SWB7210 Tripod TV Floor Stand
Product Information: TV Floor Stand
The TV Floor Stand is a product designed to hold your television
securely in place for an optimal viewing experience. This product
is manufactured by Sinox Europe A/S, located at Troensevej 11,
DK-9220 Aalborg. The TV Floor Stand is available in two models:
SWB7210 and SWB7220.
Installation and Assembly
Before installation and assembly, it is important to read the
entire instruction manual carefully. If you have any questions or
concerns regarding the instructions or warnings, please contact
your local distributor for assistance.
It is also crucial to ensure that you have received all parts
listed on the component checklist prior to installation. In case
any parts are missing or faulty, contact your place of purchase for
a replacement.
Maintenance
To ensure safety and proper usage, it is recommended to check
that the product is secure and safe to use at regular intervals, at
least every three months.
Usage Instructions
- Place the TV Floor Stand on a flat surface where you want to
set up your television. - Insert the vertical poles into the base of the stand and secure
them in place using screws and nuts provided in the package. - Attach the brackets to the poles using screws and nuts provided
in the package. - Attach the brackets to the back of your television using screws
and nuts provided in the package. - Carefully lift your television and attach it to the brackets on
the stand. - Adjust the height and angle of your television as per your
preference.
Please note that these are general usage instructions. For
specific instructions, please refer to the instruction manual
provided in the package.
TV Floor Stand
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury. . Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury. . Safety gear and proper tools must be used. This product should only be installed by professionals. . Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. . Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws. . This product contains small items that could be a choking hazard if swallowed. Keep these items away from children. . This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).
SWB7210 / SWB7220
Sinox Europe A/S Troensevej 11. DK-9220 Aalborg
www.sinox-europe.com
Sinox Europe
