PRAARX395BG Bathroom Faucet
Product Information: Product Name: Bathroom Faucet Model:
MB/BN/BG/CH/ORB Installation: Refer to installation instructions
for detailed steps. Product Usage Instructions: 1. Before
beginning the installation, make sure to gather all the necessary
tools and materials. 2. Start by preparing the sink or countertop
where you will be installing the faucet. Clean the surface and
ensure it is dry. 3. Apply plumber’s putty around the base of the
faucet where it will come in contact with the sink or countertop.
This will help create a watertight seal. 4. Place the faucet onto
the sink or countertop, aligning it properly. 5. Secure the faucet
in place by tightening the mounting nuts underneath the sink or
countertop. Use a wrench or pliers to ensure a tight fit, but be
careful not to overtighten and damage the faucet or sink. 6.
Connect the water supply lines to the corresponding hot and cold
water valves. Use thread seal tape to ensure a proper seal. 7. Turn
on the water supply and check for any leaks. If you notice any
leaks, tighten the connections further or replace any faulty parts.
8. Once the faucet is securely installed and there are no leaks,
you can test its functionality by turning on the water and
adjusting the temperature and flow using the handles or knobs
provided. Care Instructions: – Rinse the product with clear
water after each use to remove any soap or residue. – Dry the
product thoroughly with a soft cloth to prevent water spots or
stains. – Do not use abrasive cleansers, cloths, or paper towels as
they can scratch or damage the faucet’s finish. – Avoid using
cleaning agents that contain acid, polish, wax, alcohol, ammonia,
bleach, solvent, or any other corrosive or harsh chemicals as they
can also damage the faucet’s finish. – Regularly inspect the faucet
for any signs of wear or damage. If you notice any issues, contact
the manufacturer or a professional plumber for assistance. Note:
The recommended tools for installation include plumber’s putty and
thread seal tape, which are included with the product.
BATHROOM FAUCET
Installation instruction
MB/BN/BG/CH/ORB
PRODUCT DRAWING
CARE INSTRUCTIONS
Rinse the product with clear water. Dry the product with a soft cloth.
DO NOT:
Use abrasive cleansers, cloths, or paper towels. Use any cleaning agents containing acid, polish, wax, alcohol, ammonia, bleach,
solvent or any other corrosive or harsh cheminalc cleansers.
RECOMMENDED TOOLS
Plumber’s putty
Thread seal tape
Included
INSTALLATION STEPS
BEFORE YOU BEGIN
1
2
3
4
5
