TF 30 Hydraulic Table Truck

TF 30/50/50B Hydraulic Table Truck

The TF 30/50/50B Hydraulic Table Truck is a convertible vehicle
designed for lifting and transporting in workshop, warehouse, and
wharf environments. It has a load capacity of 500kgs and can lift
up to 900mm in height.

Basic Data:

Installation:

1. Install the handle (#27) on the frame seat (#12), and fix them
   by two M12 bolts.
2. Insert the foot pedal rod (#58) into the hole of the foot pedal
   holder (#54), and fix them by M8 bolt.
3. Insert the brake thread (#31) into the press bolt (#42), and
   fix them by M8 nut.

Usage:

1. Test the cart before using it. Firstly step the foot pedal rod
   to lift the table to the max height, and then release the limit oil
   valve to check whether the cart is ok.
2. Fix the cart and brake the wheel before loading.
3. Adjust the table’s height by stepping on the foot pedal to lift
   up and down to load or unload within its rated loading.
4. When lowering the table, draw up the handle of the cart.

TF 30/50/50B Hydraulic Table Truck
(Cable Release 2)

I. Use & applicable range It is a convertible vehicle using for lifting and transporting in workshop, warehouse and wharf, etc.

II. Basic Data: Model Load Capacity Lift Height Lowest Height Table Dimensions Packing Dimensions Net Weight

TF 30 300kgs 900mm 280/380mm 825×500×50mm 900×520×300/400mm 76kgs

TF 50

TF50B

500kgs

500kgs

900mm

900mm

290/385mm

295/390mm

825×500×55mm

1600×800×55mm

900×520×300/400mm 1685×830×310/410mm

84kgs

135kgs

III. Installing 1. Install the handle (#27) on the frame seat (#12), and fix them by two M12 bolts. 2. Insert the foot pedal rod (#58) into the hole of the foot pedal holder (#54), and fix them by M8 bolt. 3. Insert the brake thread (#31) into the press bolt (#42), and fix them by M8 nut.

IV. Using 1. Test the cart before using it. Firstly step the foot pedal rod to lift the table to the max height, and then release the limit oil valve to check whether the cart is ok. 2. Please fix the cart and to brake the wheel before loading. 3. Adjust the table’s height by step the foot pedal lift up and down to load or unloading in its rated loading. 4. When lower the table, draw up the handle.

V. Warning (1) Operate strictly according to the instruction manual. (2) Do not use the cart on slop. (3) Do not allow people to sit or ride on the cart. (4) Keep feet and hand away from under the lowering table. Suggest to wear safety shoes during operation. (5) Do not transport the loads during the raising process. (6) Do not random regulate the safety valve. (7) The maintenance is to be performed by the professional person (8) Failure to operate the cart will cause the damage to the person health or property loss. (9) The cart must used in the rated capacity, it is not permit to load the heavy goods that the rated capacity of
the cart.