9046095 4 In Form Bender
Product Information:
The product is a tool that is designed for use in a work area.
It comes with specific safety precautions that the operator must
follow to reduce the risk of personal injury and/or damage to the
equipment. The tool requires assembly and installation, and it is
important to wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI) to ensure personal safety.
Product Usage Instructions:
- Work Area: Use the tool only in a work area
that is clean, dry, and well-lit. Do not use the tool in damp or
wet locations. - Personal Safety: Wear personal protective
equipment approved by the CSA or ANSI, including eye protection,
hearing protection, and appropriate clothing. - Specific Safety Precautions: Follow all safety
precautions outlined in the manual. DO NOT let comfort or
familiarity with the product replace strict adherence to the tool
safety rules. - Unpacking: Before using the tool, ensure that
all parts are present and properly assembled. DO NOT operate the
tool if any part is missing. Replace the missing part before
operating. - Assembly & Installation: Follow the
instructions provided in the manual for assembly and installation
of the tool. Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the user
and/or others. - Operation: Follow all instructions for safe
operation of the tool. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury. - Care & Maintenance: Keep the tool clean
and well-maintained. Follow the instructions provided in the manual
for lubrication. NEVER use a penetrating oil to lubricate the tool.
Penetrating oil may act as a solvent that can break down the grease
and cause the tool to seize up. - Disposal: DO NOT pollute the environment by
allowing uncontrolled discharge of waste oil. Dispose of waste oil
properly.
SPECIFICATIONS HAZARD DEFINITIONS
INTRODUCTION
SAFETY
WARNING! Read and understand all instructions before using this tool. The operator must follow basic precautions to reduce the risk of personal injury and/or damage to the equipment.
WORK AREA
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
PERSONAL PRECAUTIONS
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to the tool safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating. Failure to do so could result in a malfunction and personal injury.
ASSEMBLY & INSTALLATION
GENERAL ASSEMBLY
WORKPIECE STOP
OPERATION
CARE & MAINTENANCE
WARNING! Only qualified service personnel should repair the tool. An improperly repaired tool may present a hazard to the user and/or others.
LUBRICATION
NOTICE! NEVER use a penetrating oil to lubricate the tool. Penetrating oil may act as a solvent that can break down the grease and cause the tool to seize up.
DISPOSAL
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled discharge of waste oil.
TROUBLESHOOTING
PARTS BREAKDOWN
PARTS LIST
# DESCRIPTION
QTY
SPÉCIFICATIONS
DÉFINITIONS DE DANGER
INTRODUCTION
SÉCURITÉ
AVERTISSEMENT ! Veuillez lire et comprendre toutes les instructions avant d’utiliser cet outil. L’utilisateur doit respecter les précautions de base lorsqu’il utilise cet outil afin de réduire le risque de blessure ou de dommage à l’équipement.
AIRE DE TRAVAIL
SÉCURITÉ PERSONNELLE
AVERTISSEMENT ! Portez de l’équipement de protection personnelle homologué par l’Association canadienne de normalisation (CSA) ou l’American National Standards Institute (ANSI).
ÉQUIPEMENT DE PROTECTION PERSONNELLE PRÉCAUTIONS PERSONNELLES
CONSIGNES DE SÉCURITÉ SPÉCIFIQUES
AVERTISSEMENT! Ne permettez PAS au confort ou à votre familiarisation avec l’outil (obtenus après un emploi répété) de se substituer à une adhésion stricte aux règles de sécurité de l’outil. Si vous utilisez cet outil de façon dangereuse ou incorrecte, vous pouvez subir des blessures corporelles graves.
DÉBALLAGE
AVERTISSEMENT ! Ne faites pas fonctionner l’outil si des pièces sont manquantes. Remplacez les pièces manquantes avant l’utilisation. Le non-respect de cet avertissement peut entraîner une défectuosité et des blessures graves.
ASSEMBLAGE ET INSTALLATION
ASSEMBLAGE GÉNÉRAL
BUTÉE DE PIÈCE À TRAVAILLER
UTILISATION SOIN ET ENTRETIEN
AVERTISSEMENT ! Seul un personnel d’entretien qualifié doit effectuer la réparation de l’outil. Un outil mal réparé peut présenter un risque pour l’utilisateur et/ou pour les autres.
LUBRIFICATION
AVIS ! N’utilisez JAMAIS une huile pénétrante pour lubrifier l’outil. Une huile pénétrante peut agir comme un solvant qui provoque la décomposition de la graisse interne et le grippage de l’outil.
MISE AU REBUT
IMPORTANT ! Veillez à NE PAS polluer en évitant le rejet d’huile usée dans l’environnement.
DÉPANNAGE
RÉPARTITION DES PIÈCES
LISTE DES PIÈCES
No DESCRIPTION
QTY
