Mean Well Apv-12 Series 12w Single Output Switching Power Supply Owner's Manual (+ PDF)

Home » Blog » Mean Well Apv-12 Series 12w Single Output Switching Power Supply Owner's Manual

Contents hide

1 APV-12 Series 12W Single Output Switching Power Supply

2 Product Information

2.1 Specifications:

3 Product Usage Instructions

4 Documents / Resources

4.1 References

APV-12 Series 12W Single Output Switching Power Supply

Product Information

The APV-12 series is a 12W single output switching power supply.
It is designed to provide DC voltage output with various current
and voltage options. The power supply is compliant with safety
standards UL8750, CSA C22.2 No.250.0-08, BIS IS15885 (except for
15V), EAC TP TC 004, IP42, and BS EN/EN 62368-1.

Specifications:

Model: APV-12-5
Output:
- DC Voltage: 5V
- Rated Current: 2A
- Current Range: 0 ~ 2A
- Rated Power: 10W
- Ripple & Noise (max.): 100mVp-p
- Line Regulation
- Load Regulation
- Setup, Rise Time: 1500ms, 30ms / 230VAC; 1500ms, 30ms / 115VAC
  at full load
- Hold Up Time (Typ.): 20ms/230VAC, 15ms/115VAC at full load
- Voltage Range: 90 ~ 264VAC, 127 ~ 370VDC
- Frequency Range: 47 ~ 63Hz
- Efficiency (Typ.): 76%
- AC Current: 0.2A/230VAC, 0.35A/115VAC
- Inrush Current (Typ.): Cold Start 70A (twidth=185s measured at
  50% Ipeak) at 230VAC
- Max. No. of PSUs on 16A Circuit Breaker Leakage Current: 17
  units (circuit breaker of type B) / 29 units (circuit breaker of
  type C) at 230VAC; 0.25mA / 240VAC
- Over Load Protection: Above 105% rated output power, Protection
  type: Hiccup mode, recovers automatically after fault condition is
  removed
- Over Voltage: 5.75 ~ 6.75V
- Working Temperature: -30 ~ +70 (Refer to Derating Curve)
- Working Humidity: 20 ~ 90% RH non-condensing
- Environment Storage Temp., Humidity: -40 ~ +80, 10 ~ 95%
  RH
- Temp. Coefficient Vibration: 10 ~ 500Hz, 2G 10min./1cycle,
  period for 60min. each along X, Y, Z axes
- Safety Standards: UL8750, CSA C22.2 No.250.0-08, BIS IS15885
  (except for 15V), EAC TP TC 004, IP42, BS EN/EN 62368-1
  approved
- Safety & Withstand Voltage EMC: I/P-O/P:3.75KVAC,
  I/P-O/P:>100M Ohms / 500VDC / 25/70% RH, Compliance to BS
  EN/EN55032, BS EN/EN61000-3-2, BS EN/EN61000-3-3, EAC TP TC
  020
- EMC Immunity: Compliance to BS EN/EN55035, BS EN/EN61000-4-2,
  3, 4, 5, 6, 8, 11; light industry level (surge 2KV), EAC TP TC
  020
- MTBF: 7488.9K hrs min. Telcordia SR-332 (Bellcore); 1132.5K hrs
  min. MIL-HDBK-217F (25)
- Dimension: 77*40*29 (L*W*H)
- Packing: 0.08Kg; 120pcs/11.8Kg/1.06CUFT
- Note: All parameters NOT specially mentioned are measured at
  230VAC input, rated load and 25°C of ambient temperature. Ripple
  & noise are measured at 20MHz of bandwidth by using a 12
  twisted pair-wire terminated with a 0.1uf & 47uf parallel
  capacitor. Tolerance includes set up tolerance, line regulation,
  and load regulation. Derating may be needed under low input
  voltage. Please check the static characteristics for more
  details.
- Please connect L line to the positive pole and N line to the
  negative pole under DC input.
- The power supply is considered as a component that will be
  operated in combination with final equipment. Since EMC performance
  will be affected by the complete installation, the final equipment
  manufacturers must re-qualify EMC Directive on the complete
  installation again.
- Length of set up time is measured at first cold start. Turning
  ON/OFF the power supply may lead to an increase in the set up
  time.
- This product is not intended for LED lighting luminaire
  applications in the EU. (In the EU, the LPF/NPF/XLG series are
  recommended.)

Product Usage Instructions

To use the APV-12 series single output switching power supply,
follow these steps:

Ensure that the input voltage is within the range of 90 ~
264VAC or 127 ~ 370VDC and the frequency is between 47 ~ 63Hz.
Connect the L line to the positive pole and the N line to the
negative pole under DC input.
Select the desired output voltage according to your
requirements:

For APV-12-5: Set the output voltage to 5V.
For APV-12-12: Set the output voltage to 12V.
For APV-12-15: Set the output voltage to 15V.

Connect your device or equipment to the power supply’s output
terminals.

Ensure that the load does not exceed the rated current for each
model:

For APV-12-5: The rated current is 2A with a current range of 0
~ 2A.
For APV-12-12: The rated current is 1A with a current range of
0 ~ 1A.
For APV-12-15: The rated current is 0.8A with a current range
of 0 ~ 0.8A.

Ensure that the working temperature is within the range of
-30°C to +70°C. Refer to the Derating Curve for more details.

Make sure the working humidity is between 20% and 90% RH
non-condensing.

Observe the safety standards and isolation resistance for
proper operation and compliance.

View Fullscreen

12W Single Output Switching Power Supply

APV-12 series

SPECIFICATION
MODEL

APV-12-5

User’s Manual

IS 15885(Part 2/Sec13)

LPS IP42

THOMAS SAMUEL

R-41027766

APV-12-12

APV-12-15

APV-12-24

OUTPUT

DC VOLTAGE

12V

15V

RATED CURRENT

0.8A

CURRENT RANGE

0 ~ 2A

0 ~ 1A

0 ~ 0.8A

RATED POWER

10W

12W

RIPPLE & NOISE (max.) Note.2 100mVp-p

120mVp-p

VOLTAGE TOLERANCE Note.3 ±5.0%

LINE REGULATION

±1.0%

LOAD REGULATION

±2.0%

SETUP, RISE TIME Note.6 1500ms, 30ms / 230VAC

1500ms,30ms / 115VAC at full load

HOLD UP TIME (Typ.)

20ms/230VAC 15ms/115VAC at full load

24V 0.5A 0 ~ 0.5A 12W 150mVp-p

VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC

FREQUENCY RANGE

47 ~ 63Hz

INPUT

EFFICIENCY (Typ.)

76%

82%

84%

AC CURRENT

0.2A/230VAC 0.35A/115VAC

INRUSH CURRENT(Typ.)

COLD START 70A(twidth=185s measured at 50% Ipeak) at 230VAC

MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT

17 units (circuit breaker of type B) / 29 units (circuit breaker of type C) at 230VAC 0.25mA / 240VAC

OVER LOAD PROTECTION
OVER VOLTAGE
WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION

Above 105% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

5.75 ~ 6.75V

13.8 ~ 16V

17.5 ~ 21V

Protection type : Shut off o/p voltage, clamping by zener diode

-30 ~ +70(Refer to “Derating Curve”)

20 ~ 90% RH non-condensing

-40 ~ +80, 10 ~ 95% RH

±0.03%/ (0 ~ 50)

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

27.6 ~ 32.4V

SAFETY STANDARDS Note.8

UL8750,CSA C22.2 No.250.0-08, BIS IS15885(except for 15V),EAC TP TC 004,IP42, BS EN/EN 62368-1 approved

SAFETY & WITHSTAND VOLTAGE

EMC

ISOLATION RESISTANCE

EMC EMISSION

I/P-O/P:3.75KVAC I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032,BS EN/EN61000-3-2,BS EN/EN61000-3-3, EAC TP TC 020

EMC IMMUNITY

Compliance to BS EN/EN55035,BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), EAC TP TC 020

MTBF

7488.9K hrs min. Telcordia SR-332 (Bellcore) ; 1132.5K hrs min. MIL-HDBK-217F (25)

OTHERS DIMENSION

77*40*29(L*W*H)

PACKING

0.08Kg; 120pcs/11.8Kg/1.06CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltage. Please check the static characteristics for more details. Please connect L line to the positive pole and

N line to the negative pole under DC input.

5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

7. This product is not intended for LED lighting luminaire applications in the EU.(In the EU the LPF/NPF/XLG series are recommended.)

8. The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model . Please contact MEAN WELL for details.

9. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft).

10. Products sourced from the Americas regions may not have the ENEC/BIS/CCC logo. Please contact your MEAN WELL sales for more information.

11. For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

Downloaded from Arrow.coPmro.duct Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:APV-12-SPEC 2023-04-14

12W Single Output Switching Power Supply
Mechanical Specification
90 82.5 77

AC/N(Blue) AC/L(Brown)

UL1569 18AWG 150±10

31 T case
T case: Max. Case Temperature

APV-12 series
Unit:mm

150±10 UL1569 20AWG

+V(Red) -V(Black)

40 15.5
19 29

Block Diagram

I/P

EMI FILTER

RECTIFIERS