JYL9550A Elisana 26 Inch 4-Light LED Semi Flush Mount
Product Information:
This product is a lighting fixture that requires installation by
a licensed electrician. It is important to switch off the main
electrical supply from the main fuse box/circuit breaker before
installation. The item should be carefully inspected before
attempting to install, and if there is any damage or obvious
defect, it should not be installed. Please note that once the item
has been installed, it may not be returned.
For safe use and installation, please follow the important
safety instructions provided in the manual. The external flexible
cable or cord of this lamp cannot be replaced, and if the cord is
damaged, the lamp should be destroyed.
The product dimensions are 26D X 13H. The package includes
various parts such as a mounting bracket, green ground screw,
outlet box screw, fixture body, knurled nut, crystal branch,
crystal string, light bulb, hex spanner, and wire connectors.
It is recommended to assemble the product on a soft surface to
prevent scratching the finish during assembly. The estimated
assembly time is 20 minutes.
The lamp requires specific types of bulbs for optimal
performance. Please use a Type B bulb with a maximum wattage of
40W, or a CFL bulb with a maximum wattage of 13W, or an LED bulb
with a maximum wattage of 9W. The package includes 4pcs LED 4Watt
bulbs.
Product Usage Instructions:
- Attach the crystal branch (H) to the slot (H1) using the hex
spanner (G). - Attach the mounting bracket (A) to the junction box with the
outlet box screw (C). - Connect the hot, black or red outlet supply wire to the
parallel cord (round & smooth) and the neutral, white outlet
supply wire to the parallel cord (square & ridged). - Raise the canopy (L) and thread it onto the threaded rod (M),
then secure it with the knurled nut (E). - Attach the crystal string (I) to the hole (J).
- Install the light bulb (F) into the socket. Please use a Type B
bulb with a maximum wattage of 40W, or a CFL bulb with a maximum
wattage of 13W, or an LED bulb with a maximum wattage of 9W. There
are 4pcs LED 4Watt bulbs included in the package.
Once assembled and installed, you can enjoy your lamp.
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean clorth (use clean water, never a solvent) to wipe the interior surface of the fixture. Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE
A
mounting bracket
B
green ground screw
C
outlet box screw
1X
F
light bulb
1X
G hex spanner
2X
H crystal branch
D fixture body
1X
I crystal string
E knurled nut
2X
K
wire connector
QUANTITY 4X 1X 9X 1X 3X
Model#: JYL9550A Product Dimensions: 26″D X13″H
1/2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
1. Attach the crystal branch (H) to the slot (H1), tighten with hex spanner (G).
2. Attach the mounting bracket (A) to the junction box with outlex box screw (C).
Connect, Hot, Black or Red Outlet Supply Wire to:
Connect, Neutral, White Outlet Supply Wire to:
Black * Parallel Cord (round & smooth)
White * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions: a) For installation in the United States: Wrap ground wire from outlet box around green ground screw(B) on mounting bracket, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector. b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting bracket. Tighten ground screw. 3 Connect the wire with wire connector (K).
4. Raise the canopy (L) thread to the threaded rod (M), secure with knurled nut (E).
5. Attach the crystal string (I) to the hole (J).
7. Install the light bulb (F) to the socket.
PLEASE USE TYPE”B” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9WATT, THERE ARE 4PCS LED 4-WATT BULB IN THE BOX
ENJOY YOUR LAMP
2/2
