TH-SF0201 1-Light White Capiz Style Shell Chandelier
Product Information
The Chandelier SKU#TH-SF0201 is a lighting fixture designed for
installation in dry locations. It is rated for up to 60-watt
maximum TYPE A bulbs, 13-watt compact fluorescent light bulbs, or
9-watt LED bulbs. This product can be dimmed with a standard
incandescent dimmer. Please follow the safety precautions and
assembly instructions provided below to ensure proper installation
and usage of the product.
Product Usage Instructions
- Before starting the installation of the light fixture, turn off
the electrical power. - Ensure you have the necessary wiring supplies as required by
the local electrical code. - This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved. - To clean the fixture, turn off the power, wait for it to cool,
and wipe it with a clean, soft cloth. Never spray cleaner directly
onto the fixture. - Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect
in the wire, do not attempt installation. - Follow the assembly steps below to assemble the
chandelier:- Junction Box
- Single Mounting Bracket
- Canopy Screws (2)
- Canopy
- Rods (4)
- Fixture
- Cup
- Bulb
- Leading Wires (not included)
- Fixture Wires
- Wire Nuts (4)
- Mounting Screws (3)
- Refer to the troubleshooting section below if you encounter any
issues:Problem Possible Cause Solution The bulb will not light. There is a faulty wire connection. Check the wiring. The circuit breaker is OFF. Ensure the circuit breaker is in the ON position. The fuse blows or circuit breaker trips when the light is
turned ON.There are crossed wires or the power wire is grounding
out.Check the wire connections. Contact a qualified
electrician.
Assembly Instructions
CHANDELIER SKU#TH-SF0201
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
SAFETY PRECAUTIONS:
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE. 2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE. 3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH. NEVER SPRAY CLEANER DIRECTLY ONTO THE FIXTURE.
NOTE: Product may not look exactly as shown in figures. CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
This fixture has been rated for up to 60-watt maximum TYPE A bulbs or 13-watt compact fluorescent light bulbs or 9-watt LED bulbs . To avoid the risk of fire, do not exceed the recommended wattage. This product is safety listed for dry locations. This product may be dimmed with a standard incandescent dimmer.
Assembly Steps:
1. J
H
2. G
H
3. F
G
4. C,D
A
5. L,M
B
6. F,E
C
7. K
J
WHITE SUPPLY WIRE
BLACK SUPPLY WIRE
WHITE OR IDENTIFIED FIXTURE WIRE UL LISTED WIRE NUTS
PLAIN OR BLACK FIXTURE WIRE
ALAMBRE DEL SUMINSTRO BLANCO
ALAMBRE DEL SUMINSTRO NEGRO
ALAMBRE BLANCO O IDENTIFICADO DE LA LAMPARA
CONECTADOR UL CALIFICADO ALAMBRE NEGRO O NEUTRO DE LA LAMPARA
BARE, OR GREEN GROUND WIRE FROM SUPPLY
BARE, OR GREEN FIXTURE GROUND
WIRE
OR BARE, OR GREEN
GROUND WIRE FROM SUPPLY
GREEN GROUND SCREW
ALAMBRE DE TIERRA
VERDE O NEUTRO DEL SUMINISTRO
ALAMBRE DE TIERRA VERDE O NEUTRO DE LA LAMPARA
O ALAMBRE DE TIERRA
VERDE O NEUTRO DEL SUMINISTRO
TORNILLO DE TIERRA VERDE
Part Included
Code
Part Description
QTY
A Junction Box
0
C Single Mounting Bracket
1
E Canopy Screws
2
F Canopy
1
G rods
4
H Fixfure
1
6″
J Cup
1
K Bulb
1
12″
L Leading Wires
0
M Fixfure Wires
1
12″
12″
Hardware included
B Wire Nuts
4
D Mounting Screws
3
Trouble Shooting
Problem
Possible Cause
Solution
The power is OFF.
Ensure the power supply is ON.
The bulb will not light. There is a faulty wire connection. Check the wiring.
The circuit breaker is OFF.
Ensure the circuit breaker is in the ON position.
The fuse blows or circuit breaker trips when the light is turned ON.
There are crossed wires or the power wire is grounding out.
Check the wire connections. Contact a qualified electrician.
