PRAARX503BN Single Handle 6 Spray Shower Faucet
Product Information
This product is a shower system faucet that includes a pressure
balanced diverter valve, a shower head, and a shower arm and flange
kit. The components of the product are described as follows:
| No. | Description |
|---|---|
| A-1 | Valve |
| A-2 | Face plate with sealjoint |
| A-3 | Diverter knob kit |
| A-4 | Trim cap |
| A-5 | Allen screw |
| B | Shower head |
| C | Shower arm and flange kit |
The product is available in multiple finishes: MB (Matte Black),
BN (Brushed Nickel), BG (Brushed Gold), CH (Chrome), and ORB (Oil
Rubbed Bronze).
The installation of this shower system faucet should be done by
a professional plumber. It is important to familiarize yourself
with the Canadian plumbing code’s regulations and your local
municipality plumbing codes before installation. The Canadian
plumbing code requires the installation of surge arresting devices
to eliminate water hammering.
Plumber’s putty and thread seal tape are recommended tools for
the installation. Plumber’s putty should be applied under the
plastic cover deck plate to seal the installation.
The model shown in the installation steps may differ from the
one in the box, but the connection type and installation steps are
the same.
Product Usage Instructions
- Before you begin the installation, make sure you have all the
necessary tools and materials. - Follow the installation steps provided in the installation
guide. - For connecting the handshower, it needs to be connected to the
top outlet. - Refer to the drilling guide for proper placement of holes for
installation. - Firmly hand tighten the hose to the valve and then add a
quarter turn using the proper wrench. Tighten more if needed.
PRODUCT DRAWING
Finished Wall mur fini
C B
No. Description
A
Pressure balanced diverter valve
A-1
Valve
A-2
Face plate with sealjoint
A-3
Diverter knob kit
A-4
Trim cap
A-5
Allen screw
B
Shower head
C
Shower arm and flange kit
SHOWER SYSTEM FAUCET
Installation instruction
IB_KIT-QUA130CMB.indd 1
A3
A
A1
A5
A2
A4
MB/BN/BG/CH/ORB CARE INSTRUCTIONS DO NOT:
We recommends using a professional plumber for all installtion and repair. Please inform yourself about the canadian plumbing code`s regulations and your local municipality plumbing codes before instaillation.the canadian plumbing code requires the installation of urge arresting devices to eliminate water hammering.allow an adequate opening in orderto easilyaccess connections or other plumbing devicesfor maintenance or repair.
Plumber’s putty
RECOMMENDED TOOLS
Thread seal tape
Included
* Apply plumber’s putty under the plastic cover deck plcta to seal your installation.
The model shown in the installation steps may differ from the one in box however connection type and installation steps are the same.
CONNECTION ADVICE
Firmly hand tighten the hose to the valve and add a quarter
turn using the proper wrench Tighten more if needed
BEFORE YOU BEGIN
INSTALLATION STEPS INSTALLATION WAY
2
3
HEAD SHOWER
HOT
HOT WATER
COLD WATER
4 3
COLD
COPPER
1
ATTENTION
1
WHEN USING A HANDSHOWER,
IT NEEDS TO BE CONNECTED
TO THE TOP OUTLET
DRILLING GUIDE
2 COPPER
4
5
6
7
