W0423 Barrington 2 Light Black and Chrome Industrial Bathroom Vanity Fixture
Product Information:
This product is a fixture that requires assembly and
installation. It is designed to be mounted on an outlet box and can
accommodate a maximum 60W medium base bulb (not included). The
fixture includes a mounting plate unit (A), mounting screws (B),
wire connector (C), and bolt nuts (D). The backplate of the fixture
is attached to the mounting plate unit using the fixture mounting
screws and bolt nuts.
It is important to follow the provided instructions and consult
local electrical codes for wiring and grounding requirements before
installation. The fixture also includes a grounding screw for
proper electrical safety.
Product Usage Instructions:
- Turn off the power at the fuse or circuit box.
- Unscrew the two bolt nuts (D) and remove the mounting plate
unit (A) from the backplate. - Attach the mounting plate unit (A) to the outlet box using two
mounting screws (B). Adjust the length of the preinstalled fixture
mounting screws if necessary. Ensure that the two fixture mounting
screws are horizontally aligned to make the fixture level. - Attach the backplate of the fixture to the mounting plate unit
(A) by aligning and inserting the two fixture mounting screws into
set holes on the backplate. Secure them with two bolt nuts
(D). - Install 2 x 60W Max. medium base bulbs (not included). Check
the relamping label at the socket area or packaging for the maximum
wattage allowed. - Turn on the power at the fuse or circuit box.
If any parts are damaged or missing, they can be re-ordered
using the spare parts list:
- Assembly Kit 6586MM
- Mounting Plate Unit (A)
- Mounting Screw (B)
- Wire Connector (C)
- Bolt Nut (D)
ASSEMBLY AND INSTALLATION INSTRUCTIONS
W0423
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Mounting Plate Unit (A)
Mounting Screw (B)
Wire Connector (C)
Bolt Nut (D)
Outlet Box House Ground Wire Fixture Mounting Screw Green Ground Screw Mounting Plate Unit (A) Mounting Screw (B) Fixture Ground Wire Wire Connector (C)
Fixture Wire
Backplate Bolt Nut (D)
Fixture Shade
Max. 60W Medium Base bulb (not included)
Page 1 / 2
221025
T
Installation Steps
Turn off the power at fuse or circuit box. 1. Unscrew the two bolt nuts (D)
remove the mounting plate unit (A) from the backplate.
2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the preinstalled fixture mounting screws if necessary. Note: Make sure that two fixture mounting screws are lined up horizontally to make the fixture level.
3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows: · Connect the hot wire (black insulation) from the fixture to the black wire from the power source. · Connect the neutral wire (white insulation) from the fixture to the white wire from the power source. · Attach the fixture ground wire (bare wire) to the mounting plate unit (A) with green ground screw
then depending on local code, connect it to the house ground wire with the wire connector (C). Carefully put all of the wires back into the outlet box.
4. Attach the backplate of the fixture to the mounting plate unit (A) by aligning and inserting the two fixture mounting screws into set holes on backplate, then secure them with two bolt nuts (D).
5. Install 2 x 60W Max. medium base bulbs (not included). Check relamping label at socket area or packaging for maximum wattage allowed.
Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Assembly Kit 6586MM
Mounting Plate Unit (A)
Mounting Screw (B)
Wire Connector (C)
Bolt Nut (D)
A B
A: 9-1/2″ B: 16″ C: 8″
C
Page 2 / 2
221025
