87558910 JIC Swing-Out Panel Kit
Product Information:
Product Name: JIC Swing-Out Panel Kit
Model Number: 87558910
Product Accessory: Swing-Out Panel Kit
UL/CSA Type: 12, 4, 4X
UL File: E61991
CSA File: LR42186
Product Usage Instructions:
WARNING:
To avoid electric shock and equipment damage, disconnect any
power supplies to the enclosure before drilling mounting holes. Do
not energize any circuits before all internal and external
electrical and mechanical clearances are checked to assure that all
assembled equipment functions safely and properly.
Installation Steps:
- Disconnect any power supplies to the enclosure.
- Mount hinges (Item 7) and brackets (Item 8) using pan head
screws (Item 11) with nylon washers (Item 12) under the screw
heads. - Mount swing panel to hinges (Item 7) with pan head screws (Item
3) and lockwashers (Item 4). Adjust the panel until it swings
freely through the door opening. - Captivate thumb screws (Item 5) to the panel using retaining
rings (Item 6) provided.
Note: Please refer to the product manual for additional
information and safety guidelines.
JIC Swing-Out Panel Kit
Rev. E © 2018 Hoffman Enclosures Inc. PH 763 422 2211 · nVent.com/HOFFMAN P/N 99401468
87558910
WARNING
To avoid electric shock and equipmentdamage, disconnect any
power suppliesto the enclosure before drilling mountingholes. Do not energize any circuits beforeall internal and external electrical andmechanical clearances are checked toassure that
all assembled equipmentfunctions safely and properly.
This accessory maintains UL/CSA Type 12, 4, 4X when installed per these instructions. This accessory is covered by UL file E61991 and CSA file LR42186.
– 2 –
© 2018 Hoffman Enclosures Inc.
PH 763 422 2211 · nVent.com/HOFFMAN
87558910
Installation Steps:
1. Swing panel may be hinged on any side. Determine mounting position desired and drill (8) Ø.172 (4mm) holes as shown.
2. Mount hinges (Item 7) and brackets (Item 8) using pan head screws (Item 11) with nylon washers (Item 12) under the screw heads.
3. Mount swing panel to hinges (Item 7) with pan head screws (Item 3) and lockwashers (Item 4). Adjust panel until it swings freely through the door opening.
4. Captivate thumb screws (Item 5) to panel using retaining rings (Item 6) provided.
87558910
© 2018 Hoffman Enclosures Inc.
PH 763 422 2211 · nVent.com/HOFFMAN
– 3 –
0,1%8//(7,1$&+$1)$6&$/3$’5 67</(&+4521/< 0,1%8//(7,1$/2$0$60 67</(+&/2*$21/< 0,1%8//(7,1$&+$1)$6&$/3$’5 $//27+(567</(6
<
;
%27+6,'(6
<
0,1%8//(7,1$&+$1)$6&$/3$’5 67</(&+4521/< 0,1%8//(7,1$/2$0$60 67</(+&/2*$21/< 0,1%8//(7,1$&+$1)$6&$/3$’5 $//27+(567</(6
<<
– 4 –
© 2018 Hoffman Enclosures Inc.
PH 763 422 2211 · nVent.com/HOFFMAN
87558910
We connect and protect | nVent
