MIX 10/25
Assembly Instructions
Mix 10/25 Nilfisk FOOD Pre Diluted Mix Stations Mix Detergents
When leaving Nilfisk FOOD, the unit is packed like this.
Dosing pump and ball valve on the inlet side are dismounted and packed in a separate box to optimise the shipping.
Dosing pump and ball valve must be mounted in the holder (just slip them into the groove).
Insert the supplied gasket, which is located in the small plastic bag on the hose, between the dosing pump and the plastic union. The union is tightened by hand.
The plug for the solenoid valve on the inlet side must be mounted.
The unit is now ready to be installed.
