W0416 Ogden 6.5 Inch 1-Light Matte Black Modern-Contemporary Vanity Light
Product Information
The product is a light fixture that requires assembly and
installation. It comes with a hardware package that includes a
mounting plate unit, mounting screw, wire connector, bolt nut, and
set screw. The fixture can accommodate a maximum 60W Type A / ST
bulb (not included) and features a backplate, glass shade, and
fixture wire.
Before installing the fixture, it is important to consult local
electrical codes for wiring and grounding requirements.
Additionally, to avoid the risk of electrical shock, it is
necessary to shut off power while installing or servicing the
fixture. The product comes with assembly and installation
instructions that should be read and saved for future
reference.
Product Usage Instructions
- Turn off the power at the fuse or circuit box.
- Unscrew the two bolt nuts (D) and remove the mounting plate
unit (A) from the backplate. - Attach the mounting plate unit (A) to the outlet box using two
mounting screws (B). If necessary, adjust the length of the
preinstalled fixture mounting screws. Ensure that two fixture
mounting screws are lined up horizontally to make the fixture
level. - Attach the backplate of the fixture to the mounting plate unit
(A) by aligning and inserting the two fixture mounting screws into
set holes on the backplate, then secure them with two bolt nuts
(D). - Unscrew set screws (E) from the glass holder, attach the glass
shade onto the glass holder and secure them with set screws
(E). - Install 1 x 60W max. medium base bulb (not included). Check
relamping label at socket area or packaging for maximum wattage
allowed. - Turn on the power at the fuse or circuit box.
If any of the spare parts are damaged or missing, they can be
re-ordered using the spare parts list provided. The product
dimensions are as follows: A: 10-1/4, B: 6-1/2, C: 7-3/4.
ASSEMBLY AND INSTALLATION INSTRUCTIONS
W0416
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Mounting Plate Unit (A)
Mounting Screw (B)
Wire Connector (C)
Bolt Nut (D)
Set Screw (E)
Outlet Box House Ground Wire Wire Connector (C) Fixture Mounting Screw Mounting Plate Unit (A) Mounting Screw (B) Green Ground Screw Fixture Ground Wire
Fixture Wire Bolt Nut (D) Set Screw (E)
Backplate Fixture
Glass Shade
Max. 60W Type A / ST Bulb (not included)
Page 1 / 2
220601 T
Installation Steps
Turn off the power at fuse or circuit box.
1. Unscrew the two bolt nuts (D)
remove the mounting plate unit (A) from the backplate.
2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the preinstalled fixture mounting screws if necessary. Note: Make sure that two fixture mounting screws are lined up horizontally to make the fixture level.
3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows: · Connect the hot wire (black insulation) from the fixture to the black wire from the power source. · Connect the neutral wire (white insulation) from the fixture to the white wire from the power source. · Attach the fixture ground wire (bare wire) to the mounting plate unit (A) with green ground screw
then depending on local code, connect it to the house ground wire with the wire connector (C). Carefully put all of the wires back into the outlet box.
4. Attach the backplate of the fixture to the mounting plate unit (A) by aligning and inserting the two fixture mounting screws into set holes on backplate, then secure them with two bolt nuts (D).
5. Unscrew set screws (E) from the glass holder, attach the glass shade onto the glass holder and secure them with set screws (E).
6. Install 1 x 60W max. medium base bulb (not included). Check relamping label at socket area or packaging for maximum wattage allowed.
Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Plate Unit (A) Mounting Screw (B) Wire Connector (C) Bolt Nut (D) Set Screw (E)
Assembly Kit 6513MM (1 SET)
Glass Shade 10299CS
A
B
C
Page 2 / 2
A: 10-1/4″ B: 6-1/2″ C: 7-3/4″
220601
