DESK-M43TB Black 43 x 24 Inch Manual Height Adjustable Desk
Product Information
The Black 43 x 24 Manual Height Adjustable Desk is a sturdy and
versatile desk that allows you to adjust the height of your
workspace to suit your needs. The desk has a weight capacity of
88lbs (40kg) and comes with all the necessary parts for assembly,
including two lifting columns, a lower crossbar, two side brackets,
a desktop, screws, a sync rod, an upper crossbar, a crank, silicone
pads, and an Allen wrench. The desk also features foot pads that
can be adjusted to ensure that the desk is level.
Product Usage Instructions
- Attach Side Brackets (B) to Lifting Columns (A) using M6x30mm
Screws (S-D). - Stand up Lifting Columns (A) and insert Sync Rod (C) into the
socket on each column. Use Crank (G) to align columns if
needed. - Assemble Upper Crossbar (D) to the top of the columns using the
M5x60mm Screws (S-C) and the Lower Crossbar (E) to the back using
M6x12mm Screws (S-A). Tighten all screws using the Allen Wrench
(S-G). - Apply Silicone Pads (S-E) to the top of the assembled frame as
shown. - Place Desktop (F) on top of assembled frame. Secure using the
M6x35mm Screws (S-B) with M6 Washers (S-E), and tighten with a
Phillips screwdriver. - Insert Crank (G) into the hex socket of Lifting Column
(A). - Turn the crank to raise or lower the desk.
- Store the crank in the rear of the Side Bracket (B) when not in
use. - Turn the foot pads to adjust the desk level.
- Use a bubble level to ensure the desk is sitting perfectly
level. - Do not exceed desk weight limit.
- Keep area of vertical motion free of obstacles.
- Keep weight on desk balanced for correct operation and longer
life of components. - Leave enough slack in cables to allow for full range of
vertical motion.
It is important to follow these instructions carefully to ensure
that the desk is assembled correctly and operates safely. If any
parts are received damaged or defective, please contact VIVO’s
dedicated support team for immediate assistance.
Black 43″ x 24″ Manual Height Adjustable Desk
Instruction Manual
SKU: DESK-M43TB
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-m43tb GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x2) Lifting Column
E (x1) Lower Crossbar
B (x2) Side Bracket
F (x1) Desktop
S-B (x6) M6x35mm
Screws
S-C (x4) M5x60mm
Screws
C (x1) Sync Rod
D (x1) Upper Crossbar
G (x1) Crank
S-D (x4) M6x30mm
Screws
S-A (x4) M6x12mm
Screws
S-E (x8) Silicone Pad
S-F (x6) M6 Washer
S-G (x1) Allen Wrench
TOOLS NEEDED
Phillips Screwdriver
Tape Measure
Level
Drill
DO NOT EXCEED WEIGHT CAPACITY.
88lbs
Failure to do so may result in serious injury.
(40kg)
2
ASSEMBLY STEPS
STEP 1
Attach Side Brackets (B) to Lifting Columns (A) using M6x30mm Screws (S-D). Stand up Lifting Columns (A) and insert Sync Rod (C) into the socket on each column. Use Crank (G) to align columns if needed.
B
3
STEP 2
Assemble Upper Crossbar (D) to the top of the columns using the M5x60mm Screws (S-C) and the Lower Crossbar (E) to the back using M6x12mm Screws (S-A). Tighten all screws using the Allen Wrench (S-G).
4
STEP 3
Apply Silicone Pads (S-E) to the top of the assembled frame as shown.
5
STEP 4
Place Desktop (F) on top of assembled frame. Secure using the M6x35mm Screws (S-B) with M6 Washers (S-E), and tighten with a Phillips screwdriver.
6
STEP 5
Insert Crank (G) into the hex socket of Lifting Column (A)
Figure 1: Turn the crank to raise or lower the desk. Figure 2: Store the crank in the rear of the Side Bracket (B) as shown. Figure 3: Turn the foot pads to adjust the desk level. Figure 4: Use a bubble level to ensure the desk is sitting perfectly level.
G
A B
CAUTION!
Do not exceed desk weight limit.
Keep area of vertical motion free of obstacles.
Keep weight on desk balanced for correct operation and longer life of components.
Leave enough slack in cables to allow for full range of vertical motion.
Failure to follow these instructions may result in property damage and/or personal injury.
7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 08/18/2022 REV1.1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
43" x 24" Manual Height Adjustable Desk – VIVO - desk solutions, screen mounting, and more
