SLV1010B-8001280 Series LVDS Interface TFT LCD Module

Product Information: LVDS Interface TFT LCD Module

The LVDS Interface TFT LCD Module from Shenzhen Surenoo
Technology Co., Ltd. is a SLV1010B-8001280 Series color active
matrix thin film transistor (TFT) liquid crystal display. It uses
amorphous silicon TFT as a switching device and is composed of a
TFT LCD panel and a driving circuit. The TFT LCD has a 10.1 (16:9)
inch diagonally measured active display area with (800 horizontal
by 1280 vertical pixel) resolution.

Features:

• 10.1(16:9 diagonal) inch configuration
• Image Reversion: UP/DOWN and LEFT/RIGHT
• ROHS design

General Information:

Absolute Maximum Ratings:

Optical Characteristics:

Product Usage Instructions:

To use the LVDS Interface TFT LCD Module, follow these
steps:

1. Connect the LVDS interface to your device.
2. Apply power within the operating temperature range of -10℃ to
   50℃.
3. Use the TFT LCD panel and driving circuit to display images
   with a resolution of 800 horizontal by 1280 vertical pixels.
4. Use the Image Reversion feature to flip the display vertically
   or horizontally if needed.
5. Follow the General Precaution guidelines to prevent permanent
   damage to the LCD module.

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLV1010BA3-8001280

SLV1010B-8001280 Series
LVDS Interface TFT LCD Module USER MANUAL
Please click the following image to buy the sample

6KHQ¼KHQ6XUHQRR7HFKQR¹RJ»&R/WG ºººVXUHQRRFRP 6¸»SH·6X UHQRR

Reference Controller Datasheet
LVDS Interface LCD Module Selection Guide

www.surenoo.com

P 01

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLV1010BA3-8001280

Content

1 General Description 2 Absolute Maximum Ratings 3 Optical Characteristics 4 Block Diagram 5 Interface Pin Connection 6 Electrical Characteristics 7 Reliability Test Items 8 Outline Dimension 9 Packing Form 10 General Precaution

www.surenoo.com

P 02

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLV1010BA3-8001280

1.0General Description
1.1 Introduction
SLV1010B-8001280 color active matrix thin film transistor (TFT) liquid crystal display that
uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel and a driving circuit.This TFT LCD has a 10.1 (16:9) inch diagonally measured active display area with (800 horizontal by 1280 vertical pixel) resolution.

1.2. Features

10.1(16:9 diagonal) inch configuration Image Reversion: UP/DOWN and LEFT/RIGHT ROHS design

1.3. General information

Item Outline Dimension LCD Display area Number of Pixel Pixel pitch Pixel arrangement Display mode Color Filter Array Luminous Weight Interface

Specification 143(H) x 228.6V) x2.6(D) 135.36(H) x 216.58 (V) 800(H) x3(RGB)x 1280 (V) 0.1692(H) x 0.1692 (V) RGB Vertical stripe IPS(Normal Black) RGB vertical stripes TYP=350nits TBD LVDS interface

Unit mm mm pixels mm
nits g

www.surenoo.com

P 03

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLV1010BA3-8001280

2.0 Absolute Maximum Ratings 2.1 Environment Absolute Rating

Item Operating Temperature Storage Temperature
2.2 Back-light Unit:

Symbol Topa Tstg

Min.

Max.

Unit

-10

50

-20

60

Note

PARAMETER LED Voltage
PWM Enable

Sym. VLED PEM LED_EN

Min. 2.5 100 2.5

Typ. —

Max. 14
200K 5.5

Unit Test Condition Note

V

­

­

Hz Duty=5%~100%

V

Life Time

­

20000

­

Hr.

­

Color

White

Note (1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation

should be restricted to the conditions described under normal operating conditions.

(2)Ta=25±2

www.surenoo.com

P 04

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLV1010BA3-8001280

3.1 Optical Characteristics

Item Response Time Contrast Ratio

Symbol
Tr Tf Tr+Tf CR

Condition Min

Typ

Uni Max t

Remark

–

10

20

= 0°

–

15

30 ms Note 3

–

25

–

= 0°

800 100

–

Note 2,4

Top(12 o’clock)

80

85

Viewing Angle

Bottom(6 o’clock)

80

85

CR10

Left(9 o’clock)

80

85

Right(3 o’clock)

80

85

–
deg Note 1
–

Wx

Wy

Color Chromaticity
Cross Talk Transmittance

Rx Ry Gx Gy Bx By Ct Trans

Luminance

L

Luminance uniformity

YU

3.2 Measuring Condition
Measuring surrounding : dark room

Ambient temperature : 25±2 30min. warm-up time.

3.3 Measuring Equipment

TOPCON BM-7

www.surenoo.com

= 0° = 0°

0.293 0.313 0.343

0.299 0.329 0.359

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

1.2 %

–

4.58

300 350

-%

–

cd/

70

75

-%

Note 5 Note 6

Measuring spot size : field 2°

P 05

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Note (1) Definition of Vsat and Vth (at 20)
Note (2) Definition of Viewing Angle :

Model No.: SLV1010BA3-8001280

Note (3) Definition of Contrast Ratio(CR) : measured at the center point of panel

CR =

Luminance with all pixels white Luminance with all pixels black

Note (4) Definition of Response Time : Sum of TR and TF

www.surenoo.com

P 06

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Definition of optical measurement setup

Model No.: SLV1010BA3-8001280

Definition of brightness uniformity

1/6

2/6

2/6

1/6

2/6 1/6

7

8

9

4

5

6

1

2

3

1/6 2/6

Rubbing Direction (The different Rubbing Direction will cause the different optima view direction.
4.0 Block Diagram 4.1 TFT-LCD Module

www.surenoo.com

P 07

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

4.1 Interface pin define:
ConnectorDF14-20P-1.25H

Model No.: SLV1010BA3-8001280

www.surenoo.com

P 08

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLV1010BA3-8001280

6. Electrical Characteristics 6.1 TFT LCD Module

Item Power Supply VLED
Input signal voltage
Power Current

Symbol VDD3V3
VLED VIH VIL
IVDD3V3

Min. 3.0 5 0.7DVDD 0
–

Typ.
135

Max. 3.3 14 DVDD 0.3DVDD —

Unit V V V V mA

6.2 LVDS input format Only Support 8bit LVDS

Note

www.surenoo.com

P 09

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

6.3 LVDS input timing

Model No.: SLV1010BA3-8001280

www.surenoo.com

P 10

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

6.4 POWER ON/OFF sequence

Model No.: SLV1010BA3-8001280

www.surenoo.com

P 11

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLV1010BA3-8001280

7.0 Reliability test items

NO

Item

1 High Temperature Storage

2 Low Temperature Storage

3 High Temperature Operation

4 Low Temperature Operation

5

High Temperature and High Humidity (operation)

6

Thermal Cycling Test (non operation)

7

Vibration

8

Shock

9

Vibration (with carton)

10

Drop (with carton)

11

Electrostatic Discharge

Conditions Ta=+60,48hrs Ta=-20,48hrs Ta=+50,48hrs Ta=-10,48hrs
Ta=+40,80%RH,48hrs
-20(0.5hr)+60(0.5hr),100cycles
1.Random:1.04G,10-500HZ,X,Y,Zdirection 30min/each direction 2.Sweep sine:1.5G, 5~500Hz, X/Y/Z,30min/each direction
100G,6ms, ±X, ±Y, ±Z 3 time for each direction Random:1.04Grms, 10~500Hz, X/Y/Z 45min/each direction Fixed:5Hz, 1.5Grms, X/Y/Z 45min/each direction Height: 60cm 1 corner, 3 edges, 6 surfaces ±200V,200PF,01 time/each terminal

Remark
JIS C7021, A-10 (Condition A)
JIS Z0202

Note: All tests above are practiced at module type. There is no display function NG issue occurred, All the cosmetic specification is judged before the reliability
stress.

www.surenoo.com

P 12

P 13

Model No.: SLV1010B-3A8001280

1
RoHS
D

2

3

4

C

5

6

7

8

D

C

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
8.0 Outline dimension

B

B

ITEM

SYMBOL MIN TYP MAX UNIT

Luminous (Without PET)

IV

300 350

cd/m 2

Chromaticity Coordinatses

Without PET

A

Uniformity

Backlight voltage

Backlight current

X (0.260)

(0.400)

Y (0.260) 70

(0.450) %

VF 14.25 15.25 16.25 V

IF

120

mA

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

TYPE
MODEL NO.
PART NO.

SLV1010B-8001280

1

2

3

4

5

MATERIAL
EDITION
DATE
6

PAGE

1/1

7

APPROVED
CHECK
DESIGNED

A 8

www.surenoo.com

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLV1010BA3-8001280

10.0 General Precaution

10.1 Use Restriction

This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.

10.2 Asembly Precaytton

10.2.1 Please use the mounting hole on the module side in installing and do not bending or wrenching LCD in assembling. And please do not drop, bend or twist LCD module in handling. 10.2.2 Please design display housing in accordance with the following guide lines. 10.2.2.1 Housing case must be destined carefully so as not to put stresses on LCD all sides and not to wrench module. The stresses may cause non-uniformity even if there is no non-uniformity statically. 10.2.2.2 Keep sufficient clearance between LCD module back surface and housing when the LCD module is mounted. The clearance in the design is recommended taking into account the tolerance of LCD module thickness and mounting structure height on the housing. 10.2.3 Please do not push or scratch LCD panel surface with any-thing hard. And do not soil LCD panel surface by touching with bare hands. ( Polarizer film, surface of LCD panel is easy to be flawed.) 10.2.4 Please do not press any parts on the rear side such as source IC, gate IC, and FPC during handling LCD module. If pressing rear part is unavoidable, handle the LCD module with care not to damage them. 10.2.5 Please wipe out LCD panel surface with absorbent cotton or soft cloth in case of it being soiled. 10.2.6 Please wipe out drops of adhesives like saliva and water on LCD panel surface immediately. They might damage to cause panel surface variation and color change. 10.2.7 Please do not take a LCD module to pieces and reconstruct it. Resolving and reconstructing modules may cause them not to work well.

10.3 Disassembling or Modification

Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.

10.4 Breakage of LCD Panel

10.4.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin. 10.4.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately. 10.4.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 10.4.4 Handle carefully with chips of glass that may cause injury, when the glass is broken.

www.surenoo.com

P 14

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLV1010BA3-8001280

10.5 Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged. 10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time. 10.5.3 It’s recommended employing protection circuit for power supply. 10.6 Operation 10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly. 10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other soft material. 10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading. 10.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent.
10.7 Static Electricity
10.7.1 Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence. 10.7.2 Because LCD module uses CMOS-IC on TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. 10.7.3 Persons who handle the module should be grounded through adequate methods.
10.8 Disposal
When disposing LCD module, obey the local environmental regulations.
10.9 OTHERS
10.9.1 A strong incident light into LCD panel might cause display characteristics’ changing inferior because of polarizer film, color filter, and other materials becoming inferior. Please do not expose LCD module direct sunlight land strong UV rays. 10.9.2 Please pay attention to a panel side of LCD module not to contact with other materials in preserving it alone. 10.9.3 For the packaging box, please pay attention to the followings: 10.9.3.1 Packaging box and inner case for LCD are designed to protect the LCDs from the damage or scratching during transportation. Please do not open except picking LCDs up from the box. 10.9.3.2 Please do not pile them up more than 6 boxes. (They are not designed so.) And please do not turn over. 10.9.3.3 Please handle packaging box with care not to give them sudden shock and vibrations. And also please do not throw them up. 10.9.3.4 Packing box and inner case for LCDs are made of cardboard. So please pay attention not to get them wet. (Such like keeping them in high humidity or wet place can occur getting them wet.)
www.surenoo.com

P 15