PRAARX503CH Single-Handle 6-Spray Shower Faucet with 6 Inch High Pressure Rain Shower Head in Chrome
Product Information: – Product Name: Shower System Faucet –
Model: Kit-QUA130CMB – Components: – A-1: Pressure balanced
diverter valve – A-2: Face plate with seal joint – A-3: Diverter
knob kit – A-4: Trim cap – A-5: Allen screw – B: Shower head – C:
Shower arm and flange kit Product Usage Instructions: 1.
Before starting the installation, it is recommended to read and
familiarize yourself with the Canadian plumbing code regulations
and your local municipality plumbing codes. 2. We recommend using a
professional plumber for both installation and repair. 3. Ensure
that urge arresting devices are installed to eliminate water
hammering, as required by the Canadian plumbing code. 4. Create an
adequate opening to easily access connections or other plumbing
devices for maintenance or repair. 5. Recommended tools for
installation: – Plumber’s putty – Thread seal tape (included) –
Proper wrench Installation Steps: 1. Apply plumber’s putty
under the plastic cover deck plate to seal your installation. 2.
Firmly hand tighten the hose to the valve. 3. Use a proper wrench
to add a quarter turn to tighten the hose more if needed. 4.
Connect the shower head to the top outlet when using a handheld
shower. 5. Follow the drilling guide to create necessary holes for
installation. 6. Connect the copper pipes according to the
installation way shown in the diagram. 7. Connect the hot and cold
water supply to the appropriate valves. Please note that while the
model shown in the installation steps may differ from the one in
the box, the connection type and installation steps remain the
same.
PRODUCT DRAWING
Finished Wall mur fini
C B
No. Description
A
Pressure balanced diverter valve
A-1
Valve
A-2
Face plate with sealjoint
A-3
Diverter knob kit
A-4
Trim cap
A-5
Allen screw
B
Shower head
C
Shower arm and flange kit
SHOWER SYSTEM FAUCET
Installation instruction
IB_KIT-QUA130CMB.indd 1
A3
A
A1
A5
A2
A4
MB/BN/BG/CH/ORB CARE INSTRUCTIONS DO NOT:
We recommends using a professional plumber for all installtion and repair. Please inform yourself about the canadian plumbing code`s regulations and your local municipality plumbing codes before instaillation.the canadian plumbing code requires the installation of urge arresting devices to eliminate water hammering.allow an adequate opening in orderto easilyaccess connections or other plumbing devicesfor maintenance or repair.
Plumber’s putty
RECOMMENDED TOOLS
Thread seal tape
Included
* Apply plumber’s putty under the plastic cover deck plcta to seal your installation.
The model shown in the installation steps may differ from the one in box however connection type and installation steps are the same.
CONNECTION ADVICE
Firmly hand tighten the hose to the valve and add a quarter
turn using the proper wrench Tighten more if needed
BEFORE YOU BEGIN
INSTALLATION STEPS INSTALLATION WAY
2
3
HEAD SHOWER
HOT
HOT WATER
COLD WATER
4 3
COLD
COPPER
1
ATTENTION
1
WHEN USING A HANDSHOWER,
IT NEEDS TO BE CONNECTED
TO THE TOP OUTLET
DRILLING GUIDE
2 COPPER
4
5
6
7
