Mean Well Lpv-150-12 150w Single Output Switching Power Supply Instruction Manual

LPV-150-12 150W Single Output Switching Power Supply

Product Information

Product Usage Instructions

To use the LPV-150 series single output switching power supply,
follow these instructions:

1. Ensure that the input voltage is within the specified range of
   180 ~ 305VAC or 254 ~ 431VDC.
2. Connect the power supply to the desired load using appropriate
   wiring.
3. Make sure the load does not exceed the rated current for the
   specific model of LPV-150 power supply.
4. Turn on the input power source.
5. The power supply will provide a stable DC voltage output
   according to the selected model.
6. Monitor the load and ensure it remains within the specified
   range to prevent overload.
7. If an overload occurs, the power supply will enter hiccup mode
   and automatically recover once the fault condition is removed.
8. In case of an overvoltage or over-temperature condition, the
   power supply will shut down the output voltage. Once the condition
   is resolved, the power supply will automatically recover.
9. Ensure that the working temperature is within the range of
   -25°C to +65°C. Refer to the derating curve for temperature
   adjustment guidelines.
10. Keep the power supply in a well-ventilated environment with a
    working humidity range of 20% to 90% RH non-condensing.
11. Store the power supply in a dry and cool place with a
    temperature range of -40°C to +80°C and a humidity range of 10% to
    95% RH.

150W Single Output Switching Power Supply

LPV-150 series
User’s Manual

IP67

IS 15885(Part 2/Sec13)

THOMAS SAMUEL

THOMAS SAMUEL

R-41027766 (for LPV-150-12,24 only)

File Name:LPV,LPVL-150-SPEC 2023-04-14

Downloaded from Arrow.com.

150W Single Output Switching Power Supply

LPV-150 series

SPECIFICATION

MODEL

LPV -150-12

LPV-150-15

LPV -150-24

LPV-150-36

DC VOLTAGE

12V

15V

24V

36V

RATED CURRENT CURRENT RANGE

10A 0 ~ 10A

8A 0 ~ 8A

6.3A 0 ~ 6.3A

4.2A 0 ~ 4.2A

RATED POWER

120W

120W

151.2W

151.2W

OUTPUT

RIPPLE & NOISE (max.) Note.2 200mVp-p VOLTAGE TOLERANCE Note.3 ±5.0%

200mVp-p

200mVp-p

200mVp-p

LINE REGULATION LOAD REGULATION

±1.0% ±2.0%

SETUP, RISE TIME Note.6 LPV-150: 500ms, 50ms / 230VAC 500ms, 50ms / 277VAC;

LPVL-150: 1500ms, 50ms / 115VAC

HOLD UP TIME (Typ.)

LPV-150: 18ms/230VAC 20ms/277VAC at full load;

LPVL-150: 10ms/115VAC at full load

VOLTAGE RANGE Note.4 LPV-150: 180 ~ 305VAC 254 ~ 431VDC;

LPVL-150: 90~132VAC

FREQUENCY RANGE

47 ~ 63Hz

EFFICIENCY (Typ.)

87%

88%

89%

89%

INPUT

AC CURRENT

LPV-150: 1.7A/230VAC 1.5A/277VAC;

LPVL-150: 3.0A/115VAC

INRUSH CURRENT Blank type COLD START 60A(twidth=900s measured at 50% Ipeak) at 230VAC

(Typ.)

L type COLD START 75A(twidth=900s measured at 50% Ipeak) at 115VAC

LPV-150-48 48V 3.2A 0 ~ 3.2A 153.6W 200mVp-p
90%

MAX. No. of PSUs Blank type

on 16A CIRCUIT

BREAKER

L type

2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC 1 units (circuit breaker of type B) / 2 units (circuit breaker of type C) at 115VAC

LEAKAGE CURRENT

LPV-150: 0.25mA / 240VAC

LPVL-150:0.25mA / 120VAC

OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION

110 ~ 150% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

13.5 ~ 18V

17 ~ 25V

27 ~ 35V

40 ~ 49V

Protection type : Shut down o/p voltage, re-power on to recover

Shut down o/p voltage, recovers automatically after temperature goes down

-25 ~ +65 (Refer to “Derating Curve”)

20 ~ 90% RH non-condensing

-40 ~ +80, 10 ~ 95% RH

±0.03%/ (0 ~ 40 for LPV-150-12,15 and LPVL-150-12,24;0~50 for LPV-150-24,36,48)

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

52 ~ 63V

SAFETY STANDARDS

Blank type

UL8750,CSA C22.2 No 250.13-12,UL879,CSA C22.2 No.207-M89,BIS IS15885(for LPV-150-12,24 only),EAC TP TC 004, IP67, IEC62368-1, BS EN/EN62368-1 approved

L type UL8750(type”HL”),CSA C22.2 No 250.13-12,UL879,CSA C22.2 No.207-M89,IP67 approved

SAFETY & EMC
OTHERS NOTE

WITHSTAND VOLTAGE

I/P-O/P:3KVAC

ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH

EMC EMISSION

Blank type Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A(80% load), BS EN/EN61000-3-3, EAC TP TC 020 L type Compliance to FCC part 15

EMC IMMUNITY

Blank type Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55035, light industry level, EAC TP TC 020 L type Design refer to IEC61000-4-2,3,4,5,6,8,11; light industry level

MTBF

3361.2K hrs min. Telcordia SR-332 (Bellcore) ; 391.9Khrs min. MIL-HDBK-217F (25)

DIMENSION

191*63*37.5mm (L*W*H)

PACKING

LPV-150: 0.74Kg;20pcs/15.8Kg/0.95CUFT; LPVL-150: 0.85Kg;20pcs/17Kg/0.95CUFT

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

, https://www.meanwell.com/serviceDisclaimer.aspx

Downloaded from Arrow.com.

File Name:LPV,LPVL-150-SPEC 2023-04-14

150W Single Output Switching Power Supply

Mechanical Specification

25 AC/N(Blue) AC/L(Brown)

300±20 SJTW 18AWG

5

191 5

63 26

2-4.5

T case

tc

96

5
tc : Max. Case Temperature

5

LPV-150 series

Case No. LPC-150 Unit:mm

300±20 SJTW 14AWG

25
+V(Red) -V(Black)

37.5

3

Recommend Mounting Direction

Block Diagram

EMI FILTER

I/P

&

RECTIFIERS

O.L.P.

POWER SWITCHING
PWM CONTROL

RECTIFIERS &
FILTER

PWM fosc : 6457KHz
+V -V
DETECTION CIRCUIT O.V.P.

Derating Curve

Static Characteristics

100

LPV-150-24,36,48

80

60

LPV-150-12,15

40
LPVL-150 20

-25 -15

0

15

30

40

50

60

65 (HORIZONTAL)

AMBIENT TEMPERATURE ()

100 90 80 70 60 50 40

180 190 200 210 220 230 240 250 260 270 280 305 (Blank type)

90

100

105

120

130 132 (L type)

INPUT VOLTAGE (V) 60Hz

LOAD (%) LOAD (%)

Downloaded from Arrow.com.

File Name:LPV,LPVL-150-SPEC 2023-04-14

References

• Product Liability Disclaimer-MEAN WELL Switching Power Supply Manufacturer
• Global Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer