductors at the socket.
   • If the wire is shielded, remove the aluminum foil from each
     pair of conductors and wrap the outer shield over the wire
     sheath.
2. Place the wires in the guide:
   • Insert the wire into the guide and lay out all four pairs of
     conductors by placing the individual conductor colors in the slots
     according to the layout instructions and the standard selected
     previously (see table below or color print on the guide).
   • Make sure that the colors are in the right place.
   • Trim the ends of the wires.
3. Final Assembly:
   • Press the guide to the body to align the wires laid in it with
     the slot connectors at the back of the body.
   • To connect the wires, press the body wings together until
     engaged.
   • Fix the wire tie on the body.

Note: The assembly should only be done by a suitably qualified
person with deactivated voltage and should meet national safety
standards.

ASSEMBLY MANUAL – COMPUTER SOCKETS

The manual concerns the following types of sockets:

Series DECO
ICON
MINI

Symbol of the product DGK-7, DGKBO-7, DGK-8, DGKBO-8, DGK-9, DGKBO-9, DGK-10, DGKBO-10, DGK-11, DGKBO-11, DGK-12, DGKBO-12 IGK-7, IGKBO-7, IGK-8, IGKBO-8, IGK-9, IGKBO-9, IGK-10, IGKBO-10, IGK-11, IGKBO-11, IGK-12, IGKBO-12 MGK-7, MGKBO-7, MGK-8, MGKBO-8, MGK-9, MGKBO-9, MGK-10, MGKBO-10, MGK-11, MGKBO-11, MGK-12, MGKBO-12

Installation instructions with shielded and unshielded RJ45 sockets as an example:

1. Wire preparation: – remove insulation of the outer jacket of the wire at a distance of 40 mm and separate the conductors at the socket, – if the wire is shielded, remove the aluminium foil (if any) from each pair of conductors and wrap the outer shield over the wire sheath (Photo 1).

outer wire sheath

shield (if present)

40 mm Photo no. 1

2. Place the wires in the guide: – insert the wire into the guide and lay out all four pairs of conductors by placing the individual conductor colours in the slots according to the layout instructions and the standard selected previously (see table below or colour print on the guide), – make sure that the colours are in the right place, – trim the ends of the wires (Photo 2).

0,4 mm Max.

COLOR INSTRUCTION FOR T568A OR T568B

T568A

T568B

1

white/green

2

green

3

white/orange

4

orange

white/orange orange
white/green green

5

blue

6

white/blue

7

white/brown

8

brown

blue white/blue
white/brown brown

Photo no. 2
1 I 2

ASSEMBLY MANUAL – COMPUTER SOCKETS
3. Final assembly: – press the guide to the body to align the wires laid in it with the slot connectors at the back of the body (Photo 3), – to connect the wires, press the body wings together until engaged (Photo 4), – fix the wire tie on the body (Photo 5).

Photo no. 3

Photo no. 4

cable tie Photo no.5
NOTE! Assembly shall be held by a suitably qualified person with deactivated voltage and shall meet the national safety standards.

2 I 2