Hansgrohe 76200700 Finoris Bidet Mixers Instruction Manual

Hansgrohe 76200700 Finoris Bidet Mixers Instruction Manual

hansgrohe 76200700 Finoris Bidet Mixers Instruction Manual
hansgrohe 76200700 Finoris Bidet Mixers

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.

Installation Instructions

  • Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
  • The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
  • The plumbing codes applicable in the respective countries must be observed.
  • The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
  • If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.

Technical Data

This mixer series-produced with EcoSmart® (flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!

Symbol description

Symbol description Do not use silicone containing acetic acid!
Symbol description Adjustment
To adjust the hot water limiter. Using a hot water limiter in combination with a continuous flow water heater is not recommended.
Symbol description Dimensions
Symbol description Flow diagram
Symbol description Spare parts
XXX = Colors
000 = Chrome Plated
670 = Matt Black
700 = Matt White

Special accessories (order as an extra)

  • Symbol description special tool #58085000
  • Symbol description Installation putty
    Symbol description Cleaning
    Symbol description Operation
  • Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
  • After periods of prolonged non-use, but at least every third day, the fittings must be opened with the handle in hot and cold position to prevent stagnation in the connecting lines. Let the water run until the water temperature is constant.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals