PC020-04 Electric Table Lift
Product Overview
The PC020-04/PC060-01 Electric Table Lift is a multi-purpose
lifting tool that can lift and drive loads with two speeds: fast
and slow. The handlebar is CVT and can be adjusted according to the
height of the user. The lifting table is surrounded by foldable
guardrails, which are easy to operate and safe to use. This product
is available in lifts specially designed for decoration equipment
and orchard harvesting.
The product structure consists of three main parts: the lifting
system (consisting of scissors and forks, lifting hydraulic top
rod, loading table, etc.), starting system (consisting of motor,
differential, frame, brake, starting wheel, and universal driven
wheel, etc.), and electrical system (consisting of battery,
controller, lifting handlebar switch, and starting handlebar
switch, etc.).
Name and Illustration of Product Parts
The product diagram details the different parts of the product.
These include the lifting system, starting system, electrical
system, frame, scissors, forks, loading table, motor, differential,
brake, starting wheel, universal driven wheel, battery, controller,
lifting handlebar switch, and starting handlebar switch.
Technical Parameters
The technical parameters of the PC020-04/PC060-01 Electric Table
Lift are as follows:
- Model: PC020-04/PC060-01
- Dimensions(mm): 116
- Table Size(mm): 530~1680
- Dead Weight(Kg): 180~200
- Capacity(Kg): 500
- Table Height(mm): 500~1000
- Time of Up/Down(s): 23/20
- Speed Km/h: Quick: 5 Forward/3 Backward, Slow: 3 Forward/2
Backward - Start-up Motor: 24V/350W/80RPM
- Ejector Motor: 24V/6000N/3.5A
- Ejector Motor Force (Kg): 40/35
- Front Tyre(mm): 4.10/3.5-4
- Rear Tyre(mm): Lead Acid Battery
- Battery: 24V 24AH
- Charger: 24V 3.5A
- Charging Time (H): 6
- Tire Pressure (KPa): 180~200
Pre-Use Inspection
Before using the product, please ensure that all checks are done
to ensure your safety:
- Check the front and rear wheels to see if they are in good
condition. Check whether the tire pressure is normal or not, and if
the fixed nut is tightened. Also, check whether the wheel rotation
is flexible. - Check if the frame, scissors, and forks are intact. Check
whether the differential and hydraulic pumps are leaking. - Check if there are any abnormal sounds or smells during the
start-up of lifting and driving. - Check if the brake and brake insurance are valid.
- Check if the battery has enough charge.
- Check if lifting switch is effective.
Operating Method
The operating method for the PC020-04/PC060-01 Electric Table
Lift includes the following:
- Ensure that the pre-use inspection has been done.
- Turn on the battery and the controller.
- Press the lifting handlebar switch to lift the load.
- Press the starting handlebar switch to drive the load with
either a fast or slow speed. - Use the handlebar to control the direction of movement.
- After use, turn off the battery and controller, and store the
product in a safe and secure location.
Warning
When using the PC020-04/PC060-01 Electric Table Lift, please
note the following warnings:
- Do not exceed the maximum capacity of 500kg.
- Do not operate on slopes or uneven surfaces.
- Do not operate in wet or damp environments.
- Avoid operating near flammable or explosive materials.
- Do not modify or disassemble any part of the product.
General Troubleshooting
If you encounter any issues with the PC020-04/PC060-01 Electric
Table Lift, please refer to the general troubleshooting section of
the user manual for assistance.
Maintenance
To ensure the longevity and optimal performance of the
PC020-04/PC060-01 Electric Table Lift, please follow these
maintenance guidelines:
- Regularly clean and inspect all parts of the product for damage
or wear. - Regularly check and maintain tire pressure.
- Regularly charge the battery to ensure it has enough charge for
use. - If any part of the product is damaged or worn, replace it
immediately.
After-Sales Service
If you require any after-sales service or support for the
PC020-04/PC060-01 Electric Table Lift, please contact our customer
service department for assistance.
PC020-04/PC060-01Electric Table Lift
User’s Manual
*Thank you for choosing our electric table lift. To ensure your safe operation, please read this manual and operate according to it. *
TABLE OF CONTENTS
1. PRODUCT OVERVIEW 2. NAME AND ILLUSTRATION OF PRODUCT PARTS 3. TECHNICAL PARAMETERS 4. PRE-USE INSPECTION 5. OPERATING METHOD 6. WARNING 7. GENERAL TROUBLESHOOTING 8. MAINTENANCE 9. AFTER-SALES SERVICE
1. PRODUCT OVERVIEW
This product can not only lift the loads, but also drive the loads with two speeds: fast and slow. We also have lifts specially designed for decoration equipment and orchard harvesting. The handlebar is CVT, and also can be adjusted according to the height of the user. The lifting table is surrounded by foldable guardrail, which is easy to operate and safe to use. It is a multi-purpose lifting tool.
The product structure consists of the following parts: lifting system (consisting of scissors and forks, lifting hydraulic top rod, loading table, etc.), starting system (consisting of motor, differential, frame, brake, starting wheel and universal driven wheel etc.), electrical system (consisting of battery, controller, lifting handlebar switch and starting handlebar switch etc.). Please see the product diagram in details.
The product is designed scientifically, with reasonable structure and novel appearance. It has the characteristics of labor-saving, environmental protection, humanization and multi-purpose. The series of products produced by our company are completely self-designed and developed, which are protected by law.
Product patent number: CN2016120939051.5, CN201610725896.9, CN201620943217.0. Patented product, counterfeiting not allowed.
1
2NAME AND ILLUSTRATION OF PRODUCT PARTS 2
Circuit diagram 3
3. TECHNICAL PARAMETERS
Model Dimensions(mm) Table Size(mm)
PC020-04 1150×710×950
820×500
Dead WeightKg
116
CapacityKg
500
Table heightmm
500~1000
Time of Up/Down(s)
23/20
Speed Km/h
Quick Slow
5Forward/3 Backward 3Forward/2 Backward
Start-up Motor
24V/350W/80RPM
Ejector Motor
24V/6000N/3.5A
Ejector motor force (Kg) Front Tyre(mm)
2500 13×5.00-6
Rear Tyre(mm)
4.10/3.5-4
Lead Acid Battery
24V 24AH
Charger
24V 3.5A
Charging Time (H)
6
Tire Pressure (KPa)
180~200
PC060-01 1150×710×950
820×500 136 200
530~1680 35/30
5Forward/3 Backward 3Forward/2 Backward 24V/350W/80RPM 24V/6000N/3.5A
2500 13×5.00-6 4.10/3.5-4 24V 24AH 24V 3.5A
6 180~200
PC060-03 1630×710×1730
820×500 180 150
560~2000 40/35
5Forward/3 Backward 3Forward/2 Backward 24V/350W/80RPM 24V/6000N/3.5A
2500 13×5.00-6 4.10/3.5-4 24V 24AH 24V 3.5A
6 180~200
PC060-04 1150×710×950
820×620 180 100
600~2800 45/40
5Forward/3 Backward 3Forward/2 Backward 24V/350W/80RPM 24V/6000N/3.5A
2500 13×5.00-6 4.10/3.5-4 24V 24AH 24V 3.5A
6 180~200
4
Note: a. The frame material is made of high quality carbon steel, and the surface treatment is made of high strength anti-ultraviolet spraying. b. The above technical parameters are self-referencing according to the type of product you purchased.
4. PRE-USE INSPECTION
In order to ensure your safety, please do the following checks before use:
1. Are the front and rear wheels in good condition? Whether the tire pressure is normal or not? Is the fixed nut tightened? Wheel rotation is flexible? 2. Are the frame, scissors and forks intact? Are differential and hydraulic pumps leaking? 3. Are there any abnormal sounds or smells in the start-up of lifting and driving? 4. Are brake and brake insurance valid? 5. Is the battery enough? 6. Is lifting switch effective?
If and of the above phenomena occurs, it should be repaired before use, and It is strictly forbidden to use with malfunctions.
5
5. OPERATING METHOD a. Forward/Backward
Turn the electric lock 6 up one gear, the power display screen will display the battery power, and automatically switch on the starting motor and the lifting motor. You can start the vehicle by rolling the handlebar 5, and you also can move forward or backward by switching 20. Note: The handlebar 5 is CVT. It can be used to implement quick and slow speed of the lift. Slowly turning to the left will make the speed faster and faster. When you release the hand, the speed control handlebar 5 will automatically reset and the lift will stop. There is a speed switch 21 on the electrical box, which is on the right bottom of the lift. The user can adjust the speed according to needs. Please see specific detailed speed from technical parameter table. In order to prevent collision, the left handlebar is equipped with a brake handle 9 and a brake insurance 24. The lift can be stopped by the brake handle 9, and the lift can be fixed by a brake insurance 24. In order to save electricity, the vehicle will automatically cut off power when braking.
6
b. Up/Down
When the lock switch 6 is turned on, there are two lifting buttons 7 on the left handlebar. If the “up” button is pressed, the lifting table will rise. If the “down” button is pressed, the lifting table will go down and the lifting table will stop when the button is loosened. Note: This product has a lift controller 13. When overloaded or stuck, the controller will automatically alarm, that is, the lift will stop working after the red light warns 6 times with buzzing sound “beep, beep, beep”. When the alarm is on, the electric lock 6 should be turned off immediately, and then the electric lock 6 can be restored.
c. Charging battery
In order to use safely and longer, the battery should be charged immediately after use. Even if the lift is not used for a long time, the battery must be fully charged every two-month, otherwise it will affect the life of the battery.
7
6. WARNING
Operating forklift is not only a technical work, but also a dangerous work. Please read this manual carefully before using it. Correct operation is the only way to ensure safe use. There will be hidden dangers of injury or even death if operate the lift incorrectly. In order to ensure your safety, please do the following checks before use: a. It is strictly forbidden to lend forklift to some people are not trained or authorized, especially minors! b. It is strictly forbidden to operate on unstable and uneven grounds. It is strictly forbidden to lift goods on slopes and slippery roads c. It is strictly forbidden to lift and load of rolling goods. The cargo shelves loaded must be solid and reliable to prevent cargo from falling off and cause injury. d. The goods must be stored in the center of the lifting table to prevent the lift or the goods from overturning. e. It is strictly forbidden to load super high, super wide and super heavy. It is strictly forbidden to lift the goods very high. f. Inconsistent air pressure between left and right tires can easily lead to overturning, and excessive air pressure can lead to tire explosion and overturning. g. Stop operation immediately when abnormal sounds, or abnormal smells are found. h. It is strictly forbidden for any part of the body to enter the lifting area. It is strictly forbidden to load inflammable, explosive and other dangerous goods! i. No malfunction! Refitting or altering the structure is strictly prohibited! j. It is strictly forbidden to use or charge or discharge in flammable and explosive environment. k. It is strictly forbidden to wash electrical box and battery with high-pressure water guns! Especially the lifting controller and starting controller!
8
7. GENERAL TROUBLESHOOTING
Fault Phenomena
Exclusion Methods
Turn on the power switch, but the lift doesn’t work.
Only forward or backward. Or start forward but go backward. Or start backward but go forward.
Strange sounds in the ascent and descent.
a. The brake insurance24 on the left handlebar is locked. If the brake insurance24 is loose, the power will be restored. b. Switch connector is loose. Just unplug the connector and reconnect it. c. Wire ruptured or switch damaged, repair wire or replace switch.
a. Switch2 is not in good contact or damaged, repair or replace the switch. b. When forward and backward misalignment occurs, open the startup box11, insert the two spare connectors on the controller for 5 seconds, then unplug them, and the program will automatically reset. If it still doesn’t work, the forward/backward switch2 needs to be replaced.
a. Deformation of guide rail, stuck by hard trash, aging of slide bearing, or lack of oil. b. Adjust guide rail, remove hard trash, replace bearing or add rail oil.
9
Lift controller light turns to red with “beep” buzzing sound, and lifting function fails.
Only can go up and down with an empty table.
Motor works, but wheels do not rotate.
Only can go forward or backward, but cannot go up or down.
a. Overload or stuck alarm, automatic protection: b. Turn off the electric lock, unload the overloaded goods and reopen the electric lock. c. The upper and lower guide rails are stuck. Turn off the electric locks to clean up or remove trashes in the rails, and ensure that the upper and lower pulleys and the rotating axles slide easily, and reopen the electric locks to restart the lifting function.
a. Battery power is insufficient and needs to be charged. b. Hydraulic pump connector is loose, so please re-connected. c. Hydraulic oil is insufficient or the motor of the hydraulic pump is burnt out. Replenish the hydraulic oil L-HM46A or replace the hydraulic pump.
The gear handlebar28 is not closed or the clutch26 adjusting bolt is not adjusted properly. Push the gear handlebar28 down and then pull it up to close the gear handlebar28. If the wheels still do not rotate, adjust the clutch26 to connecting state.
a. Maybe the lock switch is turned off. The key of the lock can be rotated to the third gear to go up and down. b. If the connector of lifting line is loose or the switch is damaged, re-unplug and re-insert the corresponding connectors. If it still doesn’t work, it is necessary to replace the lifting switch.
10
8. MAINTENANCE
In order to ensure your safe operation, do a daily maintenance to keep the lift always in the best status. Please do the following maintenance: a. To check status before use. b. To check the bolts and nuts regularly. If they are loose, tighten them in time. c. To refill oil for all guide rails and movable joints regularly. If the hydraulic push rod is lack of oil, Please add anti-wear hydraulic oil L-HM46A. d. To clean the vehicle regularly, and to check carefully and repair if the key parts are missing, deformed or broken. e. To charge the battery in time after use, in order to prolong the battery life. Note: Both lead-acid and lithium batteries must be charged every 2 months, otherwise the life of batteries will be affected.
9. AFTER-SALES SERVICE
In order to safeguard your legitimate rights and interests, please properly preserve the “warranty card” and purchase receipt. A. Warranty including: a. When you buy this product, it should be inspected on the spot, and have the right to ask the salesperson to teach the correct method of use, precautions and maintenance, and to require the “warranty card” and the purchase receipt.
11
b. Please read the user manual carefully and operate it correctly. For example, due to the production quality of the product, the distributor can be directly sought for compensation. The factory also will repair or replace new parts for you in time , but the users should pay all the losses and expenses caused by improper use. c. During the warranty, and under the correct operation, fracture of frame, surface paint peeling, failure of electrical appliances, aging of bearings and wheels will be replaced free within two years. d. Battery shell cracking, leakage or rapid capacity decay, is responsible for replacement within one year (12 months from the date of purchase of the product). e. Artificial damage is not within the scope of replacement.
B. Warrant not including: a. Accidents or damages caused by users do not follow the user manual. b. Accidents or damages caused by self-disassembling or self-remodeling. c. Accidents or damages caused by improper operation. d. Loss of warranty card or receipt. e. Accidents or damages caused by self-repairing. f. Accidents or damages caused by force majeure, such as fires, earthquakes, floods, typhoons, etc.
C. Others a. Not free service after warranty. b. Due to the continuous improvement and updating of factory products, the parameters of all models are based on the actual model parameters. If the parameters are changed, no further notice.
12
