CA2264-FM Brushed Nickel Motion Sensor LED Flush Mount
Product Information
The LED Flush Mount Fixture is a dimmable product that requires
120VAC/60Hz input. It is designed to be installed in accordance
with local and National Electrical Code (N.E.C.) standards. The
fixture comes with a mounting bracket, mounting screws, fixture
screws, wire connector, acrylic shade, ring and cap nut. It is an
integrated LED fixture with no bulbs to replace. The color
temperature of the fixture is switchable and can be changed by
switching the button on the ceiling pan to select colors from 3000K
to 4000K and 5000K.
Product Usage Instructions
- Before installing or servicing the fixture, turn off the main
power at the circuit breaker to prevent possible injury from
electric shock. - Pull the supply wires (5 & 6) and the house ground wire (7)
out from the outlet box (1) and attach the mounting bracket (2) to
the outlet box using the slotted holes on the mounting bracket (2)
and the mounting screws (3) provided. - Thread the fixture screws (4) into the appropriate threaded
holes of the mounting bracket (2). - Connect the power supply wires to the fixture lead wires by
connecting the black fixture wire (9) to the black supply wire (6),
and the white fixture wire (8) to the white supply wire (5) using
wire connector (11). Connect the fixture ground wire (7) to the
supply ground wire (10) by fixing it on the mounting bracket
(2). - Carefully tuck all wiring back into the outlet box. Raise the
fixture pan (12) to the mounting surface allowing for mounting
screws(4) to protrude through key slots. Rotate the fixture pan
(12) clockwise until screws are in narrow part of key slots, and
tighten securely. - Secure the lens (13) and ring (14) to the fixture pan (12)
using three cap nuts (15). - Restore power at the circuit breaker and turn light switch on
to activate this fixture.
The Radar LED dusk to dawn wall light with motion sensing is
designed to turn on when motion is detected in range and natural
light is less than 15 Lux. It will keep on when motion is
continuing in range and natural light is greater than 15 Lux. If
natural light is greater than 15 Lux and motion stops or leaves the
detect range, the light will auto off within 30 seconds. The
detection range of the light is 12-18 FT.
INSTALLATION INSTRUCTIONS LED FLUSH MOUNT FIXTURE
120VAC/60Hz Input, Dimmable
READ AND FOLLOW SAFETY INFORMATON
CAUTION – Turn off the main power at the circuit breaker before
installing and servicing the fixture to prevent possible injury from electric shock. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
INSTALLATION & ASSEMBLEY
1. Pull the SUPPLY WIRES (5 & 6) and the HOUSE GROUND WIRE (7) out from the OUTLET BOX (1)and attach the MOUNTING BRACKET (2) to the OUTLET BOX using the slotted holes on the MOUNTING BRACKET (2) and the MOUNTING SCREWS (3) provided.
2. Thread the FIXTURE SCREWS(4) into the appropriate threaded holes of the MOUNTING BRACKET (2).
3. Connect the power supply wires to the fixture lead wires by connecting the BLACK FIXTURE WIRE (9) to the BLACK SUPPLY WIRE (6), and the WHITE FIXTURE WIRE (8) to the WHITE SUPPLY WIRE (5) using WIRE CONNECTOR (11). Connect the fixture GROUND WIRE (7) to the SUPPLY GROUND WIRE (10) by fixed on the MOUNTING BRACKET (2).
4. Carefully tuck all wiring back into the OUTLET BOX. Raise the fixture pan (12) to mounting surface allowing for mounting screws(4) to protrude through key slots. Rotate the FIXTURE PAN (12) clockwise until screws are in narrow part of key slots, and tighten securely.
5.Color Temperature Switchable: Could change colors easily by switching the button on ceiling pan to select colors from 3000K to 4000K and 5000K.
6. Final assembly- Secure the lens (13) and ring (14) to fixture pan (12) using three cap nuts (15).
7. Installation complete, restore power at the circuit breaker and turn light switch on to activate this fixture. 8. This is integrated led fixture, no bulbs to replace
1.OUTLET BOX (EXCLUDED) 2. MOUNTING BRACKET 3. MOUNTING SCREW 4. FIXTURE SCREW 5. WHITE SUPPLY WIRE 6. BLACK SUPPLY WIRE 7. HOUSE GROUND WIRE 8. WHITE FIXTURE WIRE
9. BLACK FIXTURE WIRE 10. FIXTURE GROUND WIRE 11. WIRE CONNECTOR 12. FIXTURE PAN 13. ACRYLIC SHADE 14.RING 15.CAP NUT 16.Color Temperature Switchable
Radar LED dusk to dawn wall light with motion sensing
When natural light > 15 Lux,the light will auto off even if motion is detected.
When natural light < 15 Lux,the light will turn on when motion is
detected in range.
When natural light > 15 Lux,the light will keep on when motion is
continuing in range.
When natural light < 15 Lux,the light will auto off whthin 30 seconds when motion stop or leave the detect range.
12-18 FT
