PRAFRX513CH Single-Handle 6-Spray Tub and Shower Faucet
Product Information:
| No. | Description |
|---|---|
| A | Shower arm and flange kit |
| B | Shower head |
| C | Pressure balanced diverter valve |
| C-1 | Valve Face plate with seal joint |
| C-2 | Diverter knob kit |
| C-3 | Trim cap (included) |
| C-4 | Allen screw (included) |
| C-5 | Bathtub spout |
Product Care Instructions:
- We recommend using a professional plumber for all installation
and repair. - Please inform yourself about the Canadian plumbing code’s
regulations and your local municipality plumbing codes before
installation. - The Canadian plumbing code requires the installation of surge
arresting devices to eliminate water hammering. - Allow an adequate opening in order to easily access connections
or other plumbing devices for maintenance or repair.
Recommended Tools:
- Plumber’s putty
- Thread seal tape (included)
Connection Advice:
Firmly hand tighten the hose to the valve and add a quarter turn
using the proper wrench. Tighten more if needed.
Product Usage Instructions:
Before You Begin:
Make sure you have the necessary tools and materials ready
before starting the installation process.
Installation Steps:
Step 1: Copper Connection
Follow the drilling guide to create openings for the copper
connections.
Step 2: Head Shower Installation
- Connect the hot water pipe to the hot water inlet on the
pressure balanced diverter valve. - Connect the cold water pipe to the cold water inlet on the
pressure balanced diverter valve. - Connect the shower head to the top outlet of the pressure
balanced diverter valve.
Step 3: Bathtub Spout Installation
Connect the bathtub spout to the bottom outlet of the pressure
balanced diverter valve.
Note: When using a hand shower, it needs to be
connected to the top outlet of the pressure balanced diverter
valve.
PRODUCT DRAWING
Finished Wall mur fini
Turn on Hot Cold Off Off Turn on
IB_KIT-QUA130CMB.indd 1
A B
No. Description
A B C C-1 C-2 C-3 C-4 C-5 D
Shower arm and flange kitShower head Pressure balanced diverter valve Valve Face plate with sealjoint Diverter knob kit Trim cap (C-3 included) Allen screw (C-3 included) Bathtub spout
SHOWER SYSTEM FAUCET
Installation instruction
C3
C
C1
C5
C2
C4
D
MB/BN/BG/CH/ORB CARE INSTRUCTIONS DO NOT:
We recommends using a professional plumber for all installtion and repair. Please inform yourself about the canadian plumbing code`s regulations and your local municipality plumbing codes before instaillation.the canadian plumbing code requires the installation of urge arresting devices to eliminate water hammering.allow an adequate opening in orderto easilyaccess connections or other plumbing devicesfor maintenance or repair.
Plumber’s putty
RECOMMENDED TOOLS
Thread seal tape
Included
* Apply plumber’s putty under the plastic cover deck plcta to seal your installation.
The model shown in the installation steps may differ from the one in box however connection type and installation steps are the same.
CONNECTION ADVICE
Firmly hand tighten the hose to the valve and add a quarter
turn using the proper wrench Tighten more if needed
BEFORE YOU BEGIN
INSTALLATION STEPS INSTALLATION WAY
2
3
HEAD SHOWER
HOT
HOT WATER
COLD WATER
4 3
COLD
BATHTUB SPOUT
COPPER
1
ATTENTION
1
WHEN USING A HANDSHOWER,
IT NEEDS TO BE CONNECTED
TO THE TOP OUTLET
DRILLING GUIDE
2 COPPER
4
5
HEAD SHOWER
6
BATHTUB SPOUT
7
