Hagor 3325 Cps Mobile Stand Installation Guide (+ PDF)

Contents hide

1 3325 CPS Mobile Stand

2 Product Information

3 Scope of Delivery

4 Product Usage Instructions

4.1 Documents / Resources

3325 CPS Mobile Stand

Product Information

Product Name: CPS Mobile Stand 2x 55 – 65

Article Number: 3325

Languages: DE (German), GB (English)

Caution: Technical devices are of considerable
value. Handle the components carefully during installation and
protect them if necessary. Secure the installation area to prevent
injuries and material damage. The materials included may not be
suitable for all installation sites. Please check in advance and
replace if necessary. Contact us or other trained specialists if
you have any questions or uncertainties regarding the
installation.

Scope of Delivery

A: 2x
B: 2x
M8x90: 8x
C: 4x
D: 1x
E: 2x
F: 16x
G: 2x
H: 2x
J: 2x
L: 3x
M: 12x
N: 2x
M8x10: 2x
O: 18x
K: 4x
R: 4x
P: 2x
M8x12: 16x
Q: 4x
M5x14: 8x
M-A: 1x
M6x14: 8x
M-B: 1x
M6x30: 8x
M-C: 1x
M8x30: 8x
M-D: 1x
M8x50: 8x
M-E: 1x
Vierkantscheibe Distanzring, klein: 8x
Vierkantscheibe Distanzring, gross: 16x
square washer: 16x
Spacer, small: 8x
Spacer, big: 16x

Product Usage Instructions

Start by assembling the components A, B, and M8x90 as shown in
the diagram.
Attach component A to components C and E.
Connect components H, L, and M as indicated in the
diagram.
Secure component E to component O using screws M8x12 and
component P.
Use screws M8x12 to attach component O to components E and
P.
Fix components M8x10 and N to component O as shown in the
diagram.
Connect components G and E.
Ensure that the arrow on component Q is pointing upward.
Depending on the desired setup, follow either step 9a or 9b in
the diagram.
Connect components M-C, M-D, and M-G, as well as components M-E
and M-H, as indicated in the diagram.
Adjust the dimensions according to your requirements. The
dimensions are provided in the diagram.
Use component R to complete the assembly.
Component K is optional and can be used if needed.
Component F should be used as necessary.

Note: The VESA dimensions for mounting your TV
should be between a minimum of 100mm and a maximum of 400mm.

View Fullscreen

Installationsanleitung
CPS Mobile Stand 2x 55 – 65″ Art.-Nr.: 3325
DE Installationsanleitung GB Installation manual FR Guide d`installation NL Installatievoorschrift ES Guía de instalación SE Installationsanvisning TR Yükleme Rehberi RU CN
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

Achtung!

Technische Geräte stellen einen beträchtlichen Wert dar. Sie sollten daher bei der Installation vorsichtig mit den Komponenten umgehen und diese bei Bedarf schützen.
Auch sollte, falls nötig, der Installtionsbereich abgesichert werden. Herabfallende Teile können zu Verletzungen und Materialschäden führen.
Die im Lieferumfang enthaltenen Materialien sind unter Umständen nicht für die speziellen Gegebenheiten am Installationsort geeignet. Bitte prüfen Sie dies vorab und ersetzen Sie diese bei Bedarf durch geeignete Materialien.
Falls Sie Bezüglich der Installation des Produkts unsicher sind oder noch Fragen haben wenden Sie sich an uns oder anderes ausgebildetes Fachpersonal.

Caution!

Technical devices are of considerable value. You should therefore handle the components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the special conditions at the installation site. Please check this in advance and replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions, please contact us or other trained specialists.

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

Lieferumfang | Scope of delivery

A 2x

B 2x

M8x90 8x

C 4x

D 1x

E 2x

F 16x

G 2x

H 2x

J 2x

L 3x

M 12x

N 2x

M8x10 2x O 18x

K 4x R 4x

P 2x

M8x12 16x

Q 4x

M5x14 8x M-A

M6x14 8x M-B

M6x30 8x M-C

M8x30 8x M-D

M8x50 8x M-E

Vierkantscheibe Distanzring, klein Distanzring, gross

square washer

Spacer, small

Spacer, big

M-F 8x

M-G 16x

M-H 16x

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

A E

M8x90

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

H H
M
4
E O

M8x12

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

M8x12

O 1
1

E
2
E P

M8x10 N

O
M8x10 N

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

7 G E
8
Pfeilrichtung oben With the arrow pointing up
Q Q
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

M-C M-D M-G
M-E
M-H

M-C M-D
M-H
M-E
M-G M-H

M-C M-D
M-G M-H
M-E
M-G M-H

· Verwenden Sie für den Bildschirmtyp geeignete Schrauben, Unterlegscheiben und falls nötig Distanzscheiben. · Zentrieren Sie die VESA-Arme wie in der Zeichnung gezeigt und schrauben sie sie fest. Schrauben nicht zu fest anziehen um Beschädigungen zu vermeiden.
· Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen. · Center the adapter brackets on the back of the display as shown, and screw the brackets onto the display, being sure to not over-tighten.

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

81a0 11
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

12
4mm

R
13
-20°,-15°,-10°,-5°,0°

0°

-5°

-10°

-15°

-20° ist die Grundposition. Auf den Sicherheitsstift kann verzichtet werden.

-20° is the natural angle and the safety pin is unnecessary.

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]

14 K
15 option
F
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]